drm/mst: Refactor the flow for payload allocation/removement

[Why]
Today, the allocation/deallocation steps and status is a bit unclear.

For instance, payload->vc_start_slot = -1 stands for "the failure of
updating DPCD payload ID table" and can also represent as "payload is not
allocated yet". These two cases should be handled differently and hence
better to distinguish them for better understanding.

[How]
Define enumeration - ALLOCATION_LOCAL, ALLOCATION_DFP and ALLOCATION_REMOTE
to distinguish different allocation status. Adjust the code to handle
different status accordingly for better understanding the sequence of
payload allocation and payload removement.

For payload creation, the procedure should look like this:
DRM part 1:
* step 1 - update sw mst mgr variables to add a new payload
* step 2 - add payload at immediate DFP DPCD payload table

Driver:
* Add new payload in HW and sync up with DFP by sending ACT

DRM Part 2:
* Send ALLOCATE_PAYLOAD sideband message to allocate bandwidth along the
  virtual channel.

And as for payload removement, the procedure should look like this:
DRM part 1:
* step 1 - Send ALLOCATE_PAYLOAD sideband message to release bandwidth
           along the virtual channel
* step 2 - Clear payload allocation at immediate DFP DPCD payload table

Driver:
* Remove the payload in HW and sync up with DFP by sending ACT

DRM part 2:
* update sw mst mgr variables to remove the payload

Note that it's fine to fail when communicate with the branch device
connected at immediate downstrean-facing port, but updating variables of
SW mst mgr and HW configuration should be conducted anyway. That's because
it's under commit_tail and we need to complete the HW programming.

Changes since v1:
* Remove the set but not use variable 'old_payload' in function
  'nv50_msto_prepare'. Catched by kernel test robot <lkp@intel.com>

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807025639.1612361-3-Wayne.Lin@amd.com

1 files changed, 100 insertions, 59 deletions

diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c
index 4d80426757ab..e04f87ff755a 100644
--- a/drivers/gpu/drm/display/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c
@@ -3255,15 +3255,15 @@ out_get_port:
 }
 EXPORT_SYMBOL(drm_dp_send_query_stream_enc_status);
 
-static int drm_dp_create_payload_step1(struct drm_dp_mst_topology_mgr *mgr,
-				       struct drm_dp_mst_atomic_payload *payload)
+static int drm_dp_create_payload_at_dfp(struct drm_dp_mst_topology_mgr *mgr,
+					struct drm_dp_mst_atomic_payload *payload)
 {
 	return drm_dp_dpcd_write_payload(mgr, payload->vcpi, payload->vc_start_slot,
 					 payload->time_slots);
 }
 
-static int drm_dp_create_payload_step2(struct drm_dp_mst_topology_mgr *mgr,
-				       struct drm_dp_mst_atomic_payload *payload)
+static int drm_dp_create_payload_to_remote(struct drm_dp_mst_topology_mgr *mgr,
+					   struct drm_dp_mst_atomic_payload *payload)
 {
 	int ret;
 	struct drm_dp_mst_port *port = drm_dp_mst_topology_get_port_validated(mgr, payload->port);
@@ -3276,17 +3276,20 @@ static int drm_dp_create_payload_step2(struct drm_dp_mst_topology_mgr *mgr,
 	return ret;
 }
 
-static int drm_dp_destroy_payload_step1(struct drm_dp_mst_topology_mgr *mgr,
-					struct drm_dp_mst_topology_state *mst_state,
-					struct drm_dp_mst_atomic_payload *payload)
+static void drm_dp_destroy_payload_at_remote_and_dfp(struct drm_dp_mst_topology_mgr *mgr,
+						     struct drm_dp_mst_topology_state *mst_state,
+						     struct drm_dp_mst_atomic_payload *payload)
 {
 	drm_dbg_kms(mgr->dev, "\n");
 
