summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2021-01-20 16:28:33 +0300
committerWolfram Sang <wsa@kernel.org>2021-01-22 11:56:56 +0300
commit1059b2bcc683ab29c25d542af4902bfdb3f91b40 (patch)
treee200765573bea5d124e4395c3f15df3632d326d1 /drivers/i2c
parent2cea84ddae1cc3af3969bfeae015aa303bf6e08d (diff)
downloadlinux-1059b2bcc683ab29c25d542af4902bfdb3f91b40.tar.xz
i2c: remove u300 bus driver
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/Kconfig13
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-stu300.c1008
3 files changed, 0 insertions, 1022 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index ce2efb56df54..4fe74259d44c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1032,19 +1032,6 @@ config I2C_STM32F7
This driver can also be built as module. If so, the module
will be called i2c-stm32f7.
-config I2C_STU300
- tristate "ST Microelectronics DDC I2C interface"
- depends on MACH_U300 || COMPILE_TEST
- default y if MACH_U300
- help
- If you say yes to this option, support will be included for the
- I2C interface from ST Microelectronics simply called "DDC I2C"
- supporting both I2C and DDC, used in e.g. the U300 series
- mobile platforms.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-stu300.
-
config I2C_SUN6I_P2WI
tristate "Allwinner sun6i internal P2WI controller"
depends on RESET_CONTROLLER
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 1c30bba977ef..572d5fcc6016 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -103,7 +103,6 @@ obj-$(CONFIG_I2C_ST) += i2c-st.o
obj-$(CONFIG_I2C_STM32F4) += i2c-stm32f4.o
i2c-stm32f7-drv-objs := i2c-stm32f7.o i2c-stm32.o
obj-$(CONFIG_I2C_STM32F7) += i2c-stm32f7-drv.o
-obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
obj-$(CONFIG_I2C_SUN6I_P2WI) += i2c-sun6i-p2wi.o
obj-$(CONFIG_I2C_SYNQUACER) += i2c-synquacer.o
obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
deleted file mode 100644
index 64d739baf480..000000000000
--- a/drivers/i2c/busses/i2c-stu300.c
+++ /dev/null
@@ -1,1008 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2007-2012 ST-Ericsson AB
- * ST DDC I2C master mode driver, used in e.g. U300 series platforms.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-/* the name of this kernel module */
-#define NAME "stu300"
-
-/* CR (Control Register) 8bit (R/W) */
-#define I2C_CR (0x00000000)
-#define I2C_CR_RESET_VALUE (0x00)
-#define I2C_CR_RESET_UMASK (0x00)
-#define I2C_CR_DDC1_ENABLE (0x80)
-#define I2C_CR_TRANS_ENABLE (0x40)
-#define I2C_CR_PERIPHERAL_ENABLE (0x20)
-#define I2C_CR_DDC2B_ENABLE (0x10)
-#define I2C_CR_START_ENABLE (0x08)
-#define I2C_CR_ACK_ENABLE (0x04)
-#define I2C_CR_STOP_ENABLE (0x02)
-#define I2C_CR_INTERRUPT_ENABLE (0x01)
-/* SR1 (Status Register 1) 8bit (R/-) */
-#define I2C_SR1 (0x00000004)
-#define I2C_SR1_RESET_VALUE (0x00)
-#define I2C_SR1_RESET_UMASK (0x00)
-#define I2C_SR1_EVF_IND (0x80)
-#define I2C_SR1_ADD10_IND (0x40)
-#define I2C_SR1_TRA_IND (0x20)
-#define I2C_SR1_BUSY_IND (0x10)
-#define I2C_SR1_BTF_IND (0x08)
-#define I2C_SR1_ADSL_IND (0x04)
-#define I2C_SR1_MSL_IND (0x02)
-#define I2C_SR1_SB_IND (0x01)
-/* SR2 (Status Register 2) 8bit (R/-) */
-#define I2C_SR2 (0x00000008)
-#define I2C_SR2_RESET_VALUE (0x00)
-#define I2C_SR2_RESET_UMASK (0x40)
-#define I2C_SR2_MASK (0xBF)
-#define I2C_SR2_SCLFAL_IND (0x80)
-#define I2C_SR2_ENDAD_IND (0x20)
-#define I2C_SR2_AF_IND (0x10)
-#define I2C_SR2_STOPF_IND (0x08)
-#define I2C_SR2_ARLO_IND (0x04)
-#define I2C_SR2_BERR_IND (0x02)
