diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-09-21 19:10:09 +0400 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-09-21 19:10:09 +0400 |
commit | 44040f107e64d689ccd3211ac62c6bc44f3f0775 (patch) | |
tree | f85059028aa570e758c7fb272fd8cf823ab4f119 /drivers/gpu/drm/drm_modes.c | |
parent | 388dba30471c236a290c4082bce5f2b5cd1a7a06 (diff) | |
parent | 28d520433b6375740990ab99d69b0d0067fd656b (diff) | |
download | linux-44040f107e64d689ccd3211ac62c6bc44f3f0775.tar.xz |
Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits)
drm/vgaarb: add VGA arbitration support to the drm and kms.
drm/radeon: some r420s have a CP race with the DMA engine.
drm/radeon/r600/kms: rv670 is not DCE3
drm/radeon/kms: r420 idle after programming GA_ENHANCE
drm/radeon/kms: more fixes to rv770 suspend/resume path.
drm/radeon/kms: more alignment for rv770.c with r600.c
drm/radeon/kms: rv770 blit init called too late.
drm/radeon/kms: move around new init path code to avoid posting at init
drm/radeon/r600: fix some issues with suspend/resume.
drm/radeon/kms: disable VGA rendering engine before taking over VRAM
drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().
drm/radeon/kms: add initial connector properties
drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
drm/radeon/kms: don't fail if we fail to init GPU acceleration
drm/r600/kms: fixup number of loops per blit calculation.
drm/radeon/kms: reprogram format in set base.
drm/radeon: avivo chips have no separate int bit for display
drm/radeon/r600: don't do interrupts
drm: fix _DRM_GEM addmap error message
drm: update crtc x/y when only fb changes
...
Fixed up trivial conflicts in firmware/Makefile due to network driver
(cxgb3) and drm (mga/r128/radeon) firmware being listed next to each
other.
Diffstat (limited to 'drivers/gpu/drm/drm_modes.c')
-rw-r--r-- | drivers/gpu/drm/drm_modes.c | 435 |
1 files changed, 425 insertions, 10 deletions
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 7914097b09c6..49404ce1666e 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -8,6 +8,8 @@ * Copyright © 2007 Dave Airlie * Copyright © 2007-2008 Intel Corporation * Jesse Barnes <jesse.barnes@intel.com> + * Copyright 2005-2006 Luc Verhaegen + * Copyright (c) 2001, Andy Ritger aritger@nvidia.com * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), @@ -38,7 +40,6 @@ #include "drm.h" #include "drm_crtc.h" -#define DRM_MODESET_DEBUG "drm_mode" /** * drm_mode_debug_printmodeline - debug print a mode * @dev: DRM device @@ -51,8 +52,8 @@ */ void drm_mode_debug_printmodeline(struct drm_display_mode *mode) { - DRM_DEBUG_MODE(DRM_MODESET_DEBUG, - "Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n", + DRM_DEBUG_KMS("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d " + "0x%x 0x%x\n", mode->base.id, mode->name, mode->vrefresh, mode->clock, mode->hdisplay, mode->hsync_start, mode->hsync_end, mode->htotal, @@ -62,6 +63,420 @@ void drm_mode_debug_printmodeline(struct drm_display_mode *mode) EXPORT_SYMBOL(drm_mode_debug_printmodeline); /** + * drm_cvt_mode -create a modeline based on CVT algorithm + * @dev: DRM device + * @hdisplay: hdisplay size + * @vdisplay: vdisplay size + * @vrefresh : vrefresh rate + * @reduced : Whether the GTF calculation is simplified + * @interlaced:Whether the interlace is supported + * + * LOCKING: + * none. + * + * return the modeline based on CVT algorithm + * + * This function is called to generate the modeline based on CVT algorithm + * according to the hdisplay, vdisplay, vrefresh. + * It is based from the VESA(TM) Coordinated Video Timing Generator by + * Graham Loveridge April 9, 2003 available at + * http://www.vesa.org/public/CVT/CVTd6r1.xls + * + * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. + * What I have done is to translate it