summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_bridge.c
diff options
context:
space:
mode:
authorBoris Brezillon <boris.brezillon@collabora.com>2020-01-06 17:34:09 +0300
committerNeil Armstrong <narmstrong@baylibre.com>2020-01-07 12:11:34 +0300
commite351e4d5eaec713b2d4780c79f68702e88f2a212 (patch)
tree1c6a692b35585c3161a3dc5f3ffb1bf89d4b30c3 /drivers/gpu/drm/drm_bridge.c
parentb86d895524ab7281da8ca788e3666ab622fc8620 (diff)
downloadlinux-e351e4d5eaec713b2d4780c79f68702e88f2a212.tar.xz
drm/bridge: Add the necessary bits to support bus format negotiation
drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-5-narmstrong@baylibre.com
Diffstat (limited to 'drivers/gpu/drm/drm_bridge.c')
-rw-r--r--drivers/gpu/drm/drm_bridge.c267
1 files changed, 266 insertions, 1 deletions
diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
index 8e4b799150b0..37400607e9b7 100644
--- a/drivers/gpu/drm/drm_bridge.c
+++ b/drivers/gpu/drm/drm_bridge.c
@@ -672,12 +672,260 @@ static int drm_atomic_bridge_check(struct drm_bridge *bridge,
}
/**
+ * drm_atomic_helper_bridge_propagate_bus_fmt() - Propagate output format to
+ * the input end of a bridge
+ * @bridge: bridge control structure
+ * @bridge_state: new bridge state
+ * @crtc_state: new CRTC state
+ * @conn_state: new connector state
+ * @output_fmt: tested output bus format
+ * @num_input_fmts: will contain the size of the returned array
+ *
+ * This helper is a pluggable implementation of the
+ * &drm_bridge_funcs.atomic_get_input_bus_fmts operation for bridges that don't
+ * modify the bus configuration between their input and their output. It
+ * returns an array of input formats with a single element set to @output_fmt.
+ *
+ * RETURNS:
+ * a valid format array of size @num_input_fmts, or NULL if the allocation
+ * failed
+ */
+u32 *
+drm_atomic_helper_bridge_propagate_bus_fmt(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts;
+
+ input_fmts = kzalloc(sizeof(*input_fmts), GFP_KERNEL);
+ if (!input_fmts) {
+ *num_input_fmts = 0;
+ return NULL;
+ }
+
+ *num_input_fmts = 1;
+ input_fmts[0] = output_fmt;
+ return input_fmts;
+}
+EXPORT_SYMBOL(drm_atomic_helper_bridge_propagate_bus_fmt);
+
+static int select_bus_fmt_recursive(struct drm_bridge *first_bridge,
+ struct drm_bridge *cur_bridge,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 out_bus_fmt)
+{
+ struct drm_bridge_state *cur_state;
+ unsigned int num_in_bus_fmts, i;
+ struct drm_bridge *prev_bridge;
+ u32 *in_bus_fmts;
+ int ret;
+
+ prev_bridge = drm_bridge_get_prev_bridge(cur_bridge);
+ cur_state = drm_atomic_get_new_bridge_state(crtc_state->state,
+ cur_bridge);
+ if (WARN_ON(!cur_state))
+ return -EINVAL;
+
+ /*
+ * If bus format negotiation is not supported by this bridge, let's
+ * pass MEDIA_BUS_FMT_FIXED to the previous bridge in the chain and
+ * hope that it can handle this situation gracefully (by providing
+ * appropriate default values).