-#define I2C_SR2_DDC2BF_IND (0x01)
-/* CCR (Clock Control Register) 8bit (R/W) */
-#define I2C_CCR (0x0000000C)
-#define I2C_CCR_RESET_VALUE (0x00)
-#define I2C_CCR_RESET_UMASK (0x00)
-#define I2C_CCR_MASK (0xFF)
-#define I2C_CCR_FMSM (0x80)
-#define I2C_CCR_CC_MASK (0x7F)
-/* OAR1 (Own Address Register 1) 8bit (R/W) */
-#define I2C_OAR1 (0x00000010)
-#define I2C_OAR1_RESET_VALUE (0x00)
-#define I2C_OAR1_RESET_UMASK (0x00)
-#define I2C_OAR1_ADD_MASK (0xFF)
-/* OAR2 (Own Address Register 2) 8bit (R/W) */
-#define I2C_OAR2 (0x00000014)
-#define I2C_OAR2_RESET_VALUE (0x40)
-#define I2C_OAR2_RESET_UMASK (0x19)
-#define I2C_OAR2_MASK (0xE6)
-#define I2C_OAR2_FR_25_10MHZ (0x00)
-#define I2C_OAR2_FR_10_1667MHZ (0x20)
-#define I2C_OAR2_FR_1667_2667MHZ (0x40)
-#define I2C_OAR2_FR_2667_40MHZ (0x60)
-#define I2C_OAR2_FR_40_5333MHZ (0x80)
-#define I2C_OAR2_FR_5333_66MHZ (0xA0)
-#define I2C_OAR2_FR_66_80MHZ (0xC0)
-#define I2C_OAR2_FR_80_100MHZ (0xE0)
-#define I2C_OAR2_FR_MASK (0xE0)
-#define I2C_OAR2_ADD_MASK (0x06)
-/* DR (Data Register) 8bit (R/W) */
-#define I2C_DR (0x00000018)
-#define I2C_DR_RESET_VALUE (0x00)
-#define I2C_DR_RESET_UMASK (0xFF)
-#define I2C_DR_D_MASK (0xFF)
-/* ECCR (Extended Clock Control Register) 8bit (R/W) */
-#define I2C_ECCR (0x0000001C)
-#define I2C_ECCR_RESET_VALUE (0x00)
-#define I2C_ECCR_RESET_UMASK (0xE0)
-#define I2C_ECCR_MASK (0x1F)
-#define I2C_ECCR_CC_MASK (0x1F)
-
-/*
- * These events are more or less responses to commands
- * sent into the hardware, presumably reflecting the state
- * of an internal state machine.
- */
-enum stu300_event {
- STU300_EVENT_NONE = 0,
- STU300_EVENT_1,
- STU300_EVENT_2,
- STU300_EVENT_3,
- STU300_EVENT_4,
- STU300_EVENT_5,
- STU300_EVENT_6,
- STU300_EVENT_7,
- STU300_EVENT_8,
- STU300_EVENT_9
-};
-
-enum stu300_error {
- STU300_ERROR_NONE = 0,
- STU300_ERROR_ACKNOWLEDGE_FAILURE,
- STU300_ERROR_BUS_ERROR,
- STU300_ERROR_ARBITRATION_LOST,
- STU300_ERROR_UNKNOWN
-};
-
-/* timeout waiting for the controller to respond */
-#define STU300_TIMEOUT (msecs_to_jiffies(1000))
-
-/*
- * The number of address send athemps tried before giving up.
- * If the first one fails it seems like 5 to 8 attempts are required.
- */
-#define NUM_ADDR_RESEND_ATTEMPTS 12
-
-/* I2C clock speed, in Hz 0-400kHz*/
-static unsigned int scl_frequency = I2C_MAX_STANDARD_MODE_FREQ;
-module_param(scl_frequency, uint, 0644);
-
-/**
- * struct stu300_dev - the stu300 driver state holder
- * @pdev: parent platform device
- * @adapter: corresponding I2C adapter
- * @clk: hardware block clock
- * @irq: assigned interrupt line
- * @cmd_issue_lock: this locks the following cmd_ variables
- * @cmd_complete: acknowledge completion for an I2C command
- * @cmd_event: expected event coming in as a response to a command
- * @cmd_err: error code as response to a command
- * @speed: current bus speed in Hz
- * @msg_index: index of current message
- * @msg_len: length of current message
- */
-
-struct stu300_dev {
- struct platform_device *pdev;
- struct i2c_adapter adapter;
- void __iomem *virtbase;
- struct clk *clk;
- int irq;
- spinlock_t cmd_issue_lock;
- struct completion cmd_complete;
- enum stu300_event cmd_event;
- enum stu300_error cmd_err;
- unsigned int speed;
- int msg_index;
- int msg_len;
-};
-
-/* Local forward function declarations */
-static int stu300_init_hw(struct stu300_dev *dev);
-
-/*
- * The block needs writes in both MSW and LSW in order
- * for all data lines to reach their destination.
- */
-static inline void stu300_wr8(u32 value, void __iomem *address)
-{
- writel((value << 16) | value, address);
-}
-
-/*
- * This merely masks off the duplicates which appear
- * in bytes 1-3. You _MUST_ use 32-bit bus access on this
- * device, else it will not work.
- */
-static inline u32 stu300_r8(void __iomem *address)
-{
- return readl(address) & 0x000000FFU;
-}
-
-static void stu300_irq_enable(struct stu300_dev *dev)
-{
- u32 val;
- val = stu300_r8(dev->virtbase + I2C_CR);
- val |= I2C_CR_INTERRUPT_ENABLE;
- /* Twice paranoia (possible HW glitch) */
- stu300_wr8(val, dev->virtbase + I2C_CR);
- stu300_wr8(val, dev->virtbase + I2C_CR);
-}
-
-static void stu300_irq_disable(struct stu300_dev *dev)
-{
- u32 val;
- val = stu300_r8(dev->virtbase + I2C_CR);
- val &= ~I2C_CR_INTERRUPT_ENABLE;
- /* Twice paranoia (possible HW glitch) */
- stu300_wr8(val, dev->virtbase + I2C_CR);
- stu300_wr8(val, dev->virtbase + I2C_CR);
-}
-
-
-/*
- * Tells whether a certain event or events occurred in
- * response to a command. The events represent states in
- * the internal state machine of the hardware. The events
- * are not very well described in the hardware
- * documentation and can only be treated as abstract state
- * machine states.
- *
- * @ret 0 = event has not occurred or unknown error, any
- * other value means the correct event occurred or an error.
- */
-
-static int stu300_event_occurred(struct stu300_dev *dev,
- enum stu300_event mr_event) {
- u32 status1;
- u32 status2;
-
- /* What event happened? */
- status1 = stu300_r8(dev->virtbase + I2C_SR1);
-
- if (!(status1 & I2C_SR1_EVF_IND))
- /* No event at all */
- return 0;
-
- status2 = stu300_r8(dev->virtbase + I2C_SR2);
-
- /* Block any multiple interrupts */
- stu300_irq_disable(dev);
-
- /* Check for errors first */
- if (status2 & I2C_SR2_AF_IND) {
- dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
- return 1;
- } else if (status2 & I2C_SR2_BERR_IND) {
- dev->cmd_err = STU300_ERROR_BUS_ERROR;
- return 1;
- } else if (status2 & I2C_SR2_ARLO_IND) {
- dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;
- return 1;
- }
-
- switch (mr_event) {
- case STU300_EVENT_1:
- if (status1 & I2C_SR1_ADSL_IND)
- return 1;
- break;
- case STU300_EVENT_2:
- case STU300_EVENT_3:
- case STU300_EVENT_7:
- case STU300_EVENT_8:
- if (status1 & I2C_SR1_BTF_IND) {
- return 1;
- }
- break;
- case STU300_EVENT_4:
- if (status2 & I2C_SR2_STOPF_IND)
- return 1;
- break;
- case STU300_EVENT_5:
- if (status1 & I2C_SR1_SB_IND)
- /* Clear start bit */
- return 1;
- break;
- case STU300_EVENT_6:
- if (status2 & I2C_SR2_ENDAD_IND) {
- /* First check for any errors */
- return 1;
- }
- break;
- case STU300_EVENT_9:
- if (status1 & I2C_SR1_ADD10_IND)
- return 1;
- break;
- default:
- break;
- }
- /* If we get here, we're on thin ice.
- * Here we are in a status where we have
- * gotten a response that does not match
- * what we requested.
- */
- dev->cmd_err = STU300_ERROR_UNKNOWN;
- dev_err(&dev->pdev->dev,
- "Unhandled interrupt! %d sr1: 0x%x sr2: 0x%x\n",
- mr_event, status1, status2);
- return 0;
-}
-
-static irqreturn_t stu300_irh(int irq, void *data)
-{
- struct stu300_dev *dev = data;
- int res;
-
- /* Just make sure that the block is clocked */
- clk_enable(dev->clk);
-
- /* See if this was what we were waiting for */
- spin_lock(&dev->cmd_issue_lock);
-
- res = stu300_event_occurred(dev, dev->cmd_event);
- if (res || dev->cmd_err != STU300_ERROR_NONE)
- complete(&dev->cmd_complete);
-
- spin_unlock(&dev->cmd_issue_lock);
-
- clk_disable(dev->clk);
-
- return IRQ_HANDLED;
-}
-
-/*
- * Sends a command and then waits for the bits masked by *flagmask*
- * to go high or low by IRQ awaiting.
