summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
authorWolfram Sang <wsa+renesas@sang-engineering.com>2015-12-17 15:32:36 +0300
committerWolfram Sang <wsa@the-dreams.de>2015-12-17 22:36:39 +0300
commit54177ccfbe95fcf250a89508a705bfe4706e3b86 (patch)
tree395c72bd98b11a6feee4390d13772d1a48aeb776 /drivers/i2c
parentb7d518e6f4c6d8a0b66effe3bda22417b7dc1e04 (diff)
downloadlinux-54177ccfbe95fcf250a89508a705bfe4706e3b86.tar.xz
i2c: make i2c_parse_fw_timings() always visible
This function used to be DT only, so it lived inside a CONFIG_OF block. Now it uses device attributes and must be moved outside of it. No further code changes, only one whitespace improvement. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/i2c-core.c104
1 files changed, 52 insertions, 52 deletions
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index b34c412bd2c2..7349b00f4101 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1439,58 +1439,6 @@ static void of_i2c_register_devices(struct i2c_adapter *adap)
}
}
-/**
- * i2c_parse_fw_timings - get I2C related timing parameters from firmware
- * @dev: The device to scan for I2C timing properties
- * @t: the i2c_timings struct to be filled with values
- * @use_defaults: bool to use sane defaults derived from the I2C specification
- * when properties are not found, otherwise use 0
- *
- * Scan the device for the generic I2C properties describing timing parameters
- * for the signal and fill the given struct with the results. If a property was
- * not found and use_defaults was true, then maximum timings are assumed which
- * are derived from the I2C specification. If use_defaults is not used, the
- * results will be 0, so drivers can apply their own defaults later. The latter
- * is mainly intended for avoiding regressions of existing drivers which want
- * to switch to this function. New drivers almost always should use the defaults.
- */
-
-void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
-{
- int ret;
-
- memset(t, 0, sizeof(*t));
-
- ret = device_property_read_u32(dev, "clock-frequency", &t->bus_freq_hz);
- if (ret && use_defaults)
- t->bus_freq_hz = 100000;
-
- ret = device_property_read_u32(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns);
- if (ret && use_defaults) {
- if (t->bus_freq_hz <= 100000)
- t->scl_rise_ns = 1000;
- else if (t->bus_freq_hz <= 400000)
- t->scl_rise_ns = 300;
- else
- t->scl_rise_ns = 120;
- }
-
- ret = device_property_read_u32(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns);
- if (ret && use_defaults) {
- if (t->bus_freq_hz <= 400000)
- t->scl_fall_ns = 300;
- else
- t->scl_fall_ns = 120;
- }
-
- device_property_read_u32(dev, "i2c-scl-internal-delay-ns", &t->scl_int_delay_ns);
-
- ret = device_property_read_u32(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns);
- if (ret && use_defaults)
- t->sda_fall_ns = t->scl_fall_ns;
-}
-EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
-
static int of_dev_node_match(struct device *dev, void *data)
{
return dev->of_node == data;
@@ -1892,6 +1840,58 @@ void i2c_del_adapter(struct i2c_adapter *adap)
}
EXPORT_SYMBOL(i2c_del_adapter);
+/**
+ * i2c_parse_fw_timings - get I2C related timing parameters from firmware
+ * @dev: The device to scan for I2C timing properties
+ * @t: the i2c_timings struct to be filled with values
+ * @use_defaults: bool to use sane defaults derived from the I2C specification
+ * when properties are not found, otherwise use 0
+ *
+ * Scan the device for the generic I2C properties describing timing parameters
+ * for the signal and fill the given struct with the results. If a property was
+ * not found and use_defaults was true, then maximum timings are assumed which
+ * are derived from the I2C specification. If use_defaults is not used, the
+ * results will be 0, so drivers can apply their own defaults later. The latter
+ * is mainly intended for avoiding regressions of existing drivers which want
+ * to switch to this function. New drivers almost always should use the defaults.
+ */
+
+void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
+{
+ int ret;
+
+ memset(t, 0, sizeof(*t));
+
+ ret = device_property_read_u32(dev, "clock-frequency", &t->bus_freq_hz);
+ if (ret && use_defaults)
+ t->bus_freq_hz = 100000;
+
+ ret = device_property_read_u32(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns);
+ if (ret && use_defaults) {
+ if (t->bus_freq_hz <= 100000)
+ t->scl_rise_ns = 1000;
+ else if (t->bus_freq_hz <= 400000)
+ t->scl_rise_ns = 300;
+ else
+ t->scl_rise_ns = 120;
+ }
+
+ ret = device_property_read_u32(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns);
+ if (ret && use_defaults) {
+ if (t->bus_freq_hz <= 400000)
+ t->scl_fall_ns = 300;
+ else
+ t->scl_fall_ns = 120;
+ }
+
+ device_property_read_u32(dev, "i2c-scl-internal-delay-ns", &t->scl_int_delay_ns);
+
+ ret = device_property_read_u32(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns);
+ if (ret && use_defaults)
+ t->sda_fall_ns = t->scl_fall_ns;
+}
+EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
+
/* ------------------------------------------------------------------------- */
int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *))