summaryrefslogtreecommitdiff
path: root/drivers/hwmon/sht3x.c
diff options
context:
space:
mode:
authorDavid Frey <david.frey@sensirion.com>2016-06-02 10:59:11 +0300
committerGuenter Roeck <linux@roeck-us.net>2016-06-28 04:58:03 +0300
commit7c84f7f80d6fcea36246b793d06c3555ca53ddcd (patch)
tree28469d58b195ac6a9c957b14a3c2f1ae65bfd60a /drivers/hwmon/sht3x.c
parent76b5808e8cb9d8be214a1bbf613e19b6e3ebb3fb (diff)
downloadlinux-7c84f7f80d6fcea36246b793d06c3555ca53ddcd.tar.xz
hwmon: add support for Sensirion SHT3x sensors
This driver implements support for the Sensirion SHT3x-DIS chip, a humidity and temperature sensor. Temperature is measured in degrees celsius, relative humidity is expressed as a percentage. In the sysfs interface, all values are scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. Signed-off-by: Pascal Sachs <pascal.sachs@sensirion.com> [groeck: Fixed 'Variable length array is used' gcc warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'drivers/hwmon/sht3x.c')
-rw-r--r--drivers/hwmon/sht3x.c725
1 files changed, 725 insertions, 0 deletions
diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c
new file mode 100644
index 000000000000..707a3f85385b
--- /dev/null
+++ b/drivers/hwmon/sht3x.c
@@ -0,0 +1,725 @@
+/* Sensirion SHT3x-DIS humidity and temperature sensor driver.
+ * The SHT3x comes in many different versions, this driver is for the
+ * I2C version only.
+ *
+ * Copyright (C) 2016 Sensirion AG, Switzerland
+ * Author: David Frey <david.frey@sensirion.com>
+ * Author: Pascal Sachs <pascal.sachs@sensirion.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/page.h>
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_data/sht3x.h>
+
+/* commands (high precision mode) */
+static const unsigned char sht3x_cmd_measure_blocking_hpm[] = { 0x2c, 0x06 };
+static const unsigned char sht3x_cmd_measure_nonblocking_hpm[] = { 0x24, 0x00 };
+
+/* commands (low power mode) */
+static const unsigned char sht3x_cmd_measure_blocking_lpm[] = { 0x2c, 0x10 };
+static const unsigned char sht3x_cmd_measure_nonblocking_lpm[] = { 0x24, 0x16 };
+
+/* commands for periodic mode */
+static const unsigned char sht3x_cmd_measure_periodic_mode[] = { 0xe0, 0x00 };
+static const unsigned char sht3x_cmd_break[] = { 0x30, 0x93 };
+
+/* other commands */
+static const unsigned char sht3x_cmd_read_status_reg[] = { 0xf3, 0x2d };
+static const unsigned char sht3x_cmd_clear_status_reg[] = { 0x30, 0x41 };
+
+/* delays for non-blocking i2c commands, both in us */
+#define SHT3X_NONBLOCKING_WAIT_TIME_HPM 15000
+#define SHT3X_NONBLOCKING_WAIT_TIME_LPM 4000
+
+#define SHT3X_WORD_LEN 2
+#define SHT3X_CMD_LENGTH 2
+#define SHT3X_CRC8_LEN 1
+#define SHT3X_RESPONSE_LENGTH 6
+#define SHT3X_CRC8_POLYNOMIAL 0x31
+#define SHT3X_CRC8_INIT 0xFF
+#define SHT3X_MIN_TEMPERATURE -45000
+#define SHT3X_MAX_TEMPERATURE 130000
+#define SHT3X_MIN_HUMIDITY 0
+#define SHT3X_MAX_HUMIDITY 100000
+
+enum sht3x_chips {
+ sht3x,
+ sts3x,
+};
+
+enum sht3x_limits {
+ limit_max = 0,
+ limit_max_hyst,
+ limit_min,
+ limit_min_hyst,
+};
+
+DECLARE_CRC8_TABLE(sht3x_crc8_table);
+
+/* periodic measure commands (high precision mode) */
+static const char periodic_measure_commands_hpm[][SHT3X_CMD_LENGTH] = {
+ /* 0.5 measurements per second */
+ {0x20, 0x32},
+ /* 1 measurements per second */
+ {0x21, 0x30},
+ /* 2 measurements per second */
+ {0x22, 0x36},
+ /* 4 measurements per second */
+ {0x23, 0x34},
+ /* 10 measurements per second */
+ {0x27, 0x37},
+};
+
+/* periodic measure commands (low power mode) */
+static const char periodic_measure_commands_lpm[][SHT3X_CMD_LENGTH] = {
+ /* 0.5 measurements per second */
+ {0x20, 0x2f},
+ /* 1 measurements per second */
+ {0x21, 0x2d},
+ /* 2 measurements per second */
+ {0x22, 0x2b},
+ /* 4 measurements per second */
+ {0x23, 0x29},
+ /* 10 measurements per second */
+ {0x27, 0x2a},
+};
+
+struct sht3x_limit_commands {
+ const char read_command[SHT3X_CMD_LENGTH];
+ const char write_command[SHT3X_CMD_LENGTH];
+};
+
+static const struct sht3x_limit_commands limit_commands[] = {
+ /* temp1_max, humidity1_max */
+ [limit_max] = { {0xe1, 0x1f}, {0x61, 0x1d} },
+ /* temp_1_max_hyst, humidity1_max_hyst */
+ [limit_max_hyst] = { {0xe1, 0x14}, {0x61, 0x16} },
+ /* temp1_min, humidity1_min */
+ [limit_min] = { {0xe1, 0x02}, {0x61, 0x00} },
+ /* temp_1_min_hyst, humidity1_min_hyst */
+ [limit_min_hyst] = { {0xe1, 0x09}, {0x61, 0x0B} },
+};
+
+#define SHT3X_NUM_LIMIT_CMD ARRAY_SIZE(limit_commands)
+
+static const u16 mode_to_update_interval[] = {
+ 0,
+ 2000,
+ 1000,
+ 500,
+ 250,
+ 100,
+};
+
+struct sht3x_data {
+ struct i2c_client *client;
+ struct mutex i2c_lock; /* lock for sending i2c commands */
+ struct mutex data_lock; /* lock for updating driver data */
+
+ u8 mode;
+ const unsigned char *command;
+ u32 wait_time; /* in us*/
+ unsigned long last_update; /* last update in periodic mode*/
+
+ struct sht3x_platform_data setup;
+
+ /*
+ * cached values for temperature and humidity and limits
+ * the limits arrays have the following order:
+ * max, max_hyst, min, min_hyst
+ */
+ int temperature;
+ int temperature_limits[SHT3X_NUM_LIMIT_CMD];
+ u32 humidity;
+ u32 humidity_limits[SHT3X_NUM_LIMIT_CMD];
+};
+
+static u8 get_mode_from_update_interval(u16 value)
+{
+ size_t index;
+ u8 number_of_modes = ARRAY_SIZE(mode_to_update_interval);
+
+ if (value == 0)
+ return 0;
+
+ /* find next faster update interval */
+ for (index = 1; index < number_of_modes; index++) {
+ if (mode_to_update_interval[index] <= value)
+ return index;
+ }
+
+ return number_of_modes - 1;
+}
+
+static int sht3x_read_from_command(struct i2c_client *client,
+ struct sht3x_data *data,
+ const char *command,
+ char *buf, int length, u32 wait_time)
+{
+ int ret;
+
+ mutex_lock(&data->i2c_lock);
+ ret = i2c_master_send(client, command, SHT3X_CMD_LENGTH);
+
+ if (ret != SHT3X_CMD_LENGTH) {
+ ret = ret < 0 ? ret : -EIO;
+ goto out;
+ }
+
+ if (wait_time)
+ usleep_range(wait_time, wait_time + 1000);
+
+ ret = i2c_master_recv(client, buf, length);
+ if (ret != length) {
+ ret = ret < 0 ? ret : -EIO;
+ goto out;
+ }
+
+ ret = 0;
+out:
+ mutex_unlock(&data->i2c_lock);
+ return ret;
+}
+
+static int sht3x_extract_temperature(u16 raw)
+{
+ /*
+ * From datasheet:
+ * T = -45 + 175 * ST / 2^16
+ * Adapted for integer fixed point (3 digit) arithmetic.
