drm/msm/dp: Implement hpd_notify()

The DisplayPort controller's hot-plug mechanism is based on pinmuxing a
physical signal on a GPIO pin into the controller. This is not always
possible, either because there aren't dedicated GPIOs available or
because the hot-plug signal is a virtual notification, in cases such as
USB Type-C.

For these cases, by implementing the hpd_notify() callback for the
DisplayPort controller's drm_bridge, a downstream drm_bridge
(next_bridge) can be used to track and signal the connection status
changes.

This makes it possible to use downstream drm_bridges such as
display-connector or any virtual mechanism, as long as they are
implemented as a drm_bridge.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[bjorn: Drop connector->fwnode assignment and dev from struct msm_dp]
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514410/
Link: https://lore.kernel.org/r/20221207220012.16529-10-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

1 files changed, 22 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 720dc2c812d6..031ebdcd689c 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1792,3 +1792,25 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
 
 	dp_display->internal_hpd = false;
 }
+
+void dp_bridge_hpd_notify(struct drm_bridge *bridge,
+			  enum drm_connector_status status)
+{
+	struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
+	struct msm_dp *dp_display = dp_bridge->dp_display;
+	struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	/* Without next_bridge interrupts are handled by the DP core directly */
+	if (dp_display->internal_hpd)
+		return;
+
+	if (!dp->core_initialized) {
+		drm_dbg_dp(dp->drm_dev, "not initialized\n");
+		return;
+	}
+
+	if (!dp_display->is_connected && status == connector_status_connected)
+		dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
+	else if (dp_display->is_connected && status == connector_status_disconnected)
+		dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
+}