 	/* it's okay for these to fail */
-	drm_dp_payload_send_msg(mgr, payload->port, payload->vcpi, 0);
-	drm_dp_dpcd_write_payload(mgr, payload->vcpi, payload->vc_start_slot, 0);
+	if (payload->payload_allocation_status == DRM_DP_MST_PAYLOAD_ALLOCATION_REMOTE) {
+		drm_dp_payload_send_msg(mgr, payload->port, payload->vcpi, 0);
+		payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_DFP;
+	}
 
-	return 0;
+	if (payload->payload_allocation_status == DRM_DP_MST_PAYLOAD_ALLOCATION_DFP)
+		drm_dp_dpcd_write_payload(mgr, payload->vcpi, payload->vc_start_slot, 0);
 }
 
 /**
@@ -3296,81 +3299,105 @@ static int drm_dp_destroy_payload_step1(struct drm_dp_mst_topology_mgr *mgr,
  * @payload: The payload to write
  *
  * Determines the starting time slot for the given payload, and programs the VCPI for this payload
- * into hardware. After calling this, the driver should generate ACT and payload packets.
+ * into the DPCD of DPRX. After calling this, the driver should generate ACT and payload packets.
  *
- * Returns: 0 on success, error code on failure. In the event that this fails,
- * @payload.vc_start_slot will also be set to -1.
+ * Returns: 0 on success, error code on failure.
  */
 int drm_dp_add_payload_part1(struct drm_dp_mst_topology_mgr *mgr,
 			     struct drm_dp_mst_topology_state *mst_state,
 			     struct drm_dp_mst_atomic_payload *payload)
 {
 	struct drm_dp_mst_port *port;
-	int ret;
+	int ret = 0;
+	bool allocate = true;
+
+	/* Update mst mgr info */
+	if (mgr->payload_count == 0)
+		mgr->next_start_slot = mst_state->start_slot;
+
+	payload->vc_start_slot = mgr->next_start_slot;
+
+	mgr->payload_count++;
+	mgr->next_start_slot += payload->time_slots;
 
+	/* Allocate payload to immediate downstream facing port */
 	port = drm_dp_mst_topology_get_port_validated(mgr, payload->port);
 	if (!port) {
 		drm_dbg_kms(mgr->dev,
-			    "VCPI %d for port %p not in topology, not creating a payload\n",
+			    "VCPI %d for port %p not in topology, not creating a payload to remote\n",
 			    payload->vcpi, payload->port);
-		payload->vc_start_slot = -1;
-		return 0;
+		allocate = false;
 	}
 
-	if (mgr->payload_count == 0)
-		mgr->next_start_slot = mst_state->start_slot;
-
-	payload->vc_start_slot = mgr->next_start_slot;
+	if (allocate) {
+		ret = drm_dp_create_payload_at_dfp(mgr, payload);
+		if (ret < 0)
+			drm_warn(mgr->dev, "Failed to create MST payload for port %p: %d\n",
+				 payload->port, ret);
 
-	ret = drm_dp_create_payload_step1(mgr, payload);
-	drm_dp_mst_topology_put_port(port);
-	if (ret < 0) {
-		drm_warn(mgr->dev, "Failed to create MST payload for port %p: %d\n",
-			 payload->port, ret);
-		payload->vc_start_slot = -1;
-		return ret;
 	}
 
-	mgr->payload_count++;
-	mgr->next_start_slot += payload->time_slots;
+	payload->payload_allocation_status =
+		(!allocate || ret < 0) ? DRM_DP_MST_PAYLOAD_ALLOCATION_LOCAL :
+								DRM_DP_MST_PAYLOAD_ALLOCATION_DFP;
 
-	return 0;
+	drm_dp_mst_topology_put_port(port);
+
+	return ret;
 }
 EXPORT_SYMBOL(drm_dp_add_payload_part1);
 