+ */
+ return ((21875 * (int)raw) >> 13) - 45000;
+}
+
+static u32 sht3x_extract_humidity(u16 raw)
+{
+ /*
+ * From datasheet:
+ * RH = 100 * SRH / 2^16
+ * Adapted for integer fixed point (3 digit) arithmetic.
+ */
+ return (12500 * (u32)raw) >> 13;
+}
+
+static struct sht3x_data *sht3x_update_client(struct device *dev)
+{
+ struct sht3x_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ u16 interval_ms = mode_to_update_interval[data->mode];
+ unsigned long interval_jiffies = msecs_to_jiffies(interval_ms);
+ unsigned char buf[SHT3X_RESPONSE_LENGTH];
+ u16 val;
+ int ret = 0;
+
+ mutex_lock(&data->data_lock);
+ /*
+ * Only update cached readings once per update interval in periodic
+ * mode. In single shot mode the sensor measures values on demand, so
+ * every time the sysfs interface is called, a measurement is triggered.
+ * In periodic mode however, the measurement process is handled
+ * internally by the sensor and reading out sensor values only makes
+ * sense if a new reading is available.
+ */
+ if (time_after(jiffies, data->last_update + interval_jiffies)) {
+ ret = sht3x_read_from_command(client, data, data->command, buf,
+ sizeof(buf), data->wait_time);
+ if (ret)
+ goto out;
+
+ val = be16_to_cpup((__be16 *)buf);
+ data->temperature = sht3x_extract_temperature(val);
+ val = be16_to_cpup((__be16 *)(buf + 3));
+ data->humidity = sht3x_extract_humidity(val);
+ data->last_update = jiffies;
+ }
+
+out:
+ mutex_unlock(&data->data_lock);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return data;
+}
+
+/* sysfs attributes */
+static ssize_t temp1_input_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sht3x_data *data = sht3x_update_client(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return sprintf(buf, "%d\n", data->temperature);
+}
+
+static ssize_t humidity1_input_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sht3x_data *data = sht3x_update_client(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return sprintf(buf, "%u\n", data->humidity);
+}
+
+/*
+ * limits_update must only be called from probe or with data_lock held
+ */
+static int limits_update(struct sht3x_data *data)
+{
+ int ret;
+ u8 index;
+ int temperature;
+ u32 humidity;
+ u16 raw;
+ char buffer[SHT3X_RESPONSE_LENGTH];
+ const struct sht3x_limit_commands *commands;
+ struct i2c_client *client = data->client;
+
+ for (index = 0; index < SHT3X_NUM_LIMIT_CMD; index++) {
+ commands = &limit_commands[index];
+ ret = sht3x_read_from_command(client, data,
+ commands->read_command, buffer,
+ SHT3X_RESPONSE_LENGTH, 0);
+
+ if (ret)
+ return ret;
+
+ raw = be16_to_cpup((__be16 *)buffer);
+ temperature = sht3x_extract_temperature((raw & 0x01ff) << 7);
+ humidity = sht3x_extract_humidity(raw & 0xfe00);
+ data->temperature_limits[index] = temperature;
+ data->humidity_limits[index] = humidity;
+ }
+
+ return ret;
+}
+
+static ssize_t temp1_limit_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sht3x_data *data = dev_get_drvdata(dev);
+ u8 index = to_sensor_dev_attr(attr)->index;