- */
-static int stu300_start_and_await_event(struct stu300_dev *dev,
- u8 cr_value,
- enum stu300_event mr_event)
-{
- int ret;
-
- /* Lock command issue, fill in an event we wait for */
- spin_lock_irq(&dev->cmd_issue_lock);
- init_completion(&dev->cmd_complete);
- dev->cmd_err = STU300_ERROR_NONE;
- dev->cmd_event = mr_event;
- spin_unlock_irq(&dev->cmd_issue_lock);
-
- /* Turn on interrupt, send command and wait. */
- cr_value |= I2C_CR_INTERRUPT_ENABLE;
- stu300_wr8(cr_value, dev->virtbase + I2C_CR);
- ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
- STU300_TIMEOUT);
- if (ret < 0) {
- dev_err(&dev->pdev->dev,
- "wait_for_completion_interruptible_timeout() "
- "returned %d waiting for event %04x\n", ret, mr_event);
- return ret;
- }
-
- if (ret == 0) {
- dev_err(&dev->pdev->dev, "controller timed out "
- "waiting for event %d, reinit hardware\n", mr_event);
- (void) stu300_init_hw(dev);
- return -ETIMEDOUT;
- }
-
- if (dev->cmd_err != STU300_ERROR_NONE) {
- dev_err(&dev->pdev->dev, "controller (start) "
- "error %d waiting for event %d, reinit hardware\n",
- dev->cmd_err, mr_event);
- (void) stu300_init_hw(dev);
- return -EIO;
- }
-
- return 0;
-}
-
-/*
- * This waits for a flag to be set, if it is not set on entry, an interrupt is
- * configured to wait for the flag using a completion.
- */
-static int stu300_await_event(struct stu300_dev *dev,
- enum stu300_event mr_event)
-{
- int ret;
-
- /* Is it already here? */
- spin_lock_irq(&dev->cmd_issue_lock);
- dev->cmd_err = STU300_ERROR_NONE;
- dev->cmd_event = mr_event;
-
- init_completion(&dev->cmd_complete);
-
- /* Turn on the I2C interrupt for current operation */
- stu300_irq_enable(dev);
-
- /* Unlock the command block and wait for the event to occur */
- spin_unlock_irq(&dev->cmd_issue_lock);
-
- ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
- STU300_TIMEOUT);
- if (ret < 0) {
- dev_err(&dev->pdev->dev,
- "wait_for_completion_interruptible_timeout()"
- "returned %d waiting for event %04x\n", ret, mr_event);
- return ret;
- }
-
- if (ret == 0) {
- if (mr_event != STU300_EVENT_6) {
- dev_err(&dev->pdev->dev, "controller "
- "timed out waiting for event %d, reinit "
- "hardware\n", mr_event);
- (void) stu300_init_hw(dev);
- }
- return -ETIMEDOUT;
- }
-
- if (dev->cmd_err != STU300_ERROR_NONE) {
- if (mr_event != STU300_EVENT_6) {
- dev_err(&dev->pdev->dev, "controller "
- "error (await_event) %d waiting for event %d, "
- "reinit hardware\n", dev->cmd_err, mr_event);
- (void) stu300_init_hw(dev);
- }
- return -EIO;
- }
-
- return 0;
-}
-
-/*
- * Waits for the busy bit to go low by repeated polling.