 /**
- * drm_dp_remove_payload() - Remove an MST payload
+ * drm_dp_remove_payload_part1() - Remove an MST payload along the virtual channel
  * @mgr: Manager to use.
  * @mst_state: The MST atomic state
- * @old_payload: The payload with its old state
- * @new_payload: The payload to write
+ * @payload: The payload to remove
  *
- * Removes a payload from an MST topology if it was successfully assigned a start slot. Also updates
- * the starting time slots of all other payloads which would have been shifted towards the start of
- * the VC table as a result. After calling this, the driver should generate ACT and payload packets.
+ * Removes a payload along the virtual channel if it was successfully allocated.
+ * After calling this, the driver should set HW to generate ACT and then switch to new
+ * payload allocation state.
  */
-void drm_dp_remove_payload(struct drm_dp_mst_topology_mgr *mgr,
-			   struct drm_dp_mst_topology_state *mst_state,
-			   const struct drm_dp_mst_atomic_payload *old_payload,
-			   struct drm_dp_mst_atomic_payload *new_payload)
+void drm_dp_remove_payload_part1(struct drm_dp_mst_topology_mgr *mgr,
+				 struct drm_dp_mst_topology_state *mst_state,
+				 struct drm_dp_mst_atomic_payload *payload)
 {
-	struct drm_dp_mst_atomic_payload *pos;
+	/* Remove remote payload allocation */
 	bool send_remove = false;
 
-	/* We failed to make the payload, so nothing to do */
-	if (new_payload->vc_start_slot == -1)
-		return;
-
 	mutex_lock(&mgr->lock);
-	send_remove = drm_dp_mst_port_downstream_of_branch(new_payload->port, mgr->mst_primary);
+	send_remove = drm_dp_mst_port_downstream_of_branch(payload->port, mgr->mst_primary);
 	mutex_unlock(&mgr->lock);
 
 	if (send_remove)
-		drm_dp_destroy_payload_step1(mgr, mst_state, new_payload);
+		drm_dp_destroy_payload_at_remote_and_dfp(mgr, mst_state, payload);
 	else
 		drm_dbg_kms(mgr->dev, "Payload for VCPI %d not in topology, not sending remove\n",
-			    new_payload->vcpi);
+			    payload->vcpi);
+
+	payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_LOCAL;
+}
+EXPORT_SYMBOL(drm_dp_remove_payload_part1);
 
+/**
+ * drm_dp_remove_payload_part2() - Remove an MST payload locally
+ * @mgr: Manager to use.
+ * @mst_state: The MST atomic state
+ * @old_payload: The payload with its old state
+ * @new_payload: The payload with its latest state
+ *
+ * Updates the starting time slots of all other payloads which would have been shifted towards
+ * the start of the payload ID table as a result of removing a payload. Driver should call this
+ * function whenever it removes a payload in its HW. It's independent to the result of payload
+ * allocation/deallocation at branch devices along the virtual channel.
+ */
+void drm_dp_remove_payload_part2(struct drm_dp_mst_topology_mgr *mgr,
+				 struct drm_dp_mst_topology_state *mst_state,
+				 const struct drm_dp_mst_atomic_payload *old_payload,
+				 struct drm_dp_mst_atomic_payload *new_payload)
+{
+	struct drm_dp_mst_atomic_payload *pos;
+
+	/* Remove local payload allocation */
 	list_for_each_entry(pos, &mst_state->payloads, next) {
 		if (pos != new_payload && pos->vc_start_slot > new_payload->vc_start_slot)
 			pos->vc_start_slot -= old_payload->time_slots;
@@ -3382,9 +3409,10 @@ void drm_dp_remove_payload(struct drm_dp_mst_topology_mgr *mgr,
 
 	if (new_payload->delete)
 		drm_dp_mst_put_port_malloc(new_payload->port);
-}
-EXPORT_SYMBOL(drm_dp_remove_payload);
 
+	new_payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_NONE;
+}
+EXPORT_SYMBOL(drm_dp_remove_payload_part2);
 /**
  * drm_dp_add_payload_part2() - Execute payload update part 2
  * @mgr: Manager to use.
@@ -3403,17 +3431,19 @@ int drm_dp_add_payload_part2(struct drm_dp_mst_topology_mgr *mgr,
 	int ret = 0;
 
