diff options
| author | Zhao Yakui <yakui.zhao@intel.com> | 2012-08-08 17:55:55 +0400 |
|---|---|---|
| committer | Dave Airlie <airlied@redhat.com> | 2012-08-24 03:29:25 +0400 |
| commit | d112a8163f83752361dd639a9a579ae5cc05c6cf (patch) | |
| tree | 53a97ff373718223d0b46cb6d74dc81906058439 /drivers/gpu/drm/gma500/cdv_intel_display.c | |
| parent | 35659715c42b5cd148935e8ebd4e5e8e4e256b96 (diff) | |
| download | linux-d112a8163f83752361dd639a9a579ae5cc05c6cf.tar.xz | |
gma500/cdv: Add eDP support
Introduce the eDP support into the driver.
This has been reworked a bit because kernel driver proper uses encoder/connectors
while the legacy Intel driver uses the old output stuff.
It also diverges on the backlight handling. The legacy Intel driver adds a panel
abstraction based upon the i915 one. It's only really used for backlight bits
and we have a perfectly good backlight abstraction which can extend instead.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[ported to upstream driver, redid backlight abstraction]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Diffstat (limited to 'drivers/gpu/drm/gma500/cdv_intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/gma500/cdv_intel_display.c | 42 |
1 files changed, 40 insertions, 2 deletions
diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c index 3f1106096ad3..bfb056561777 100644 --- a/drivers/gpu/drm/gma500/cdv_intel_display.c +++ b/drivers/gpu/drm/gma500/cdv_intel_display.c @@ -438,7 +438,8 @@ static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc, limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96]; else limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100]; - } else if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + } else if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) { if (refclk == 27000) limit = &cdv_intel_limits[CDV_LIMIT_DP_27]; else @@ -1045,6 +1046,7 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_connector *connector; const struct cdv_intel_limit_t *limit; u32 ddi_select = 0; + bool is_edp = false; list_for_each_entry(connector, &mode_config->connector_list, head) { struct psb_intel_encoder *psb_intel_encoder = @@ -1071,6 +1073,9 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc, case INTEL_OUTPUT_DISPLAYPORT: is_dp = true; break; + case INTEL_OUTPUT_EDP: + is_edp = true; + break; default: DRM_ERROR("invalid output type.\n"); return 0; @@ -1083,7 +1088,15 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc, else /* high-end sku, 27/100 mhz */ refclk = 27000; - if (is_dp) { + if (is_dp || is_edp) { + /* + * Based on the spec the low-end SKU has only CRT/LVDS. So it is + * unnecessary to consider it for DP/eDP. + * On the high-end SKU, it will use the 27/100M reference clk + * for DP/eDP. When using SSC clock, the ref clk is 100MHz.Otherwise + * it will be 27MHz. From the VBIOS code it seems that the pipe A choose + * 27MHz for DP/eDP while the Pipe B chooses the 100MHz. + */ if (pipe == 0) refclk = 27000; else @@ -1133,6 +1146,31 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc, /* setup pipeconf */ pipeconf = REG_READ(map->conf); + pipeconf &= ~(PIPE_BPC_MASK); + if (is_edp) { + switch (dev_priv->edp.bpp) { + case 24: + pipeconf |= PIPE_8BPC; + break; + case 18: + pipeconf |= PIPE_6BPC; + break; + case 30: + pipeconf |= PIPE_10BPC; + break; + default: + pipeconf |= PIPE_8BPC; + break; + } + } else if (is_lvds) { + /* the BPC will be 6 if it is 18-bit LVDS panel */ + if ((REG_READ(LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) + pipeconf |= PIPE_8BPC; + else + pipeconf |= PIPE_6BPC; + } else + pipeconf |= PIPE_8BPC; + /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; |