Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
 "Here is the large set of char/misc and other small driver subsystem
  changes for 6.1-rc1. Loads of different things in here:

   - IIO driver updates, additions, and changes. Probably the largest
     part of the diffstat

   - habanalabs driver update with support for new hardware and
     features, the second largest part of the diff.

   - fpga subsystem driver updates and additions

   - mhi subsystem updates

   - Coresight driver updates

   - gnss subsystem updates

   - extcon driver updates

   - icc subsystem updates

   - fsi subsystem updates

   - nvmem subsystem and driver updates

   - misc driver updates

   - speakup driver additions for new features

   - lots of tiny driver updates and cleanups

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
  w1: Split memcpy() of struct cn_msg flexible array
  spmi: pmic-arb: increase SPMI transaction timeout delay
  spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
  spmi: pmic-arb: correct duplicate APID to PPID mapping logic
  spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
  spmi: pmic-arb: check apid against limits before calling irq handler
  spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
  spmi: pmic-arb: handle spurious interrupt
  spmi: pmic-arb: add a print in cleanup_irq
  drivers: spmi: Directly use ida_alloc()/free()
  MAINTAINERS: add TI ECAP driver info
  counter: ti-ecap-capture: capture driver support for ECAP
  Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
  dt-bindings: counter: add ti,am62-ecap-capture.yaml
  counter: Introduce the COUNTER_COMP_ARRAY component type
  counter: Consolidate Counter extension sysfs attribute creation
  counter: Introduce the Count capture component
  counter: 104-quad-8: Add Signal polarity component
  counter: Introduce the Signal polarity component
  counter: interrupt-cnt: Implement watch_validate callback
  ...

1 files changed, 31 insertions, 16 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7fe5930891e0..791612ca6012 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -653,6 +653,20 @@ config MAX1118
 	  To compile this driver as a module, choose M here: the module will be
 	  called max1118.
 
+config MAX11205
+	tristate "Maxim max11205 ADC driver"
+	depends on SPI
+	select AD_SIGMA_DELTA
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+	help
+	  Say yes here to build support for Maxim max11205 16-bit, single-channel
+	  ultra-low power delta-sigma ADC.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called max11205.
+
 config MAX1241
 	tristate "Maxim max1241 ADC driver"
 	depends on SPI_MASTER
@@ -718,6 +732,8 @@ config MCP3422
 config MCP3911
 	tristate "Microchip Technology MCP3911 driver"
 	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Microchip Technology's MCP3911
 	  analog to digital converter.
@@ -919,6 +935,21 @@ config ROCKCHIP_SARADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called rockchip_saradc.
 
+config RICHTEK_RTQ6056
+	tristate "Richtek RTQ6056 Current and Power Monitor ADC"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to enable RQT6056 ADC support.
+	  RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+	  compatible interface, and the device provides full information for
+	  system by reading out the load current and power.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called rtq6056.
+
 config RZG2L_ADC
 	tristate "Renesas RZ/G2L ADC driver"
 	depends on ARCH_RZG2L || COMPILE_TEST
@@ -1022,22 +1053,6 @@ config STMPE_ADC
 	  Say yes here to build support for ST Microelectronics STMPE
 	  built-in ADC block (stmpe811).
 
-config STX104
-	tristate "Apex Embedded Systems STX104 driver"
-	depends on PC104 && X86
-	select ISA_BUS_API
-	select GPIOLIB
-	help
-	  Say yes here to build support for the Apex Embedded Systems STX104
-	  integrated analog PC/104 card.
-
-	  This driver supports the 16 channels of single-ended (8 channels of
-	  differential) analog inputs, 2 channels of analog output, 4 digital
-	  inputs, and 4 digital outputs provided by the STX104.
-
-	  The base port addresses for the devices may be configured via the base
-	  array module parameter.
-
 config SUN4I_GPADC
 	tristate "Support for the Allwinner SoCs GPADC"
 	depends on IIO