- */
-#define BUSY_RELEASE_ATTEMPTS 10
-static int stu300_wait_while_busy(struct stu300_dev *dev)
-{
- unsigned long timeout;
- int i;
-
- for (i = 0; i < BUSY_RELEASE_ATTEMPTS; i++) {
- timeout = jiffies + STU300_TIMEOUT;
-
- while (!time_after(jiffies, timeout)) {
- /* Is not busy? */
- if ((stu300_r8(dev->virtbase + I2C_SR1) &
- I2C_SR1_BUSY_IND) == 0)
- return 0;
- msleep(1);
- }
-
- dev_err(&dev->pdev->dev, "transaction timed out "
- "waiting for device to be free (not busy). "
- "Attempt: %d\n", i+1);
-
- dev_err(&dev->pdev->dev, "base address = "
- "0x%p, reinit hardware\n", dev->virtbase);
-
- (void) stu300_init_hw(dev);
- }
-
- dev_err(&dev->pdev->dev, "giving up after %d attempts "
- "to reset the bus.\n", BUSY_RELEASE_ATTEMPTS);
-
- return -ETIMEDOUT;
-}
-
-struct stu300_clkset {
- unsigned long rate;
- u32 setting;
-};
-
-static const struct stu300_clkset stu300_clktable[] = {
- { 0, 0xFFU },
- { 2500000, I2C_OAR2_FR_25_10MHZ },
- { 10000000, I2C_OAR2_FR_10_1667MHZ },
- { 16670000, I2C_OAR2_FR_1667_2667MHZ },
- { 26670000, I2C_OAR2_FR_2667_40MHZ },
- { 40000000, I2C_OAR2_FR_40_5333MHZ },
- { 53330000, I2C_OAR2_FR_5333_66MHZ },
- { 66000000, I2C_OAR2_FR_66_80MHZ },
- { 80000000, I2C_OAR2_FR_80_100MHZ },
- { 100000000, 0xFFU },
-};
-
-
-static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
-{
-
- u32 val;
- int i = 0;
-
- /* Locate the appropriate clock setting */
- while (i < ARRAY_SIZE(stu300_clktable) - 1 &&
- stu300_clktable[i].rate < clkrate)
- i++;
-
- if (stu300_clktable[i].setting == 0xFFU) {
- dev_err(&dev->pdev->dev, "too %s clock rate requested "
- "(%lu Hz).\n", i ? "high" : "low", clkrate);
- return -EINVAL;
- }
-
- stu300_wr8(stu300_clktable[i].setting,
- dev->virtbase + I2C_OAR2);
-
- dev_dbg(&dev->pdev->dev, "Clock rate %lu Hz, I2C bus speed %d Hz "
- "virtbase %p\n", clkrate, dev->speed, dev->virtbase);
-
- if (dev->speed > I2C_MAX_STANDARD_MODE_FREQ)
- /* Fast Mode I2C */
- val = ((clkrate/dev->speed) - 9)/3 + 1;
- else
- /* Standard Mode I2C */
- val = ((clkrate/dev->speed) - 7)/2 + 1;
-
- /* According to spec the divider must be > 2 */
- if (val < 0x002) {
- dev_err(&dev->pdev->dev, "too low clock rate (%lu Hz).\n",
- clkrate);
- return -EINVAL;
- }
-
- /* We have 12 bits clock divider only! */
- if (val & 0xFFFFF000U) {
- dev_err(&dev->pdev->dev, "too high clock rate (%lu Hz).\n",
- clkrate);
- return -EINVAL;
- }
-
- if (dev->speed > I2C_MAX_STANDARD_MODE_FREQ) {
- /* CC6..CC0 */
- stu300_wr8((val & I2C_CCR_CC_MASK) | I2C_CCR_FMSM,
- dev->virtbase + I2C_CCR);
- dev_dbg(&dev->pdev->dev, "set clock divider to 0x%08x, "
- "Fast Mode I2C\n", val);
- } else {
- /* CC6..CC0 */
- stu300_wr8((val & I2C_CCR_CC_MASK),
- dev->virtbase + I2C_CCR);
- dev_dbg(&dev->pdev->dev, "set clock divider to "
- "0x%08x, Standard Mode I2C\n", val);
- }
-
- /* CC11..CC7 */
- stu300_wr8(((val >> 7) & 0x1F),
- dev->virtbase + I2C_ECCR);
-
- return 0;
-}
-
-
-static int stu300_init_hw(struct stu300_dev *dev)
-{
- u32 dummy;
- unsigned long clkrate;
- int ret;
-
- /* Disable controller */
- stu300_wr8(0x00, dev->virtbase + I2C_CR);
- /*
- * Set own address to some default value (0x00).
- * We do not support slave mode anyway.
- */
- stu300_wr8(0x00, dev->virtbase + I2C_OAR1);
- /*
- * The I2C controller only operates properly in 26 MHz but we
- * program this driver as if we didn't know. This will also set the two
- * high bits of the own address to zero as well.
- * There is no known hardware issue with running in 13 MHz
- * However, speeds over 200 kHz are not used.
- */
- clkrate = clk_get_rate(dev->clk);
- ret = stu300_set_clk(dev, clkrate);
-
- if (ret)
- return ret;
- /*
- * Enable block, do it TWICE (hardware glitch)
- * Setting bit 7 can enable DDC mode. (Not used currently.)