by using integer calculation. + */ +#define HV_FACTOR 1000 +struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, + int vdisplay, int vrefresh, + bool reduced, bool interlaced) +{ + /* 1) top/bottom margin size (% of height) - default: 1.8, */ +#define CVT_MARGIN_PERCENTAGE 18 + /* 2) character cell horizontal granularity (pixels) - default 8 */ +#define CVT_H_GRANULARITY 8 + /* 3) Minimum vertical porch (lines) - default 3 */ +#define CVT_MIN_V_PORCH 3 + /* 4) Minimum number of vertical back porch lines - default 6 */ +#define CVT_MIN_V_BPORCH 6 + /* Pixel Clock step (kHz) */ +#define CVT_CLOCK_STEP 250 + struct drm_display_mode *drm_mode; + bool margins = false; + unsigned int vfieldrate, hperiod; + int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync; + int interlace; + + /* allocate the drm_display_mode structure. If failure, we will + * return directly + */ + drm_mode = drm_mode_create(dev); + if (!drm_mode) + return NULL; + + /* the CVT default refresh rate is 60Hz */ + if (!vrefresh) + vrefresh = 60; + + /* the required field fresh rate */ + if (interlaced) + vfieldrate = vrefresh * 2; + else + vfieldrate = vrefresh; + + /* horizontal pixels */ + hdisplay_rnd = hdisplay - (hdisplay % CVT_H_GRANULARITY); + + /* determine the left&right borders */ + hmargin = 0; + if (margins) { + hmargin = hdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000; + hmargin -= hmargin % CVT_H_GRANULARITY; + } + /* find the total active pixels */ + drm_mode->hdisplay = hdisplay_rnd + 2 * hmargin; + + /* find the number of lines per field */ + if (interlaced) + vdisplay_rnd = vdisplay / 2; + else + vdisplay_rnd = vdisplay; + + /* find the top & bottom borders */ + vmargin = 0; + if (margins) + vmargin = vdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000; + + drm_mode->vdisplay = vdisplay + 2 * vmargin; + + /* Interlaced */ + if (interlaced) + interlace = 1; + else + interlace = 0; + + /* Determine VSync Width from aspect ratio */ + if (!(vdisplay % 3) && ((vdisplay * 4 / 3) == hdisplay)) + vsync = 4; + else if (!(vdisplay % 9) && ((vdisplay * 16 / 9) == hdisplay)) + vsync = 5; + else if (!(vdisplay % 10) && ((vdisplay * 16 / 10) == hdisplay)) + vsync = 6; + else if (!(vdisplay % 4) && ((vdisplay * 5 / 4) == hdisplay)) + vsync = 7; + else if (!(vdisplay % 9) && ((vdisplay * 15 / 9) == hdisplay)) + vsync = 7; + else /* custom */ + vsync = 10; + + if (!reduced) { + /* simplify the GTF calculation */ + /* 4) Minimum time of vertical sync + back porch interval (µs) + * default 550.0 + */ + int tmp1, tmp2; +#define CVT_MIN_VSYNC_BP 550 + /* 3) Nominal HSync width (% of line period) - default 8 */ +#define CVT_HSYNC_PERCENTAGE 8 + unsigned int hblank_percentage; + int vsyncandback_porch, vback_porch, hblank; + + /* estimated the horizontal period */ + tmp1 = HV_FACTOR * 1000000 - + CVT_MIN_VSYNC_BP * HV_FACTOR * vfieldrate; + tmp2 = (vdisplay_rnd + 2 * vmargin + CVT_MIN_V_PORCH) * 2 + + interlace; + hperiod = tmp1 * 2 / (tmp2 * vfieldrate); + + tmp1 = CVT_MIN_VSYNC_BP * HV_FACTOR / hperiod + 1; + /* 9. Find number of lines in sync + backporch */ + if (tmp1 < (vsync + CVT_MIN_V_PORCH)) + vsyncandback_porch = vsync + CVT_MIN_V_PORCH; + else + vsyncandback_porch = tmp1; + /* 10. Find number of lines in back porch */ + vback_porch = vsyncandback_porch - vsync; + drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + + vsyncandback_porch + CVT_MIN_V_PORCH; + /* 5) Definition of Horizontal blanking time limitation */ + /* Gradient (%/kHz) - default 600 */ +#define CVT_M_FACTOR 600 + /* Offset (%) - default 40 */ +#define CVT_C_FACTOR 40 + /* Blanking time scaling factor - default 128 */ +#define CVT_K_FACTOR 128 + /* Scaling factor weighting - default 20 */ +#define CVT_J_FACTOR 20 +#define CVT_M_PRIME (CVT_M_FACTOR * CVT_K_FACTOR / 256) +#define CVT_C_PRIME ((CVT_C_FACTOR - CVT_J_FACTOR) * CVT_K_FACTOR / 256 + \ + CVT_J_FACTOR) + /* 12. Find ideal blanking duty cycle from formula */ + hblank_percentage = CVT_C_PRIME * HV_FACTOR - CVT_M_PRIME * + hperiod / 1000; + /* 13. Blanking time */ + if (hblank_percentage < 20 * HV_FACTOR) + hblank_percentage = 20 * HV_FACTOR; + hblank = drm_mode->hdisplay * hblank_percentage / + (100 * HV_FACTOR - hblank_percentage); + hblank -= hblank % (2 * CVT_H_GRANULARITY); + /* 14. find the total pixes per line */ + drm_mode->htotal = drm_mode->hdisplay + hblank; + drm_mode->hsync_end = drm_mode->hdisplay + hblank / 2; + drm_mode->hsync_start = drm_mode->hsync_end - + (drm_mode->htotal * CVT_HSYNC_PERCENTAGE) / 100; + drm_mode->hsync_start += CVT_H_GRANULARITY - + drm_mode->hsync_start % CVT_H_GRANULARITY; + /* fill the Vsync values */ + drm_mode->vsync_start = drm_mode->vdisplay + CVT_MIN_V_PORCH; + drm_mode->vsync_end = drm_mode->vsync_start + vsync; + } else { + /* Reduced blanking */ + /* Minimum vertical blanking interval time (µs)- default 460 */ +#define CVT_RB_MIN_VBLANK 460 + /* Fixed number of clocks for horizontal sync */ +#define CVT_RB_H_SYNC 32 + /* Fixed number of clocks for horizontal blanking */ +#define CVT_RB_H_BLANK 160 + /* Fixed number of lines for vertical front porch - default 3*/ +#define CVT_RB_VFPORCH 3 + int vbilines; + int tmp1, tmp2; + /* 8. Estimate Horizontal period. */ + tmp1 = HV_FACTOR * 1000000 - + CVT_RB_MIN_VBLANK * HV_FACTOR * vfieldrate; + tmp2 = vdisplay_rnd + 2 * vmargin; + hperiod = tmp1 / (tmp2 * vfieldrate); + /* 9. Find number of lines in vertical blanking */ + vbilines = CVT_RB_MIN_VBLANK * HV_FACTOR / hperiod + 1; + /* 10. Check if vertical blanking is sufficient */ + if (vbilines < (CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH)) + vbilines = CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH; + /* 11. Find total number of lines in vertical field */ + drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + vbilines; + /* 12. Find total number of pixels in a line */ + drm_mode->htotal = drm_mode->hdisplay + CVT_RB_H_BLANK; + /* Fill in HSync values */ + drm_mode->hsync_end = drm_mode->hdisplay + CVT_RB_H_BLANK / 2; + drm_mode->hsync_start = drm_mode->hsync_end = CVT_RB_H_SYNC; + } + /* 15/13. Find pixel clock frequency (kHz for xf86) */ + drm_mode->clock = drm_mode->htotal * HV_FACTOR * 1000 / hperiod; + drm_mode->clock -= drm_mode->clock % CVT_CLOCK_STEP; + /* 18/16. Find actual vertical frame frequency */ + /* ignore - just set the mode flag for interlaced */ + if (interlaced) + drm_mode->vtotal *= 2; + /* Fill the mode line name */ + drm_mode_set_name(drm_mode); + if (reduced) + drm_mode->flags |= (DRM_MODE_FLAG_PHSYNC | + DRM_MODE_FLAG_NVSYNC); + else + drm_mode->flags |= (DRM_MODE_FLAG_PVSYNC | + DRM_MODE_FLAG_NHSYNC); + if (interlaced) + drm_mode->flags |= DRM_MODE_FLAG_INTERLACE; + + return drm_mode; +} +EXPORT_SYMBOL(drm_cvt_mode); + +/** + * drm_gtf_mode - create the modeline based on GTF algorithm + * + * @dev :drm device + * @hdisplay :hdisplay size + * @vdisplay :vdisplay size + * @vrefresh :vrefresh rate. + * @interlaced :whether the interlace is supported + * @margins :whether the margin is supported + * + * LOCKING. + * none. + * + * return the modeline based on GTF algorithm + * + * This function is to create the modeline based on the GTF algorithm. + * Generalized Timing Formula is derived from: + * GTF Spreadsheet by Andy Morrish (1/5/97) + * available at http://www.vesa.org + * + * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c. + * What I have done is to translate it by using integer calculation. + * I also refer to the function of fb_get_mode in the file of + * drivers/video/fbmon.c + */ +struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, int hdisplay, + int vdisplay, int vrefresh, + bool interlaced, int margins) +{ + /* 1) top/bottom margin size (% of height) - default: 1.8, */ +#define GTF_MARGIN_PERCENTAGE 18 + /* 2) character cell horizontal granularity (pixels) - default 8 */ +#define GTF_CELL_GRAN 8 + /* 3) Minimum vertical porch (lines) - default 3 */ +#define GTF_MIN_V_PORCH 1 + /* width of vsync in lines */ +#define V_SYNC_RQD 3 + /* width of hsync as % of total line */ +#define H_SYNC_PERCENT 8 + /* min time of vsync + back porch (microsec) */ +#define MIN_VSYNC_PLUS_BP 550 + /* blanking formula gradient */ +#define GTF_M 600 + /* blanking formula offset */ +#define GTF_C 40 + /* blanking formula scaling factor */ +#define GTF_K 128 + /* blanking formula scaling factor */ +#define GTF_J 20 + /* C' and M' are part of the Blanking Duty Cycle computation */ +#define GTF_C_PRIME (((GTF_C - GTF_J) * GTF_K / 256) + GTF_J) +#define GTF_M_PRIME (GTF_K * GTF_M / 256) + struct drm_display_mode *drm_mode; + unsigned int hdisplay_rnd, vdisplay_rnd, vfieldrate_rqd; + int top_margin, bottom_margin; + int interlace; + unsigned int hfreq_est; + int vsync_plus_bp, vback_porch; + unsigned int vtotal_lines, vfieldrate_est, hperiod; + unsigned int vfield_rate, vframe_rate; + int left_margin, right_margin; + unsigned int total_active_pixels, ideal_duty_cycle; + unsigned int hblank, total_pixels, pixel_freq; + int hsync, hfront_porch, vodd_front_porch_lines; + unsigned int tmp1, tmp2; + + drm_mode = drm_mode_create(dev); + if (!drm_mode) + return NULL; + + /* 1. In order to give correct results, the number of horizontal + * pixels requested is first processed to ensure that it is divisible + * by the character size, by rounding it to the nearest character + * cell boundary: + */ + hdisplay_rnd = (hdisplay + GTF_CELL_GRAN / 2) / GTF_CELL_GRAN; + hdisplay_rnd = hdisplay_rnd * GTF_CELL_GRAN; + + /* 2. If interlace is requested, the number of vertical lines assumed + * by the calculation must be halved, as the computation calculates + * the number of vertical lines per field. + */ + if (interlaced) + vdisplay_rnd = vdisplay / 2; + else + vdisplay_rnd = vdisplay; + + /* 3. Find the frame rate required: */ + if (interlaced) + vfieldrate_rqd = vrefresh * 2; + else + vfieldrate_rqd = vrefresh; + + /* 4. Find number of lines in Top margin: */ + top_margin = 0; + if (margins) + top_margin = (vdisplay_rnd * GTF_MARGIN_PERCENTAGE + 500) / + 1000; + /* 5. Find number of lines in bottom margin: */ + bottom_margin = top_margin; + + /* 6. If interlace is required, then set variable interlace: */ + if (interlaced) + interlace = 1; + else + interlace = 0; + + /* 7. Estimate the Horizontal frequency */ + { + tmp1 = (1000000 - MIN_VSYNC_PLUS_BP * vfieldrate_rqd) / 500; + tmp2 = (vdisplay_rnd + 2 * top_margin + GTF_MIN_V_PORCH) * + 2 + interlace; + hfreq_est = (tmp2 * 1000 * vfieldrate_rqd) / tmp1; + } + + /* 8. Find the number of lines in V sync + back porch */ + /* [V SYNC+BP] = RINT(([MIN VSYNC+BP] * hfreq_est / 1000000)) */ + vsync_plus_bp = MIN_VSYNC_PLUS_BP * hfreq_est / 1000; + vsync_plus_bp = (vsync_plus_bp + 500) / 1000; + /* 9. Find the number of lines in V back porch alone: */ + vback_porch = vsync_plus_bp - V_SYNC_RQD; + /* 10. Find the total number of lines in Vertical field period: */ + vtotal_lines = vdisplay_rnd + top_margin + bottom_margin + + vsync_plus_bp + GTF_MIN_V_PORCH; + /* 11. Estimate the Vertical field frequency: */ + vfieldrate_est = hfreq_est / vtotal_lines; + /* 12. Find the actual horizontal period: */ + hperiod = 1000000 / (vfieldrate_rqd * vtotal_lines); + + /* 13. Find the actual Vertical field frequency: */ + vfield_rate = hfreq_est / vtotal_lines; + /* 14. Find the Vertical frame frequency: */ + if (interlaced) + vframe_rate = vfield_rate / 2; + else + vframe_rate = vfield_rate; + /* 15. Find number of pixels in left margin: */ + if (margins) + left_margin = (hdisplay_rnd * GTF_MARGIN_PERCENTAGE + 500) / + 1000; + else + left_margin = 0; + + /* 16.Find number of pixels in right margin: */ + right_margin = left_margin; + /* 17.Find total number of active pixels in image and left and right */ + total_active_pixels = hdisplay_rnd + left_margin + right_margin; + /* 18.Find the ideal blanking duty cycle from blanking duty cycle */ + ideal_duty_cycle = GTF_C_PRIME * 1000 - + (GTF_M_PRIME * 1000000 / hfreq_est); + /* 19.Find the number of pixels in the blanking time to the nearest + * double character cell: */ + hblank = total_active_pixels * ideal_duty_cycle / + (100000 - ideal_duty_cycle); + hblank = (hblank + GTF_CELL_GRAN) / (2 * GTF_CELL_GRAN); + hblank = hblank * 2 * GTF_CELL_GRAN; + /* 20.Find total number of pixels: */ + total_pixels = total_active_pixels + hblank; + /* 21.Find pixel clock frequency: */ + pixel_freq = total_pixels * hfreq_est / 1000; + /* Stage 1 computations are now complete; I should really pass + * the results to another function and do the Stage 2 computations, + * but I only need a few more values so I'll just append the + * computations here for now */ + /* 17. Find the number of pixels in the horizontal sync period: */ + hsync = H_SYNC_PERCENT * total_pixels / 100; + hsync = (hsync + GTF_CELL_GRAN / 2) / GTF_CELL_GRAN; + hsync = hsync * GTF_CELL_GRAN; + /* 18. Find the number of pixels in horizontal front porch period */ + hfront_porch = hblank / 2 - hsync; + /* 36. Find the number of lines in the odd front porch period: */ + vodd_front_porch_lines = GTF_MIN_V_PORCH ; + + /* finally, pack the results in the mode struct */ + drm_mode->hdisplay = hdisplay_rnd; + drm_mode->hsync_start = hdisplay_rnd + hfront_porch; + drm_mode->hsync_end = drm_mode->hsync_start + hsync; + drm_mode->htotal = total_pixels; + drm_mode->vdisplay = vdisplay_rnd; + drm_mode->vsync_start = vdisplay_rnd + vodd_front_porch_lines; + drm_mode->vsync_end = drm_mode->vsync_start + V_SYNC_RQD; + drm_mode->vtotal = vtotal_lines; + + drm_mode->clock = pixel_freq; + + drm_mode_set_name(drm_mode); + drm_mode->flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC; + + if (interlaced) { + drm_mode->vtotal *= 2; + drm_mode->flags |= DRM_MODE_FLAG_INTERLACE; + } + + return drm_mode; +} +EXPORT_SYMBOL(drm_gtf_mode); +/** * drm_mode_set_name - set the name on a mode * @mode: name will be set in this mode * @@ -151,7 +566,9 @@ EXPORT_SYMBOL(drm_mode_height); * FIXME: why is this needed? shouldn't vrefresh be set already? * * RETURNS: - * Vertical refresh rate of @mode x 1000. For precision reasons. + * Vertical refresh rate. It will be the result of actual value plus 0.5. + * If it is 70.288, it will return 70Hz. + * If it is 59.6, it will return 60Hz. */ int drm_mode_vrefresh(struct drm_display_mode *mode) { @@ -161,14 +578,13 @@ int drm_mode_vrefresh(struct drm_display_mode *mode) if (mode->vrefresh > 0) refresh = mode->vrefresh; else if (mode->htotal > 0 && mode->vtotal > 0) { + int vtotal; + vtotal = mode->vtotal; /* work out vrefresh the value will be x1000 */ calc_val = (mode->clock * 1000); - calc_val /= mode->htotal; - calc_val *= 1000; - calc_val /= mode->vtotal; + refresh = (calc_val + vtotal / 2) / vtotal; - refresh = calc_val; if (mode->flags & DRM_MODE_FLAG_INTERLACE) refresh *= 2; if (mode->flags & DRM_MODE_FLAG_DBLSCAN) @@ -403,8 +819,7 @@ void drm_mode_prune_invalid(struct drm_device *dev, list_del(&mode->head); if (verbose) { drm_mode_debug_printmodeline(mode); - DRM_DEBUG_MODE(DRM_MODESET_DEBUG, - "Not using %s mode %d\n", + DRM_DEBUG_KMS("Not using %s mode %d\n", mode->name, mode->status); } drm_mode_destroy(dev, mode); |