+ */
+ if (!cur_bridge->funcs->atomic_get_input_bus_fmts) {
+ if (cur_bridge != first_bridge) {
+ ret = select_bus_fmt_recursive(first_bridge,
+ prev_bridge, crtc_state,
+ conn_state,
+ MEDIA_BUS_FMT_FIXED);
+ if (ret)
+ return ret;
+ }
+
+ cur_state->input_bus_cfg.format = MEDIA_BUS_FMT_FIXED;
+ cur_state->output_bus_cfg.format = out_bus_fmt;
+ return 0;
+ }
+
+ in_bus_fmts = cur_bridge->funcs->atomic_get_input_bus_fmts(cur_bridge,
+ cur_state,
+ crtc_state,
+ conn_state,
+ out_bus_fmt,
+ &num_in_bus_fmts);
+ if (!num_in_bus_fmts)
+ return -ENOTSUPP;
+ else if (!in_bus_fmts)
+ return -ENOMEM;
+
+ if (first_bridge == cur_bridge) {
+ cur_state->input_bus_cfg.format = in_bus_fmts[0];
+ cur_state->output_bus_cfg.format = out_bus_fmt;
+ kfree(in_bus_fmts);
+ return 0;
+ }
+
+ for (i = 0; i < num_in_bus_fmts; i++) {
+ ret = select_bus_fmt_recursive(first_bridge, prev_bridge,
+ crtc_state, conn_state,
+ in_bus_fmts[i]);
+ if (ret != -ENOTSUPP)
+ break;
+ }
+
+ if (!ret) {
+ cur_state->input_bus_cfg.format = in_bus_fmts[i];
+ cur_state->output_bus_cfg.format = out_bus_fmt;
+ }
+
+ kfree(in_bus_fmts);
+ return ret;
+}
+
+/*
+ * This function is called by &drm_atomic_bridge_chain_check() just before
+ * calling &drm_bridge_funcs.atomic_check() on all elements of the chain.
+ * It performs bus format negotiation between bridge elements. The negotiation
+ * happens in reverse order, starting from the last element in the chain up to
+ * @bridge.
+ *
+ * Negotiation starts by retrieving supported output bus formats on the last
+ * bridge element and testing them one by one. The test is recursive, meaning
+ * that for each tested output format, the whole chain will be walked backward,
+ * and each element will have to choose an input bus format that can be
+ * transcoded to the requested output format. When a bridge element does not
+ * support transcoding into a specific output format -ENOTSUPP is returned and
+ * the next bridge element will have to try a different format. If none of the
+ * combinations worked, -ENOTSUPP is returned and the atomic modeset will fail.
+ *
+ * This implementation is relying on
+ * &drm_bridge_funcs.atomic_get_output_bus_fmts() and
+ * &drm_bridge_funcs.atomic_get_input_bus_fmts() to gather supported
+ * input/output formats.
+ *
+ * When &drm_bridge_funcs.atomic_get_output_bus_fmts() is not implemented by
+ * the last element of the chain, &drm_atomic_bridge_chain_select_bus_fmts()
+ * tries a single format: &drm_connector.display_info.bus_formats[0] if
+ * available, MEDIA_BUS_FMT_FIXED otherwise.
+ *
+ * When &drm_bridge_funcs.atomic_get_input_bus_fmts() is not implemented,
+ * &drm_atomic_bridge_chain_select_bus_fmts() skips the negotiation on the
+ * bridge element that lacks this hook and asks the previous element in the
+ * chain to try MEDIA_BUS_FMT_FIXED. It's up to bridge drivers to decide what
+ * to do in that case (fail if they want to enforce bus format negotiation, or
+ * provide a reasonable default if they need to support pipelines where not
+ * all elements support bus format negotiation).