- */
- stu300_wr8(I2C_CR_PERIPHERAL_ENABLE,
- dev->virtbase + I2C_CR);
- stu300_wr8(I2C_CR_PERIPHERAL_ENABLE,
- dev->virtbase + I2C_CR);
- /* Make a dummy read of the status register SR1 & SR2 */
- dummy = stu300_r8(dev->virtbase + I2C_SR2);
- dummy = stu300_r8(dev->virtbase + I2C_SR1);
-
- return 0;
-}
-
-
-
-/* Send slave address. */
-static int stu300_send_address(struct stu300_dev *dev,
- struct i2c_msg *msg, int resend)
-{
- u32 val;
- int ret;
-
- if (msg->flags & I2C_M_TEN) {
- /* This is probably how 10 bit addresses look */
- val = (0xf0 | (((u32) msg->addr & 0x300) >> 7)) &
- I2C_DR_D_MASK;
- if (msg->flags & I2C_M_RD)
- /* This is the direction bit */
- val |= 0x01;
- } else {
- val = i2c_8bit_addr_from_msg(msg);
- }
-
- if (resend) {
- if (msg->flags & I2C_M_RD)
- dev_dbg(&dev->pdev->dev, "read resend\n");
- else
- dev_dbg(&dev->pdev->dev, "write resend\n");
- }
-
- stu300_wr8(val, dev->virtbase + I2C_DR);
-
- /* For 10bit addressing, await 10bit request (EVENT 9) */
- if (msg->flags & I2C_M_TEN) {
- ret = stu300_await_event(dev, STU300_EVENT_9);
- /*
- * The slave device wants a 10bit address, send the rest
- * of the bits (the LSBits)
- */
- val = msg->addr & I2C_DR_D_MASK;
- /* This clears "event 9" */
- stu300_wr8(val, dev->virtbase + I2C_DR);
- if (ret != 0)
- return ret;
- }
- /* FIXME: Why no else here? two events for 10bit?
- * Await event 6 (normal) or event 9 (10bit)
- */
-
- if (resend)
- dev_dbg(&dev->pdev->dev, "await event 6\n");
- ret = stu300_await_event(dev, STU300_EVENT_6);
-
- /*
- * Clear any pending EVENT 6 no matter what happened during
- * await_event.
- */
- val = stu300_r8(dev->virtbase + I2C_CR);
- val |= I2C_CR_PERIPHERAL_ENABLE;
- stu300_wr8(val, dev->virtbase + I2C_CR);
-
- return ret;
-}
-
-static int stu300_xfer_msg(struct i2c_adapter *adap,
- struct i2c_msg *msg, int stop)
-{
- u32 cr;
- u32 val;
- u32 i;
- int ret;
- int attempts = 0;
- struct stu300_dev *dev = i2c_get_adapdata(adap);
-
- clk_enable(dev->clk);
-
- /* Remove this if (0) to trace each and every message. */
- if (0) {
- dev_dbg(&dev->pdev->dev, "I2C message to: 0x%04x, len: %d, "
- "flags: 0x%04x, stop: %d\n",
- msg->addr, msg->len, msg->flags, stop);
- }
-
- /*
- * For some reason, sending the address sometimes fails when running
- * on the 13 MHz clock. No interrupt arrives. This is a work around,
- * which tries to restart and send the address up to 10 times before
- * really giving up. Usually 5 to 8 attempts are enough.
- */
- do {
- if (attempts)
- dev_dbg(&dev->pdev->dev, "wait while busy\n");
- /* Check that the bus is free, or wait until some timeout */
- ret = stu300_wait_while_busy(dev);
- if (ret != 0)
- goto exit_disable;
-
- if (attempts)
- dev_dbg(&dev->pdev->dev, "re-int hw\n");
- /*
- * According to ST, there is no problem if the clock is
- * changed between 13 and 26 MHz during a transfer.