+ int temperature_limit = data->temperature_limits[index];
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", temperature_limit);
+}
+
+static ssize_t humidity1_limit_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sht3x_data *data = dev_get_drvdata(dev);
+ u8 index = to_sensor_dev_attr(attr)->index;
+ u32 humidity_limit = data->humidity_limits[index];
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", humidity_limit);
+}
+
+/*
+ * limit_store must only be called with data_lock held
+ */
+static size_t limit_store(struct device *dev,
+ size_t count,
+ u8 index,
+ int temperature,
+ u32 humidity)
+{
+ char buffer[SHT3X_CMD_LENGTH + SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
+ char *position = buffer;
+ int ret;
+ u16 raw;
+ struct sht3x_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ const struct sht3x_limit_commands *commands;
+
+ commands = &limit_commands[index];
+
+ memcpy(position, commands->write_command, SHT3X_CMD_LENGTH);
+ position += SHT3X_CMD_LENGTH;
+ /*
+ * ST = (T + 45) / 175 * 2^16
+ * SRH = RH / 100 * 2^16
+ * adapted for fixed point arithmetic and packed the same as
+ * in limit_show()
+ */
+ raw = ((u32)(temperature + 45000) * 24543) >> (16 + 7);
+ raw |= ((humidity * 42950) >> 16) & 0xfe00;
+
+ *((__be16 *)position) = cpu_to_be16(raw);
+ position += SHT3X_WORD_LEN;
+ *position = crc8(sht3x_crc8_table,
+ position - SHT3X_WORD_LEN,
+ SHT3X_WORD_LEN,
+ SHT3X_CRC8_INIT);
+
+ mutex_lock(&data->i2c_lock);
+ ret = i2c_master_send(client, buffer, sizeof(buffer));
+ mutex_unlock(&data->i2c_lock);
+
+ if (ret != sizeof(buffer))
+ return ret < 0 ? ret : -EIO;
+
+ data->temperature_limits[index] = temperature;
+ data->humidity_limits[index] = humidity;
+ return count;
+}
+
+static ssize_t temp1_limit_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int temperature;
+ int ret;
+ struct sht3x_data *data = dev_get_drvdata(dev);
+ u8 index = to_sensor_dev_attr(attr)->index;
+
+ ret = kstrtoint(buf, 0, &temperature);
+ if (ret)
+ return ret;
+
+ temperature = clamp_val(temperature, SHT3X_MIN_TEMPERATURE,
+ SHT3X_MAX_TEMPERATURE);
+ mutex_lock(&data->data_lock);
+ ret = limit_store(dev, count, index, temperature,
+ data->humidity_limits[index]);
+ mutex_unlock(&data->data_lock);
+
+ return ret;
+}
+
+static ssize_t humidity1_limit_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ u32 humidity;
+ int ret;
+ struct sht3x_data *data = dev_get_drvdata(dev);
+ u8 index = to_sensor_dev_attr(attr)->index;
+
+ ret = kstrtou32(buf, 0, &humidity);
+ if (ret)
+ return ret;
+
+ humidity = clamp_val(humidity, SHT3X_MIN_HUMIDITY, SHT3X_MAX_HUMIDITY);
+ mutex_lock(&data->data_lock);
+ ret = limit_store(dev, count, index, data->temperature_limits[index],
+ humidity);
+ mutex_unlock(&data->data_lock);
+
+ return ret;
+}
+
+static void sht3x_select_command(struct sht3x_data *data)
+{
+ /*
+ * In blocking mode (clock stretching mode) the I2C bus
+ * is blocked for other traffic, thus the call to i2c_master_recv()
+ * will wait until the data is ready. For non blocking mode, we
+ * have to wait ourselves.
