summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
authorDr. David Alan Gilbert <linux@treblig.org>2019-12-25 05:32:24 +0300
committerGuenter Roeck <linux@roeck-us.net>2020-01-24 00:15:10 +0300
commit695955028a42793fd09c3149727cbb8085ec6905 (patch)
tree7819fce7d8760cbf12d92caabdf58a2fe1b7fb3d /drivers/hwmon
parent3207408ab4cbe242d48471ce4e10047022a65232 (diff)
downloadlinux-695955028a42793fd09c3149727cbb8085ec6905.tar.xz
hwmon: (w83627ehf) Remove code not needed after nct677* removal
Now the nct677* are gone, we can clean up some flags that are always the same now and simplify some code. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20191225023225.2785-3-linux@treblig.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/w83627ehf.c138
1 files changed, 32 insertions, 106 deletions
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 47edca0ffe53..e13bec80af0b 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -65,10 +65,6 @@ static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
-static unsigned short fan_debounce;
-module_param(fan_debounce, ushort, 0);
-MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
-
#define DRVNAME "w83627ehf"
/*
@@ -309,7 +305,6 @@ static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scale_in)
struct w83627ehf_data {
int addr; /* IO base of hw monitor block */
const char *name;
- enum kinds kind; /* Convenience copy of sio_data->kind */
struct mutex lock;
@@ -320,20 +315,10 @@ struct w83627ehf_data {
u8 temp_src[NUM_REG_TEMP];
const char * const *temp_label;
- const u16 *REG_PWM;
- const u16 *REG_TARGET;
- const u16 *REG_FAN;
- const u16 *REG_FAN_MIN;
- const u16 *REG_FAN_START_OUTPUT;
- const u16 *REG_FAN_STOP_OUTPUT;
- const u16 *REG_FAN_STOP_TIME;
const u16 *REG_FAN_MAX_OUTPUT;
const u16 *REG_FAN_STEP_OUTPUT;
const u16 *scale_in;
- unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
- unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
-
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -349,7 +334,6 @@ struct w83627ehf_data {
u8 fan_div[5];
u8 has_fan; /* some fan inputs can be disabled */
u8 has_fan_min; /* some fans don't have min register */
- bool has_fan_div;
u8 temp_type[3];
s8 temp_offset[3];
s16 temp[9];
@@ -527,12 +511,6 @@ static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
}
}
-static void w83627ehf_write_fan_div_common(struct device *dev,
- struct w83627ehf_data *data, int nr)
-{
- w83627ehf_write_fan_div(data, nr);
-}
-
static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
{
int i;
@@ -558,12 +536,6 @@ static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
}
}
-static void w83627ehf_update_fan_div_common(struct device *dev,
- struct w83627ehf_data *data)
-{
- w83627ehf_update_fan_div(data);
-}
-
static void w83627ehf_update_pwm(struct w83627ehf_data *data)
{
int i;
@@ -584,18 +556,12 @@ static void w83627ehf_update_pwm(struct w83627ehf_data *data)
((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1;
data->pwm_enable[i] = ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i])
& 3) + 1;
- data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]);
+ data->pwm[i] = w83627ehf_read_value(data, W83627EHF_REG_PWM[i]);
data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) & 0x0f;
}
}
-static void w83627ehf_update_pwm_common(struct device *dev,
- struct w83627ehf_data *data)
-{
- w83627ehf_update_pwm(data);
-}
-
static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
{
struct w83627ehf_data *data = dev_get_drvdata(dev);
@@ -606,7 +572,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
if (time_after(jiffies, data->last_updated + HZ + HZ/2)
|| !data->valid) {
/* Fan clock dividers */
- w83627ehf_update_fan_div_common(dev, data);
+ w83627ehf_update_fan_div(data);
/* Measured voltages and limits */
for (i = 0; i < data->in_num; i++) {
@@ -628,39 +594,36 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
if (!(data->has_fan & (1 << i)))
continue;
- reg = w83627ehf_read_value(data, data->REG_FAN[i]);
- data->rpm[i] = data->fan_from_reg(reg,
- data->fan_div[i]);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_FAN[i]);
+ data->rpm[i] = fan_from_reg8(reg, data->fan_div[i]);