- */
- ret = stu300_init_hw(dev);
- if (ret)
- goto exit_disable;
-
- /* Send a start condition */
- cr = I2C_CR_PERIPHERAL_ENABLE;
- /* Setting the START bit puts the block in master mode */
- if (!(msg->flags & I2C_M_NOSTART))
- cr |= I2C_CR_START_ENABLE;
- if ((msg->flags & I2C_M_RD) && (msg->len > 1))
- /* On read more than 1 byte, we need ack. */
- cr |= I2C_CR_ACK_ENABLE;
- /* Check that it gets through */
- if (!(msg->flags & I2C_M_NOSTART)) {
- if (attempts)
- dev_dbg(&dev->pdev->dev, "send start event\n");
- ret = stu300_start_and_await_event(dev, cr,
- STU300_EVENT_5);
- }
-
- if (attempts)
- dev_dbg(&dev->pdev->dev, "send address\n");
-
- if (ret == 0)
- /* Send address */
- ret = stu300_send_address(dev, msg, attempts != 0);
-
- if (ret != 0) {
- attempts++;
- dev_dbg(&dev->pdev->dev, "failed sending address, "
- "retrying. Attempt: %d msg_index: %d/%d\n",
- attempts, dev->msg_index, dev->msg_len);
- }
-
- } while (ret != 0 && attempts < NUM_ADDR_RESEND_ATTEMPTS);
-
- if (attempts < NUM_ADDR_RESEND_ATTEMPTS && attempts > 0) {
- dev_dbg(&dev->pdev->dev, "managed to get address "
- "through after %d attempts\n", attempts);
- } else if (attempts == NUM_ADDR_RESEND_ATTEMPTS) {
- dev_dbg(&dev->pdev->dev, "I give up, tried %d times "
- "to resend address.\n",
- NUM_ADDR_RESEND_ATTEMPTS);
- goto exit_disable;
- }
-
-
- if (msg->flags & I2C_M_RD) {
- /* READ: we read the actual bytes one at a time */
- for (i = 0; i < msg->len; i++) {
- if (i == msg->len-1) {
- /*
- * Disable ACK and set STOP condition before
- * reading last byte
- */
- val = I2C_CR_PERIPHERAL_ENABLE;
-
- if (stop)
- val |= I2C_CR_STOP_ENABLE;
-
- stu300_wr8(val,
- dev->virtbase + I2C_CR);
- }
- /* Wait for this byte... */
- ret = stu300_await_event(dev, STU300_EVENT_7);
- if (ret != 0)
- goto exit_disable;
- /* This clears event 7 */
- msg->buf[i] = (u8) stu300_r8(dev->virtbase + I2C_DR);
- }
- } else {
- /* WRITE: we send the actual bytes one at a time */
- for (i = 0; i < msg->len; i++) {
- /* Write the byte */
- stu300_wr8(msg->buf[i],
- dev->virtbase + I2C_DR);
- /* Check status */
- ret = stu300_await_event(dev, STU300_EVENT_8);
- /* Next write to DR will clear event 8 */
- if (ret != 0) {
- dev_err(&dev->pdev->dev, "error awaiting "
- "event 8 (%d)\n", ret);
- goto exit_disable;
- }
- }
- /* Check NAK */
- if (!(msg->flags & I2C_M_IGNORE_NAK)) {
- if (stu300_r8(dev->virtbase + I2C_SR2) &
- I2C_SR2_AF_IND) {
- dev_err(&dev->pdev->dev, "I2C payload "
- "send returned NAK!\n");
- ret = -EIO;
- goto exit_disable;
- }
- }
- if (stop) {
- /* Send stop condition */
- val = I2C_CR_PERIPHERAL_ENABLE;
- val |= I2C_CR_STOP_ENABLE;
- stu300_wr8(val, dev->virtbase + I2C_CR);
- }
- }
-
- /* Check that the bus is free, or wait until some timeout occurs */
- ret = stu300_wait_while_busy(dev);
- if (ret != 0) {
- dev_err(&dev->pdev->dev, "timeout waiting for transfer "
- "to commence.\n");
- goto exit_disable;
- }
-
- /* Dummy read status registers */
- val = stu300_r8(dev->virtbase + I2C_SR2);
- val = stu300_r8(dev->virtbase + I2C_SR1);
- ret = 0;
-
- exit_disable:
- /* Disable controller */
- stu300_wr8(0x00, dev->virtbase + I2C_CR);
- clk_disable(dev->clk);
- return ret;
-}
-
-static int stu300_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
- int num)
-{
- int ret = -1;
- int i;
-
- struct stu300_dev *dev = i2c_get_adapdata(adap);
- dev->msg_len = num;
-
- for (i = 0; i < num; i++) {
- /*
- * Another driver appears to send stop for each message,
- * here we only do that for the last message. Possibly some
- * peripherals require this behaviour, then their drivers
- * have to send single messages in order to get "stop" for
- * each message.