+ */
+static int
+drm_atomic_bridge_chain_select_bus_fmts(struct drm_bridge *bridge,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct drm_connector *conn = conn_state->connector;
+ struct drm_encoder *encoder = bridge->encoder;
+ struct drm_bridge_state *last_bridge_state;
+ unsigned int i, num_out_bus_fmts;
+ struct drm_bridge *last_bridge;
+ u32 *out_bus_fmts;
+ int ret = 0;
+
+ last_bridge = list_last_entry(&encoder->bridge_chain,
+ struct drm_bridge, chain_node);
+ last_bridge_state = drm_atomic_get_new_bridge_state(crtc_state->state,
+ last_bridge);
+ if (WARN_ON(!last_bridge_state))
+ return -EINVAL;
+
+ if (last_bridge->funcs->atomic_get_output_bus_fmts) {
+ const struct drm_bridge_funcs *funcs = last_bridge->funcs;
+
+ out_bus_fmts = funcs->atomic_get_output_bus_fmts(last_bridge,
+ last_bridge_state,
+ crtc_state,
+ conn_state,
+ &num_out_bus_fmts);
+ if (!num_out_bus_fmts)
+ return -ENOTSUPP;
+ else if (!out_bus_fmts)
+ return -ENOMEM;
+ } else {
+ num_out_bus_fmts = 1;
+ out_bus_fmts = kmalloc(sizeof(*out_bus_fmts), GFP_KERNEL);
+ if (!out_bus_fmts)
+ return -ENOMEM;
+
+ if (conn->display_info.num_bus_formats &&
+ conn->display_info.bus_formats)
+ out_bus_fmts[0] = conn->display_info.bus_formats[0];
+ else
+ out_bus_fmts[0] = MEDIA_BUS_FMT_FIXED;
+ }
+
+ for (i = 0; i < num_out_bus_fmts; i++) {
+ ret = select_bus_fmt_recursive(bridge, last_bridge, crtc_state,
+ conn_state, out_bus_fmts[i]);
+ if (ret != -ENOTSUPP)
+ break;
+ }
+
+ kfree(out_bus_fmts);
+
+ return ret;
+}
+
+static void
+drm_atomic_bridge_propagate_bus_flags(struct drm_bridge *bridge,
+ struct drm_connector *conn,
+ struct drm_atomic_state *state)
+{
+ struct drm_bridge_state *bridge_state, *next_bridge_state;
+ struct drm_bridge *next_bridge;
+ u32 output_flags;
+
+ bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
+ next_bridge = drm_bridge_get_next_bridge(bridge);
+
+ /*
+ * Let's try to apply the most common case here, that is, propagate
+ * display_info flags for the last bridge, and propagate the input
+ * flags of the next bridge element to the output end of the current
+ * bridge when the bridge is not the last one.
+ * There are exceptions to this rule, like when signal inversion is
+ * happening at the board level, but that's something drivers can deal
+ * with from their &drm_bridge_funcs.atomic_check() implementation by
+ * simply overriding the flags value we've set here.
+ */
+ if (!next_bridge) {
+ output_flags = conn->display_info.bus_flags;
+ } else {
+ next_bridge_state = drm_atomic_get_new_bridge_state(state,
+ next_bridge);
+ output_flags = next_bridge_state->input_bus_cfg.flags;
+ }
+
+ bridge_state->output_bus_cfg.flags = output_flags;
+
+ /*
+ * Propage the output flags to the input end of the bridge. Again, it's
+ * not necessarily what all bridges want, but that's what most of them
+ * do, and by doing that by default we avoid forcing drivers to
+ * duplicate the "dummy propagation" logic.
+ */
+ bridge_state->input_bus_cfg.flags = output_flags;
+}
+
+/**
* drm_atomic_bridge_chain_check() - Do an atomic check on the bridge chain
* @bridge: bridge control structure
* @crtc_state: new CRTC state
* @conn_state: new connector state
*
- * Calls &drm_bridge_funcs.atomic_check() (falls back on
+ * First trigger a bus format negotiation before calling
+ * &drm_bridge_funcs.atomic_check() (falls back on
* &drm_bridge_funcs.mode_fixup()) op for all the bridges in the encoder chain,
* starting from the last bridge to the first. These are called before calling
* &drm_encoder_helper_funcs.atomic_check()
@@ -689,12 +937,29 @@ int drm_atomic_bridge_chain_check(struct drm_bridge *bridge,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
+ struct drm_connector *conn = conn_state->connector;
struct drm_encoder *encoder = bridge->encoder;
struct drm_bridge *iter;
+ int ret;
+
+ ret = drm_atomic_bridge_chain_select_bus_fmts(bridge, crtc_state,
+ conn_state);
+ if (ret)
+ return ret;
list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) {
int ret;
+ /*
+ * Bus flags are propagated by default. If a bridge needs to
+ * tweak the input bus flags for any reason, it should happen
+ * in its &drm_bridge_funcs.atomic_check() implementation such
+ * that preceding bridges in the chain can propagate the new
+ * bus flags.
+ */
+ drm_atomic_bridge_propagate_bus_flags(iter, conn,
+ crtc_state->state);
+
ret = drm_atomic_bridge_check(iter, crtc_state, conn_state);
if (ret)
return ret;