if (data->has_fan_min & (1 << i))
data->fan_min[i] = w83627ehf_read_value(data,
- data->REG_FAN_MIN[i]);
+ W83627EHF_REG_FAN_MIN[i]);
/*
* If we failed to measure the fan speed and clock
* divider can be increased, let's try that for next
* time
*/
- if (data->has_fan_div
- && reg >= 0xff
- && data->fan_div[i] < 0x07) {
+ if (reg >= 0xff && data->fan_div[i] < 0x07) {
dev_dbg(dev,
"Increasing fan%d clock divider from %u to %u\n",
i + 1, div_from_reg(data->fan_div[i]),
div_from_reg(data->fan_div[i] + 1));
data->fan_div[i]++;
- w83627ehf_write_fan_div_common(dev, data, i);
+ w83627ehf_write_fan_div(data, i);
/* Preserve min limit if possible */
if ((data->has_fan_min & (1 << i))
&& data->fan_min[i] >= 2
&& data->fan_min[i] != 255)
w83627ehf_write_value(data,
- data->REG_FAN_MIN[i],
+ W83627EHF_REG_FAN_MIN[i],
(data->fan_min[i] /= 2));
}
}
- w83627ehf_update_pwm_common(dev, data);
+ w83627ehf_update_pwm(data);
for (i = 0; i < data->pwm_num; i++) {
if (!(data->has_fan & (1 << i)))
@@ -668,13 +631,13 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
data->fan_start_output[i] =
w83627ehf_read_value(data,
- data->REG_FAN_START_OUTPUT[i]);
+ W83627EHF_REG_FAN_START_OUTPUT[i]);
data->fan_stop_output[i] =
w83627ehf_read_value(data,
- data->REG_FAN_STOP_OUTPUT[i]);
+ W83627EHF_REG_FAN_STOP_OUTPUT[i]);
data->fan_stop_time[i] =
w83627ehf_read_value(data,
- data->REG_FAN_STOP_TIME[i]);
+ W83627EHF_REG_FAN_STOP_TIME[i]);
if (data->REG_FAN_MAX_OUTPUT &&
data->REG_FAN_MAX_OUTPUT[i] != 0xff)
@@ -690,7 +653,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
data->target_temp[i] =
w83627ehf_read_value(data,
- data->REG_TARGET[i]) &
+ W83627EHF_REG_TARGET[i]) &
(data->pwm_mode[i] == 1 ? 0x7f : 0xff);
}
@@ -763,22 +726,6 @@ store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel,
return -EINVAL;
mutex_lock(&data->update_lock);
- if (!data->has_fan_div) {
- /*
- * Only NCT6776F for now, so we know that this is a 13 bit
- * register
- */
- if (!val) {
- val = 0xff1f;
- } else {
- if (val > 1350000U)
- val = 135000U;
- val = 1350000U / val;
- val = (val & 0x1f) | ((val << 3) & 0xff00);
- }
- data->fan_min[channel] = val;
- goto done; /* Leave fan divider alone */
- }
if (!val) {
/* No min limit, alarm disabled */
data->fan_min[channel] = 255;
@@ -794,7 +741,7 @@ store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel,
new_div = 7; /* 128 == (1 << 7) */
dev_warn(dev,
"fan%u low limit %lu below minimum %u, set to minimum\n",
- channel + 1, val, data->fan_from_reg_min(254, 7));
+ channel + 1, val, fan_from_reg8(254, 7));
} else if (!reg) {
/*
* Speed above this value cannot possibly be represented,
@@ -804,7 +751,7 @@ store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel,
new_div = 0; /* 1 == (1 << 0) */
dev_warn(dev,
"fan%u low limit %lu above maximum %u, set to maximum\n",
- channel + 1, val, data->fan_from_reg_min(1, 0));
+ channel + 1, val, fan_from_reg8(1, 0));
} else {
/*
* Automatically pick the best divider, i.e. the one such
@@ -828,12 +775,12 @@ store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel,
channel + 1, div_from_reg(data->fan_div[channel]),
div_from_reg(new_div));
data->fan_div[channel] = new_div;
- w83627ehf_write_fan_div_common(dev, data, channel);
+ w83627ehf_write_fan_div(data, channel);
/* Give the chip time to sample a new speed value */
data->last_updated = jiffies;
}
-done:
- w83627ehf_write_value(data, data->REG_FAN_MIN[channel],
+
+ w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[channel],
data->fan_min[channel]);
mutex_unlock(&data->update_lock);
@@ -895,7 +842,7 @@ store_pwm(struct device *dev, struct w83627ehf_data *data, int channel,
mutex_lock(&data->update_lock);
data->pwm[channel] = val;
- w83627ehf_write_value(data, data->REG_PWM[channel], val);
+ w83627ehf_write_value(data, W83627EHF_REG_PWM[channel], val);
mutex_unlock(&data->update_lock);
return 0;
}
@@ -954,7 +901,7 @@ store_target_temp(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->update_lock);
data->target_temp[nr] = val;
- w83627ehf_write_value(data, data->REG_TARGET[nr], val);
+ w83627ehf_write_value(data, W83627EHF_REG_TARGET[nr], val);