+ */
+ if (data->mode > 0) {
+ data->command = sht3x_cmd_measure_periodic_mode;
+ data->wait_time = 0;
+ } else if (data->setup.blocking_io) {
+ data->command = data->setup.high_precision ?
+ sht3x_cmd_measure_blocking_hpm :
+ sht3x_cmd_measure_blocking_lpm;
+ data->wait_time = 0;
+ } else {
+ if (data->setup.high_precision) {
+ data->command = sht3x_cmd_measure_nonblocking_hpm;
+ data->wait_time = SHT3X_NONBLOCKING_WAIT_TIME_HPM;
+ } else {
+ data->command = sht3x_cmd_measure_nonblocking_lpm;
+ data->wait_time = SHT3X_NONBLOCKING_WAIT_TIME_LPM;
+ }
+ }
+}
+
+static int status_register_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buffer, int length)
+{
+ int ret;
+ struct sht3x_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+
+ ret = sht3x_read_from_command(client, data, sht3x_cmd_read_status_reg,
+ buffer, length, 0);
+
+ return ret;
+}
+
+static ssize_t temp1_alarm_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
+ int ret;
+
+ ret = status_register_read(dev, attr, buffer,
+ SHT3X_WORD_LEN + SHT3X_CRC8_LEN);
+ if (ret)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", !!(buffer[0] & 0x04));
+}
+
+static ssize_t humidity1_alarm_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
+ int ret;
+
+ ret = status_register_read(dev, attr, buffer,
+ SHT3X_WORD_LEN + SHT3X_CRC8_LEN);
+ if (ret)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", !!(buffer[0] & 0x08));
+}
+
+static ssize_t update_interval_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sht3x_data *data = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ mode_to_update_interval[data->mode]);
+}
+
+static ssize_t update_interval_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ u16 update_interval;
+ u8 mode;
+ int ret;
+ const char *command;
+ struct sht3x_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+
+ ret = kstrtou16(buf, 0, &update_interval);
+ if (ret)
+ return ret;
+
+ mode = get_mode_from_update_interval(update_interval);
+
+ mutex_lock(&data->data_lock);
+ /* mode did not change */
+ if (mode == data->mode) {
+ mutex_unlock(&data->data_lock);
+ return count;
+ }
+
+ mutex_lock(&data->i2c_lock);
+ /*
+ * Abort periodic measure mode.
+ * To do any changes to the configuration while in periodic mode, we
+ * have to send a break command to the sensor, which then falls back
+ * to single shot (mode = 0).
+ */
+ if (data->mode > 0) {
+ ret = i2c_master_send(client, sht3x_cmd_break,
+ SHT3X_CMD_LENGTH);
+ if (ret != SHT3X_CMD_LENGTH)
+ goto out;
+ data->mode = 0;
+ }
+
+ if (mode > 0) {
+ if (data->setup.high_precision)
+ command = periodic_measure_commands_hpm[mode - 1];
+ else
+ command = periodic_measure_commands_lpm[mode - 1];
+
+ /* select mode */
+ ret = i2c_master_send(client, command, SHT3X_CMD_LENGTH);
+ if (ret != SHT3X_CMD_LENGTH)
+ goto out;
+ }
+
+ /* select mode and command */
+ data->mode = mode;
+ sht3x_select_command(data);
+
+out:
+ mutex_unlock(&data->i2c_lock);
+ mutex_unlock(&data->data_lock);
+ if (ret != SHT3X_CMD_LENGTH)
+ return ret < 0 ? ret : -EIO;
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, temp1_input_show, NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input, S_IRUGO, humidity1_input_show,
+ NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+ temp1_limit_show, temp1_limit_store,
+ limit_max);
+static SENSOR_DEVICE_ATTR(humidity1_max, S_IRUGO | S_IWUSR,
+ humidity1_limit_show, humidity1_limit_store,
+ limit_max);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
+ temp1_limit_show, temp1_limit_store,
+ limit_max_hyst);
