drm/nouveau/iccsense: Parse the resistors and config the right way

Previously we parsed that table a bit wrong:
1. The entry layout depends on the sensor type used.
2. We have all resitors in one entry for the INA3221.
3. The config is already included in the vbios.

This commit addresses that issue and with that we should be able to read
out the right power consumption for every GPU with a INA209, INA219 and
INA3221.

Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

2 files changed, 45 insertions, 86 deletions

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/base.c
index 41bd5d0f7692..658355fc9354 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/base.c
@@ -96,60 +96,12 @@ nvkm_iccsense_ina3221_read(struct nvkm_iccsense *iccsense,
 }
 
 static void
-nvkm_iccsense_ina209_config(struct nvkm_iccsense *iccsense,
-			    struct nvkm_iccsense_sensor *sensor)
-{
-	struct nvkm_subdev *subdev = &iccsense->subdev;
-	/* configuration:
-	 * 0x0007: 0x0007 shunt and bus continous
-	 * 0x0078: 0x0078 128 samples shunt
-	 * 0x0780: 0x0780 128 samples bus
-	 * 0x1800: 0x0000 +-40 mV shunt range
-	 * 0x2000: 0x0000 16V FSR
-         */
-	u16 value = 0x07ff;
-	nvkm_debug(subdev, "config for sensor id %i: 0x%x\n", sensor->id, value);
-	nv_wr16i2cr(sensor->i2c, sensor->addr, 0x00, value);
-}
-
-static void
-nvkm_iccsense_ina3221_config(struct nvkm_iccsense *iccsense,
-			     struct nvkm_iccsense_sensor *sensor)
-{
-	struct nvkm_subdev *subdev = &iccsense->subdev;
-	/* configuration:
-	 * 0x0007: 0x0007 shunt and bus continous
-	 * 0x0031: 0x0000 140 us conversion time shunt
-	 * 0x01c0: 0x0000 140 us conversion time bus
-	 * 0x0f00: 0x0f00 1024 samples
-	 * 0x7000: 0x?000 channels
-         */
-	u16 value = 0x0e07;
-	if (sensor->rail_mask & 0x1)
-		value |= 0x1 << 14;
-	if (sensor->rail_mask & 0x2)
-		value |= 0x1 << 13;
-	if (sensor->rail_mask & 0x4)
-		value |= 0x1 << 12;
-	nvkm_debug(subdev, "config for sensor id %i: 0x%x\n", sensor->id, value);
-	nv_wr16i2cr(sensor->i2c, sensor->addr, 0x00, value);
-}
-
-static void
 nvkm_iccsense_sensor_config(struct nvkm_iccsense *iccsense,
 		            struct nvkm_iccsense_sensor *sensor)
 {
-	switch (sensor->type) {
-	case NVBIOS_EXTDEV_INA209:
-	case NVBIOS_EXTDEV_INA219:
-		nvkm_iccsense_ina209_config(iccsense, sensor);
-		break;
-	case NVBIOS_EXTDEV_INA3221:
-		nvkm_iccsense_ina3221_config(iccsense, sensor);
-		break;
-	default:
-		break;
-	}
+	struct nvkm_subdev *subdev = &iccsense->subdev;
+	nvkm_trace(subdev, "write config of extdev %i: 0x%04x\n", sensor->id, sensor->config);
+	nv_wr16i2cr(sensor->i2c, sensor->addr, 0x00, sensor->config);
 }
 
 int
@@ -196,7 +148,6 @@ nvkm_iccsense_dtor(struct nvkm_subdev *subdev)
 static struct nvkm_iccsense_sensor*
 nvkm_iccsense_create_sensor(struct nvkm_iccsense *iccsense, u8 id)
 {
-
 	struct nvkm_subdev *subdev = &iccsense->subdev;
 	struct nvkm_bios *bios = subdev->device->bios;
 	struct nvkm_i2c *i2c = subdev->device->i2c;
@@ -245,7 +196,7 @@ nvkm_iccsense_create_sensor(struct nvkm_iccsense *iccsense, u8 id)
 	sensor->type = extdev.type;
 	sensor->i2c = &i2c_bus->i2c;
 	sensor->addr = addr;
-	sensor->rail_mask = 0x0;
+	sensor->config = 0x0;
 	return sensor;
 }
 
