summaryrefslogtreecommitdiff
path: root/drivers/iio/common
diff options
context:
space:
mode:
authorLorenzo Bianconi <lorenzo.bianconi83@gmail.com>2017-08-29 14:45:11 +0300
committerJonathan Cameron <Jonathan.Cameron@huawei.com>2017-09-03 19:39:39 +0300
commitc65e3d6ef4bfdc4c8460509f08507cf7dc026974 (patch)
treedc3f17d3e73e265983a2a31d8f138d90852de95d /drivers/iio/common
parent3af75db12e3d3537bc01c06bbdc876cb17e82b35 (diff)
downloadlinux-c65e3d6ef4bfdc4c8460509f08507cf7dc026974.tar.xz
iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL
Data-ready line in LIS3MDL is routed to drdy pin and it is not possible to select a different INT pin. st_sensors_set_dataready_irq() assumes that if drdy int address is not exported in register map, irq trigger is not supported by the sensor and hw_irq_trigger is always false. Based on this configuration st_sensors_irq_thread does not consume generated interrupt causing an unhandled irq. Fix this taking into account status register address in st_sensors_set_dataready_irq() Fixes: 90efe0556292 (iio: st_sensors: harden interrupt handling) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio/common')
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c11
1 files changed, 10 insertions, 1 deletions
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index d99bb1460fe2..02e833b14db0 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -463,8 +463,17 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
u8 drdy_mask;
struct st_sensor_data *sdata = iio_priv(indio_dev);
- if (!sdata->sensor_settings->drdy_irq.addr)
+ if (!sdata->sensor_settings->drdy_irq.addr) {
+ /*
+ * there are some devices (e.g. LIS3MDL) where drdy line is
+ * routed to a given pin and it is not possible to select a
+ * different one. Take into account irq status register
+ * to understand if irq trigger can be properly supported
+ */
+ if (sdata->sensor_settings->drdy_irq.addr_stat_drdy)
+ sdata->hw_irq_trigger = enable;
return 0;
+ }
/* Enable/Disable the interrupt generator 1. */
if (sdata->sensor_settings->drdy_irq.ig1.en_addr > 0) {