diff options
| author | Dmitry Baryshkov <dmitry.baryshkov@linaro.org> | 2022-07-11 12:21:16 +0300 |
|---|---|---|
| committer | Douglas Anderson <dianders@chromium.org> | 2022-07-19 20:10:05 +0300 |
| commit | 2dbeef82d14fda3b15d40c94522bdf83f9c33ae8 (patch) | |
| tree | 95dd9670f9d1c2ab5f6efd6853dc3b1e6fb638a5 /drivers/gpu/drm/bridge | |
| parent | 6d602e031103fb78dbe50dbf57a5f29737494c6f (diff) | |
| download | linux-2dbeef82d14fda3b15d40c94522bdf83f9c33ae8.tar.xz | |
drm/bridge: ti-sn65dsi86: fetch bpc using drm_atomic_state
Rather than reading the pdata->connector directly, fetch the connector
using drm_atomic_state. This allows us to make pdata->connector optional
(and thus supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR).
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711092117.360797-2-dmitry.baryshkov@linaro.org
Diffstat (limited to 'drivers/gpu/drm/bridge')
| -rw-r--r-- | drivers/gpu/drm/bridge/ti-sn65dsi86.c | 22 |
1 files changed, 16 insertions, 6 deletions
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index d6dd4d99a229..b362a7bf4d97 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -779,9 +779,9 @@ static void ti_sn_bridge_set_dsi_rate(struct ti_sn65dsi86 *pdata) regmap_write(pdata->regmap, SN_DSIA_CLK_FREQ_REG, val); } -static unsigned int ti_sn_bridge_get_bpp(struct ti_sn65dsi86 *pdata) +static unsigned int ti_sn_bridge_get_bpp(struct drm_connector *connector) { - if (pdata->connector->display_info.bpc <= 6) + if (connector->display_info.bpc <= 6) return 18; else return 24; @@ -796,7 +796,7 @@ static const unsigned int ti_sn_bridge_dp_rate_lut[] = { 0, 1620, 2160, 2430, 2700, 3240, 4320, 5400 }; -static int ti_sn_bridge_calc_min_dp_rate_idx(struct ti_sn65dsi86 *pdata) +static int ti_sn_bridge_calc_min_dp_rate_idx(struct ti_sn65dsi86 *pdata, unsigned int bpp) { unsigned int bit_rate_khz, dp_rate_mhz; unsigned int i; @@ -804,7 +804,7 @@ static int ti_sn_bridge_calc_min_dp_rate_idx(struct ti_sn65dsi86 *pdata) &pdata->bridge.encoder->crtc->state->adjusted_mode; /* Calculate minimum bit rate based on our pixel clock. */ - bit_rate_khz = mode->clock * ti_sn_bridge_get_bpp(pdata); + bit_rate_khz = mode->clock * bpp; /* Calculate minimum DP data rate, taking 80% as per DP spec */ dp_rate_mhz = DIV_ROUND_UP(bit_rate_khz * DP_CLK_FUDGE_NUM, @@ -1016,12 +1016,21 @@ static void ti_sn_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_bridge_state *old_bridge_state) { struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge); + struct drm_connector *connector; const char *last_err_str = "No supported DP rate"; unsigned int valid_rates; int dp_rate_idx; unsigned int val; int ret = -EINVAL; int max_dp_lanes; + unsigned int bpp; + + connector = drm_atomic_get_new_connector_for_encoder(old_bridge_state->base.state, + bridge->encoder); + if (!connector) { + dev_err_ratelimited(pdata->dev, "Could not get the connector\n"); + return; + } max_dp_lanes = ti_sn_get_max_lanes(pdata); pdata->dp_lanes = min(pdata->dp_lanes, max_dp_lanes); @@ -1047,8 +1056,9 @@ static void ti_sn_bridge_atomic_enable(struct drm_bridge *bridge, drm_dp_dpcd_writeb(&pdata->aux, DP_EDP_CONFIGURATION_SET, DP_ALTERNATE_SCRAMBLER_RESET_ENABLE); + bpp = ti_sn_bridge_get_bpp(connector); /* Set the DP output format (18 bpp or 24 bpp) */ - val = (ti_sn_bridge_get_bpp(pdata) == 18) ? BPP_18_RGB : 0; + val = bpp == 18 ? BPP_18_RGB : 0; regmap_update_bits(pdata->regmap, SN_DATA_FORMAT_REG, BPP_18_RGB, val); /* DP lane config */ @@ -1059,7 +1069,7 @@ static void ti_sn_bridge_atomic_enable(struct drm_bridge *bridge, valid_rates = ti_sn_bridge_read_valid_rates(pdata); /* Train until we run out of rates */ - for (dp_rate_idx = ti_sn_bridge_calc_min_dp_rate_idx(pdata); + for (dp_rate_idx = ti_sn_bridge_calc_min_dp_rate_idx(pdata, bpp); dp_rate_idx < ARRAY_SIZE(ti_sn_bridge_dp_rate_lut); dp_rate_idx++) { if (!(valid_rates & BIT(dp_rate_idx))) |