summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
authorSifan Naeem <sifan.naeem@imgtec.com>2015-11-19 12:35:16 +0300
committerWolfram Sang <wsa@the-dreams.de>2016-01-03 00:04:55 +0300
commitc7b0a7c10752fa9a30f719848f4350fa02fdb8e5 (patch)
treea0929f4745a86e54d5a5fb2daaadb981db6d60ad /drivers/i2c
parentdd29207e6ccf6ae705dc01c6db73f3a8cb641400 (diff)
downloadlinux-c7b0a7c10752fa9a30f719848f4350fa02fdb8e5.tar.xz
i2c: img-scb: add handle for Master halt interrupt
Master halt is issued after each byte of a transaction is processed in IP version 3.3. Master halt will stall the bus by holding the SCK line low until the halt bit in the scb_general_control is cleared. After the last byte of a transfer is processed we can use the Master Halt interrupt to facilitate a repeated start transfer without issuing a stop bit. Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-img-scb.c17
1 files changed, 14 insertions, 3 deletions
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index f416010a0b49..991118f837be 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -151,6 +151,7 @@
#define INT_FIFO_EMPTYING BIT(12)
#define INT_TRANSACTION_DONE BIT(15)
#define INT_SLAVE_EVENT BIT(16)
+#define INT_MASTER_HALTED BIT(17)
#define INT_TIMING BIT(18)
#define INT_STOP_DETECTED BIT(19)
@@ -177,6 +178,7 @@
INT_FIFO_FULL | \
INT_FIFO_FILLING | \
INT_FIFO_EMPTY | \
+ INT_MASTER_HALTED | \
INT_STOP_DETECTED)
#define INT_ENABLE_MASK_WAITSTOP (INT_SLAVE_EVENT | \
@@ -875,18 +877,27 @@ static unsigned int img_i2c_auto(struct img_i2c *i2c,
}
if (i2c->msg.flags & I2C_M_RD) {
- if (int_status & INT_FIFO_FULL_FILLING) {
+ if (int_status & (INT_FIFO_FULL_FILLING | INT_MASTER_HALTED)) {
img_i2c_read_fifo(i2c);
if (i2c->msg.len == 0)
return ISR_WAITSTOP;
}
} else {
- if (int_status & INT_FIFO_EMPTY) {
- if (i2c->msg.len == 0)
+ if (int_status & (INT_FIFO_EMPTY | INT_MASTER_HALTED)) {
+ if ((int_status & INT_FIFO_EMPTY) &&
+ i2c->msg.len == 0)
return ISR_WAITSTOP;
img_i2c_write_fifo(i2c);
}
}
+ if (int_status & INT_MASTER_HALTED) {
+ /*
+ * Release and then enable transaction halt, to
+ * allow only a single byte to proceed.
+ */
+ img_i2c_transaction_halt(i2c, false);
+ img_i2c_transaction_halt(i2c, !i2c->last_msg);
+ }
return 0;
}