@@ -273,48 +224,56 @@ nvkm_iccsense_oneinit(struct nvkm_subdev *subdev)
 
 	iccsense->data_valid = true;
 	for (i = 0; i < stbl.nr_entry; ++i) {
-		struct pwr_rail_t *r = &stbl.rail[i];
-		struct nvkm_iccsense_rail *rail;
+		struct pwr_rail_t *pwr_rail = &stbl.rail[i];
 		struct nvkm_iccsense_sensor *sensor;
-		int (*read)(struct nvkm_iccsense *,
-			    struct nvkm_iccsense_rail *);
+		int r;
 
-		if (!r->mode || r->resistor_mohm == 0)
+		if (pwr_rail->mode != 1 || !pwr_rail->resistor_count)
 			continue;
 
-		sensor = nvkm_iccsense_get_sensor(iccsense, r->extdev_id);
+		sensor = nvkm_iccsense_get_sensor(iccsense, pwr_rail->extdev_id);
 		if (!sensor)
 			continue;
 
-		switch (sensor->type) {
-		case NVBIOS_EXTDEV_INA209:
-			if (r->rail != 0)
-				continue;
-			read = nvkm_iccsense_ina209_read;
-			break;
-		case NVBIOS_EXTDEV_INA219:
-			if (r->rail != 0)
+		if (!sensor->config)
+			sensor->config = pwr_rail->config;
+		else if (sensor->config != pwr_rail->config)
+			nvkm_error(subdev, "config mismatch found for extdev %i\n", pwr_rail->extdev_id);
+
+		for (r = 0; r < pwr_rail->resistor_count; ++r) {
+			struct nvkm_iccsense_rail *rail;
+			struct pwr_rail_resistor_t *res = &pwr_rail->resistors[r];
+			int (*read)(struct nvkm_iccsense *,
+				    struct nvkm_iccsense_rail *);
+
+			if (!res->mohm || !res->enabled)
 				continue;
-			read = nvkm_iccsense_ina219_read;
-			break;
-		case NVBIOS_EXTDEV_INA3221:
-			if (r->rail >= 3)
+
+			switch (sensor->type) {
+			case NVBIOS_EXTDEV_INA209:
+				read = nvkm_iccsense_ina209_read;
+				break;
+			case NVBIOS_EXTDEV_INA219:
+				read = nvkm_iccsense_ina219_read;
+				break;
+			case NVBIOS_EXTDEV_INA3221:
+				read = nvkm_iccsense_ina3221_read;
+				break;
+			default:
 				continue;
-			read = nvkm_iccsense_ina3221_read;
-			break;
-		default:
-			continue;
+			}
+
+			rail = kmalloc(sizeof(*rail), GFP_KERNEL);
+			if (!rail)
+				return -ENOMEM;
+
+			rail->read = read;
+			rail->sensor = sensor;
+			rail->idx = r;
+			rail->mohm = res->mohm;
+			nvkm_debug(subdev, "create rail for extdev %i: { idx: %i, mohm: %i }\n", pwr_rail->extdev_id, r, rail->mohm);
+			list_add_tail(&rail->head, &iccsense->rails);
 		}
-
-		rail = kmalloc(sizeof(*rail), GFP_KERNEL);
-		if (!rail)
-			return -ENOMEM;
-		sensor->rail_mask |= 1 << r->rail;
-		rail->read = read;
-		rail->sensor = sensor;
-		rail->idx = r->rail;
-		rail->mohm = r->resistor_mohm;
-		list_add_tail(&rail->head, &iccsense->rails);
 	}
 	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/priv.h b/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/priv.h
index b72c31d2f908..e90e0f6ed008 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/priv.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/priv.h
@@ -10,7 +10,7 @@ struct nvkm_iccsense_sensor {
 	enum nvbios_extdev_type type;
 	struct i2c_adapter *i2c;
 	u8 addr;
-	u8 rail_mask;
+	u16 config;
 };
 
 struct nvkm_iccsense_rail {