drm/msm: add hdmi support for apq8x74/mdp5

The HDMI block is basically the same between older SoC's with mdp4
display controller, and newer ones with mdp5.

So mostly this consists of better abstracting out the different sets of
regulators, clks, etc.  In particular, for regulators and clks we can
split it up by what is needed for hot plug detect to work, and what is
needed to light up the display.

Also, 8x74 has a new phy.. a very simple one, but split out into a
different mmio space.  And with mdp5, the irq is shared with mdp, so we
don't directly register our own irq handler.

Signed-off-by: Rob Clark <robdclark@gmail.com>

1 files changed, 71 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
index 5a8ee3473cf5..7d10e55403c6 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
@@ -21,6 +21,7 @@ struct hdmi_bridge {
 	struct drm_bridge base;
 
 	struct hdmi *hdmi;
+	bool power_on;
 
 	unsigned long int pixclock;
 };
@@ -34,6 +35,65 @@ static void hdmi_bridge_destroy(struct drm_bridge *bridge)
 	kfree(hdmi_bridge);
 }
 
+static void power_on(struct drm_bridge *bridge)
+{
+	struct drm_device *dev = bridge->dev;
+	struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
+	struct hdmi *hdmi = hdmi_bridge->hdmi;
+	const struct hdmi_platform_config *config = hdmi->config;
+	int i, ret;
+
+	for (i = 0; i < config->pwr_reg_cnt; i++) {
+		ret = regulator_enable(hdmi->pwr_regs[i]);
+		if (ret) {
+			dev_err(dev->dev, "failed to enable pwr regulator: %s (%d)\n",
+					config->pwr_reg_names[i], ret);
+		}
+	}
+
+	if (config->pwr_clk_cnt > 0) {
+		DBG("pixclock: %lu", hdmi_bridge->pixclock);
+		ret = clk_set_rate(hdmi->pwr_clks[0], hdmi_bridge->pixclock);
+		if (ret) {
+			dev_err(dev->dev, "failed to set pixel clk: %s (%d)\n",
+					config->pwr_clk_names[0], ret);
+		}
+	}
+
+	for (i = 0; i < config->pwr_clk_cnt; i++) {
+		ret = clk_prepare_enable(hdmi->pwr_clks[i]);
+		if (ret) {
+			dev_err(dev->dev, "failed to enable pwr clk: %s (%d)\n",
+					config->pwr_clk_names[i], ret);
+		}
+	}
+}
+
+static void power_off(struct drm_bridge *bridge)
+{
+	struct drm_device *dev = bridge->dev;
+	struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
+	struct hdmi *hdmi = hdmi_bridge->hdmi;
+	const struct hdmi_platform_config *config = hdmi->config;
+	int i, ret;
+
+	/* TODO do we need to wait for final vblank somewhere before
+	 * cutting the clocks?
+	 */
+	mdelay(16 + 4);
+
+	for (i = 0; i < config->pwr_clk_cnt; i++)
+		clk_disable_unprepare(hdmi->pwr_clks[i]);
+
+	for (i = 0; i < config->pwr_reg_cnt; i++) {
+		ret = regulator_disable(hdmi->pwr_regs[i]);
+		if (ret) {
+			dev_err(dev->dev, "failed to disable pwr regulator: %s (%d)\n",
+					config->pwr_reg_names[i], ret);
+		}
+	}
+}
+
 static void hdmi_bridge_pre_enable(struct drm_bridge *bridge)
 {
 	struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
@@ -41,6 +101,12 @@ static void hdmi_bridge_pre_enable(struct drm_bridge *bridge)
 	struct hdmi_phy *phy = hdmi->phy;
 
 	DBG("power up");
+
+	if (!hdmi_bridge->power_on) {
+		power_on(bridge);
+		hdmi_bridge->power_on = true;
+	}
+
 	phy->funcs->powerup(phy, hdmi_bridge->pixclock);
 	hdmi_set_mode(hdmi, true);
 }
@@ -62,6 +128,11 @@ static void hdmi_bridge_post_disable(struct drm_bridge *bridge)
 	DBG("power down");
 	hdmi_set_mode(hdmi, false);
 	phy->funcs->powerdown(phy);
+
+	if (hdmi_bridge->power_on) {
+		power_off(bridge);
+		hdmi_bridge->power_on = false;
+	}
 }
 
 static void hdmi_bridge_mode_set(struct drm_bridge *bridge,