mutex_unlock(&data->update_lock);
return count;
}
@@ -1035,15 +982,15 @@ store_##reg(struct device *dev, struct device_attribute *attr, \
val = clamp_val(val, 1, 255); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
- w83627ehf_write_value(data, data->REG_##REG[nr], val); \
+ w83627ehf_write_value(data, REG[nr], val); \
mutex_unlock(&data->update_lock); \
return count; \
}
-fan_functions(fan_start_output, FAN_START_OUTPUT)
-fan_functions(fan_stop_output, FAN_STOP_OUTPUT)
-fan_functions(fan_max_output, FAN_MAX_OUTPUT)
-fan_functions(fan_step_output, FAN_STEP_OUTPUT)
+fan_functions(fan_start_output, W83627EHF_REG_FAN_START_OUTPUT)
+fan_functions(fan_stop_output, W83627EHF_REG_FAN_STOP_OUTPUT)
+fan_functions(fan_max_output, data->REG_FAN_MAX_OUTPUT)
+fan_functions(fan_step_output, data->REG_FAN_STEP_OUTPUT)
#define fan_time_functions(reg, REG) \
static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
@@ -1074,12 +1021,12 @@ store_##reg(struct device *dev, struct device_attribute *attr, \
val = step_time_to_reg(val, data->pwm_mode[nr]); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
- w83627ehf_write_value(data, data->REG_##REG[nr], val); \
+ w83627ehf_write_value(data, REG[nr], val); \
mutex_unlock(&data->update_lock); \
return count; \
} \
-fan_time_functions(fan_stop_time, FAN_STOP_TIME)
+fan_time_functions(fan_stop_time, W83627EHF_REG_FAN_STOP_TIME)
static SENSOR_DEVICE_ATTR(pwm4_stop_time, 0644, show_fan_stop_time,
store_fan_stop_time, 3);
@@ -1555,8 +1502,8 @@ w83627ehf_do_read_fan(struct w83627ehf_data *data, u32 attr,
*val = data->rpm[channel];
return 0;
case hwmon_fan_min:
- *val = data->fan_from_reg_min(data->fan_min[channel],
- data->fan_div[channel]);
+ *val = fan_from_reg8(data->fan_min[channel],
+ data->fan_div[channel]);
return 0;
case hwmon_fan_div:
*val = div_from_reg(data->fan_div[channel]);
@@ -1781,7 +1728,6 @@ static int w83627ehf_probe(struct platform_device *pdev)
mutex_init(&data->lock);
mutex_init(&data->update_lock);
data->name = w83627ehf_device_names[sio_data->kind];
- data->kind = sio_data->kind;
data->bank = 0xff; /* Force initial bank selection */
platform_set_drvdata(pdev, data);
@@ -1916,31 +1862,11 @@ static int w83627ehf_probe(struct platform_device *pdev)
}
if (sio_data->kind == w83667hg_b) {
- data->has_fan_div = true;
- data->fan_from_reg = fan_from_reg8;
- data->fan_from_reg_min = fan_from_reg8;
- data->REG_PWM = W83627EHF_REG_PWM;
- data->REG_TARGET = W83627EHF_REG_TARGET;
- data->REG_FAN = W83627EHF_REG_FAN;
- data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
- data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
- data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
- data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME;
data->REG_FAN_MAX_OUTPUT =
W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B;
data->REG_FAN_STEP_OUTPUT =
W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B;
} else {
- data->has_fan_div = true;
- data->fan_from_reg = fan_from_reg8;
- data->fan_from_reg_min = fan_from_reg8;
- data->REG_PWM = W83627EHF_REG_PWM;
- data->REG_TARGET = W83627EHF_REG_TARGET;
- data->REG_FAN = W83627EHF_REG_FAN;
- data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
- data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
- data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
- data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME;
data->REG_FAN_MAX_OUTPUT =
W83627EHF_REG_FAN_MAX_OUTPUT_COMMON;
data->REG_FAN_STEP_OUTPUT =
@@ -2017,10 +1943,10 @@ static int w83627ehf_probe(struct platform_device *pdev)
superio_exit(sio_data->sioreg);
/* Read fan clock dividers immediately */
- w83627ehf_update_fan_div_common(dev, data);
+ w83627ehf_update_fan_div(data);
/* Read pwm data to save original values */
- w83627ehf_update_pwm_common(dev, data);
+ w83627ehf_update_pwm(data);
for (i = 0; i < data->pwm_num; i++)
data->pwm_enable_orig[i] = data->pwm_enable[i];
@@ -2082,7 +2008,7 @@ static int w83627ehf_resume(struct device *dev)
if (!(data->has_fan_min & (1 << i)))
continue;
- w83627ehf_write_value(data, data->REG_FAN_MIN[i],
+ w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[i],
data->fan_min[i]);
}