- */
- dev->msg_index = i;
-
- ret = stu300_xfer_msg(adap, &msgs[i], (i == (num - 1)));
-
- if (ret != 0) {
- num = ret;
- break;
- }
- }
-
- return num;
-}
-
-static int stu300_xfer_todo(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
-{
- /* TODO: implement polling for this case if need be. */
- WARN(1, "%s: atomic transfers not implemented\n", dev_name(&adap->dev));
- return -EOPNOTSUPP;
-}
-
-static u32 stu300_func(struct i2c_adapter *adap)
-{
- /* This is the simplest thing you can think of... */
- return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR;
-}
-
-static const struct i2c_algorithm stu300_algo = {
- .master_xfer = stu300_xfer,
- .master_xfer_atomic = stu300_xfer_todo,
- .functionality = stu300_func,
-};
-
-static const struct i2c_adapter_quirks stu300_quirks = {
- .flags = I2C_AQ_NO_ZERO_LEN,
-};
-
-static int stu300_probe(struct platform_device *pdev)
-{
- struct stu300_dev *dev;
- struct i2c_adapter *adap;
- int bus_nr;
- int ret = 0;
-
- dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
-
- bus_nr = pdev->id;
- dev->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(dev->clk)) {
- dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
- return PTR_ERR(dev->clk);
- }
-
- dev->pdev = pdev;
- dev->virtbase = devm_platform_ioremap_resource(pdev, 0);
- dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual "
- "base %p\n", bus_nr, dev->virtbase);
- if (IS_ERR(dev->virtbase))
- return PTR_ERR(dev->virtbase);
-
- dev->irq = platform_get_irq(pdev, 0);
- ret = devm_request_irq(&pdev->dev, dev->irq, stu300_irh, 0, NAME, dev);
- if (ret < 0)
- return ret;
-
- dev->speed = scl_frequency;
-
- clk_prepare_enable(dev->clk);
- ret = stu300_init_hw(dev);
- clk_disable(dev->clk);
- if (ret != 0) {
- dev_err(&dev->pdev->dev, "error initializing hardware.\n");
- return -EIO;
- }
-
- /* IRQ event handling initialization */
- spin_lock_init(&dev->cmd_issue_lock);
- dev->cmd_event = STU300_EVENT_NONE;
- dev->cmd_err = STU300_ERROR_NONE;
-
- adap = &dev->adapter;
- adap->owner = THIS_MODULE;
- /* DDC class but actually often used for more generic I2C */
- adap->class = I2C_CLASS_DEPRECATED;
- strlcpy(adap->name, "ST Microelectronics DDC I2C adapter",
- sizeof(adap->name));
- adap->nr = bus_nr;
- adap->algo = &stu300_algo;
- adap->dev.parent = &pdev->dev;
- adap->dev.of_node = pdev->dev.of_node;
- adap->quirks = &stu300_quirks;
-
- i2c_set_adapdata(adap, dev);
-
- /* i2c device drivers may be active on return from add_adapter() */
- ret = i2c_add_numbered_adapter(adap);
- if (ret)
- return ret;
-
- platform_set_drvdata(pdev, dev);
- dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n",
- dev->virtbase, dev->irq);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int stu300_suspend(struct device *device)
-{
- struct stu300_dev *dev = dev_get_drvdata(device);
-
- /* Turn off everything */
- stu300_wr8(0x00, dev->virtbase + I2C_CR);
- return 0;
-}
-
-static int stu300_resume(struct device *device)
-{
- int ret = 0;
- struct stu300_dev *dev = dev_get_drvdata(device);
-
- clk_enable(dev->clk);
- ret = stu300_init_hw(dev);
- clk_disable(dev->clk);
-
- if (ret != 0)
- dev_err(device, "error re-initializing hardware.\n");
- return ret;
-}
-
-static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume);
-#define STU300_I2C_PM (&stu300_pm)
-#else
-#define STU300_I2C_PM NULL
-#endif
-
-static int stu300_remove(struct platform_device *pdev)
-{
- struct stu300_dev *dev = platform_get_drvdata(pdev);
-
- i2c_del_adapter(&dev->adapter);
- /* Turn off everything */
- stu300_wr8(0x00, dev->virtbase + I2C_CR);
- return 0;
-}
-
-static const struct of_device_id stu300_dt_match[] = {
- { .compatible = "st,ddci2c" },
- {},
-};
-MODULE_DEVICE_TABLE(of, stu300_dt_match);
-
-static struct platform_driver stu300_i2c_driver = {
- .driver = {
- .name = NAME,
- .pm = STU300_I2C_PM,
- .of_match_table = stu300_dt_match,
- },
- .probe = stu300_probe,
- .remove = stu300_remove,
-
-};
-
-static int __init stu300_init(void)
-{
- return platform_driver_register(&stu300_i2c_driver);
-}
-
-static void __exit stu300_exit(void)
-{
- platform_driver_unregister(&stu300_i2c_driver);
-}
-
-/*
- * The systems using this bus often have very basic devices such
- * as regulators on the I2C bus, so this needs to be loaded early.
- * Therefore it is registered in the subsys_initcall().
- */
-subsys_initcall(stu300_init);
-module_exit(stu300_exit);
-
-MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-MODULE_DESCRIPTION("ST Micro DDC I2C adapter (" NAME ")");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" NAME);