+static SENSOR_DEVICE_ATTR(humidity1_max_hyst, S_IRUGO | S_IWUSR,
+ humidity1_limit_show, humidity1_limit_store,
+ limit_max_hyst);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR,
+ temp1_limit_show, temp1_limit_store,
+ limit_min);
+static SENSOR_DEVICE_ATTR(humidity1_min, S_IRUGO | S_IWUSR,
+ humidity1_limit_show, humidity1_limit_store,
+ limit_min);
+static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO | S_IWUSR,
+ temp1_limit_show, temp1_limit_store,
+ limit_min_hyst);
+static SENSOR_DEVICE_ATTR(humidity1_min_hyst, S_IRUGO | S_IWUSR,
+ humidity1_limit_show, humidity1_limit_store,
+ limit_min_hyst);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, temp1_alarm_show, NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_alarm, S_IRUGO, humidity1_alarm_show,
+ NULL, 0);
+static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR,
+ update_interval_show, update_interval_store, 0);
+
+static struct attribute *sht3x_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_humidity1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_humidity1_max.dev_attr.attr,
+ &sensor_dev_attr_humidity1_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
+ &sensor_dev_attr_humidity1_min.dev_attr.attr,
+ &sensor_dev_attr_humidity1_min_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_humidity1_alarm.dev_attr.attr,
+ &sensor_dev_attr_update_interval.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *sts3x_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(sht3x);
+ATTRIBUTE_GROUPS(sts3x);
+
+static int sht3x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct sht3x_data *data;
+ struct device *hwmon_dev;
+ struct i2c_adapter *adap = client->adapter;
+ struct device *dev = &client->dev;
+ const struct attribute_group **attribute_groups;
+
+ /*
+ * we require full i2c support since the sht3x uses multi-byte read and
+ * writes as well as multi-byte commands which are not supported by
+ * the smbus protocol
+ */
+ if (!i2c_check_functionality(adap, I2C_FUNC_I2C))
+ return -ENODEV;
+
+ ret = i2c_master_send(client, sht3x_cmd_clear_status_reg,
+ SHT3X_CMD_LENGTH);
+ if (ret != SHT3X_CMD_LENGTH)
+ return ret < 0 ? ret : -ENODEV;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->setup.blocking_io = false;
+ data->setup.high_precision = true;
+ data->mode = 0;
+ data->last_update = 0;
+ data->client = client;
+ crc8_populate_msb(sht3x_crc8_table, SHT3X_CRC8_POLYNOMIAL);
+
+ if (client->dev.platform_data)
+ data->setup = *(struct sht3x_platform_data *)dev->platform_data;
+
+ sht3x_select_command(data);
+
+ mutex_init(&data->i2c_lock);
+ mutex_init(&data->data_lock);
+
+ ret = limits_update(data);
+ if (ret)
+ return ret;
+
+ if (id->driver_data == sts3x)
+ attribute_groups = sts3x_groups;
+ else
+ attribute_groups = sht3x_groups;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev,
+ client->name,
+ data,
+ attribute_groups);
+
+ if (IS_ERR(hwmon_dev))
+ dev_dbg(dev, "unable to register hwmon device\n");
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+/* device ID table */
+static const struct i2c_device_id sht3x_ids[] = {
+ {"sht3x", sht3x},
+ {"sts3x", sts3x},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, sht3x_ids);
+
+static struct i2c_driver sht3x_i2c_driver = {
+ .driver.name = "sht3x",
+ .probe = sht3x_probe,
+ .id_table = sht3x_ids,
+};
+
+module_i2c_driver(sht3x_i2c_driver);
+
+MODULE_AUTHOR("David Frey <david.frey@sensirion.com>");
+MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");
+MODULE_DESCRIPTION("Sensirion SHT3x humidity and temperature sensor driver");
+MODULE_LICENSE("GPL");