 	/* Skip failed payloads */
-	if (payload->vc_start_slot == -1) {
-		drm_dbg_kms(mgr->dev, "Part 1 of payload creation for %s failed, skipping part 2\n",
+	if (payload->payload_allocation_status != DRM_DP_MST_PAYLOAD_ALLOCATION_DFP) {
+		drm_dbg_kms(state->dev, "Part 1 of payload creation for %s failed, skipping part 2\n",
 			    payload->port->connector->name);
 		return -EIO;
 	}
 
-	ret = drm_dp_create_payload_step2(mgr, payload);
-	if (ret < 0) {
+	/* Allocate payload to remote end */
+	ret = drm_dp_create_payload_to_remote(mgr, payload);
+	if (ret < 0)
 		drm_err(mgr->dev, "Step 2 of creating MST payload for %p failed: %d\n",
 			payload->port, ret);
-	}
+	else
+		payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_REMOTE;
 
 	return ret;
 }
@@ -4324,6 +4354,7 @@ int drm_dp_atomic_find_time_slots(struct drm_atomic_state *state,
 		drm_dp_mst_get_port_malloc(port);
 		payload->port = port;
 		payload->vc_start_slot = -1;
+		payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_NONE;
 		list_add(&payload->next, &topology_state->payloads);
 	}
 	payload->time_slots = req_slots;
@@ -4493,7 +4524,7 @@ void drm_dp_mst_atomic_wait_for_dependencies(struct drm_atomic_state *state)
 		}
 
 		/* Now that previous state is committed, it's safe to copy over the start slot
-		 * assignments
+		 * and allocation status assignments
 		 */
 		list_for_each_entry(old_payload, &old_mst_state->payloads, next) {
 			if (old_payload->delete)
@@ -4502,6 +4533,8 @@ void drm_dp_mst_atomic_wait_for_dependencies(struct drm_atomic_state *state)
 			new_payload = drm_atomic_get_mst_payload_state(new_mst_state,
 								       old_payload->port);
 			new_payload->vc_start_slot = old_payload->vc_start_slot;
+			new_payload->payload_allocation_status =
+							old_payload->payload_allocation_status;
 		}
 	}
 }
@@ -4818,6 +4851,13 @@ void drm_dp_mst_dump_topology(struct seq_file *m,
 	struct drm_dp_mst_atomic_payload *payload;
 	int i, ret;
 
+	static const char *const status[] = {
+		"None",
+		"Local",
+		"DFP",
+		"Remote",
+	};
+
 	mutex_lock(&mgr->lock);
 	if (mgr->mst_primary)
 		drm_dp_mst_dump_mstb(m, mgr->mst_primary);
@@ -4834,7 +4874,7 @@ void drm_dp_mst_dump_topology(struct seq_file *m,
 	seq_printf(m, "payload_mask: %x, max_payloads: %d, start_slot: %u, pbn_div: %d\n",
 		   state->payload_mask, mgr->max_payloads, state->start_slot, state->pbn_div);
 
-	seq_printf(m, "\n| idx | port | vcpi | slots | pbn | dsc |     sink name     |\n");
+	seq_printf(m, "\n| idx | port | vcpi | slots | pbn | dsc | status |     sink name     |\n");
 	for (i = 0; i < mgr->max_payloads; i++) {
 		list_for_each_entry(payload, &state->payloads, next) {
 			char name[14];
@@ -4843,7 +4883,7 @@ void drm_dp_mst_dump_topology(struct seq_file *m,
 				continue;
 
 			fetch_monitor_name(mgr, payload->port, name, sizeof(name));
-			seq_printf(m, " %5d %6d %6d %02d - %02d %5d %5s %19s\n",
+			seq_printf(m, " %5d %6d %6d %02d - %02d %5d %5s %8s %19s\n",
 				   i,
 				   payload->port->port_num,
 				   payload->vcpi,
@@ -4851,6 +4891,7 @@ void drm_dp_mst_dump_topology(struct seq_file *m,
 				   payload->vc_start_slot + payload->time_slots - 1,
 				   payload->pbn,
 				   payload->dsc_enabled ? "Y" : "N",
+				   status[payload->payload_allocation_status],
 				   (*name != 0) ? name : "Unknown");
 		}
 	}