Merge tag 'drm-misc-next-2023-01-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.3:

UAPI Changes:

 * connector: Support analog-TV mode property
 * media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI,
   MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI

Cross-subsystem Changes:

 * dma-buf: Documentation fixes
 * i2c: Introduce i2c_client_get_device_id() helper

Core Changes:

 * Improve support for analog TV output
 * bridge: Remove unused drm_bridge_chain functions
 * debugfs: Add per-device helpers and convert various DRM drivers
 * dp-mst: Various fixes
 * fbdev emulation: Always pick 32 bpp as default
 * KUnit: Add tests for managed helpers; Various cleanups
 * panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
 * TTM: Open-code ttm_bo_wait() and remove the helper

Driver Changes:

 * Fix preferred depth and bpp values throughout DRM drivers
 * Remove #CONFIG_PM guards throughout DRM drivers
 * ast: Various fixes
 * bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505:
   Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip,
   Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640:
   Use atomic bridge functions
 * gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously
   during atomic update
 * ili9486: Support 16-bit pixel data
 * imx: Split off IPUv3 driver; Various fixes
 * mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i
   Support separate I/O-voltage supply
 * mxsfb: Depend on ARCH_MXS or ARCH_MXC
 * omapdrm: Various fixes
 * panel: Use ktime_get_boottime() to measure power-down delay in various
   drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a:
   Add support
 * sprd: Cleanups
 * sun4i: Convert to new TV-mode property
 * tidss: Various fixes
 * v3d: Various fixes
 * vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups;
   dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to
   bridge
 * virtio: Improve tracing
 * vkms: Support small cursors in IGT tests; Various fixes

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y7QIwlfElAYWxRcR@linux-uq9g

1 files changed, 12 insertions, 8 deletions

diff --git a/drivers/gpu/drm/tiny/ili9486.c b/drivers/gpu/drm/tiny/ili9486.c
index 1bb847466b10..02265c898816 100644
--- a/drivers/gpu/drm/tiny/ili9486.c
+++ b/drivers/gpu/drm/tiny/ili9486.c
@@ -43,6 +43,7 @@ static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
 			     size_t num)
 {
 	struct spi_device *spi = mipi->spi;
+	unsigned int bpw = 8;
 	void *data = par;
 	u32 speed_hz;
 	int i, ret;
@@ -56,8 +57,6 @@ static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
 	 * The displays are Raspberry Pi HATs and connected to the 8-bit only
 	 * SPI controller, so 16-bit command and parameters need byte swapping
 	 * before being transferred as 8-bit on the big endian SPI bus.
-	 * Pixel data bytes have already been swapped before this function is
-	 * called.
 	 */
 	buf[0] = cpu_to_be16(*cmd);
 	gpiod_set_value_cansleep(mipi->dc, 0);
@@ -71,12 +70,18 @@ static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
 		for (i = 0; i < num; i++)
 			buf[i] = cpu_to_be16(par[i]);
 		num *= 2;
-		speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
 		data = buf;
 	}
 
+	/*
+	 * Check whether pixel data bytes needs to be swapped or not
+	 */
+	if (*cmd == MIPI_DCS_WRITE_MEMORY_START && !mipi->swap_bytes)
+		bpw = 16;
+
 	gpiod_set_value_cansleep(mipi->dc, 1);
-	ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, data, num);
+	speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
+	ret = mipi_dbi_spi_transfer(spi, speed_hz, bpw, data, num);
  free:
 	kfree(buf);
 
@@ -150,10 +155,7 @@ static void waveshare_enable(struct drm_simple_display_pipe *pipe,
 }
 
 static const struct drm_simple_display_pipe_funcs waveshare_pipe_funcs = {
-	.mode_valid = mipi_dbi_pipe_mode_valid,
-	.enable = waveshare_enable,
-	.disable = mipi_dbi_pipe_disable,
-	.update = mipi_dbi_pipe_update,
+	DRM_MIPI_DBI_SIMPLE_DISPLAY_PIPE_FUNCS(waveshare_enable),
 };
 
 static const struct drm_display_mode waveshare_mode = {
@@ -183,6 +185,8 @@ MODULE_DEVICE_TABLE(of, ili9486_of_match);
 
 static const struct spi_device_id ili9486_id[] = {
 	{ "ili9486", 0 },
+	{ "rpi-lcd-35", 0 },
+	{ "piscreen", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, ili9486_id);