diff options
author | Li peiyu <579lpy@gmail.com> | 2023-12-11 15:29:40 +0300 |
---|---|---|
committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2023-12-11 22:38:36 +0300 |
commit | c9180b8e39befcc703940873ac49e0603ef42bf7 (patch) | |
tree | 4fd0d4e3de3b35fe3c461113d82bb89ac43dfd70 /drivers/iio/humidity/hdc3020.c | |
parent | a4887e9782959e3e8f756412b53808157803de60 (diff) | |
download | linux-c9180b8e39befcc703940873ac49e0603ef42bf7.tar.xz |
iio: humidity: Add driver for ti HDC302x humidity sensors
Add support for HDC302x integrated capacitive based relative
humidity (RH) and temperature sensor.
This driver supports reading values, reading the maximum and
minimum of values and controlling the integrated heater of
the sensor.
Co-developed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Li peiyu <579lpy@gmail.com>
Link: https://lore.kernel.org/r/20231211122940.9791-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio/humidity/hdc3020.c')
-rw-r--r-- | drivers/iio/humidity/hdc3020.c | 473 |
1 files changed, 473 insertions, 0 deletions
diff --git a/drivers/iio/humidity/hdc3020.c b/drivers/iio/humidity/hdc3020.c new file mode 100644 index 000000000000..4e3311170725 --- /dev/null +++ b/drivers/iio/humidity/hdc3020.c @@ -0,0 +1,473 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * hdc3020.c - Support for the TI HDC3020,HDC3021 and HDC3022 + * temperature + relative humidity sensors + * + * Copyright (C) 2023 + * + * Datasheet: https://www.ti.com/lit/ds/symlink/hdc3020.pdf + */ + +#include <linux/bitops.h> +#include <linux/cleanup.h> +#include <linux/crc8.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mutex.h> + +#include <asm/unaligned.h> + +#include <linux/iio/iio.h> + +#define HDC3020_HEATER_CMD_MSB 0x30 /* shared by all heater commands */ +#define HDC3020_HEATER_ENABLE 0x6D +#define HDC3020_HEATER_DISABLE 0x66 +#define HDC3020_HEATER_CONFIG 0x6E + +#define HDC3020_READ_RETRY_TIMES 10 +#define HDC3020_BUSY_DELAY_MS 10 + +#define HDC3020_CRC8_POLYNOMIAL 0x31 + +static const u8 HDC3020_S_AUTO_10HZ_MOD0[2] = { 0x27, 0x37 }; + +static const u8 HDC3020_EXIT_AUTO[2] = { 0x30, 0x93 }; + +static const u8 HDC3020_R_T_RH_AUTO[2] = { 0xE0, 0x00 }; +static const u8 HDC3020_R_T_LOW_AUTO[2] = { 0xE0, 0x02 }; +static const u8 HDC3020_R_T_HIGH_AUTO[2] = { 0xE0, 0x03 }; +static const u8 HDC3020_R_RH_LOW_AUTO[2] = { 0xE0, 0x04 }; +static const u8 HDC3020_R_RH_HIGH_AUTO[2] = { 0xE0, 0x05 }; + +struct hdc3020_data { + struct i2c_client *client; + /* + * Ensure that the sensor configuration (currently only heater is + * supported) will not be changed during the process of reading + * sensor data (this driver will try HDC3020_READ_RETRY_TIMES times + * if the device does not respond). + */ + struct mutex lock; +}; + +static const int hdc3020_heater_vals[] = {0, 1, 0x3FFF}; + +static const struct iio_chan_spec hdc3020_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_PEAK) | + BIT(IIO_CHAN_INFO_TROUGH) | BIT(IIO_CHAN_INFO_OFFSET), + }, + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_PEAK) | + BIT(IIO_CHAN_INFO_TROUGH), + }, + { + /* + * For setting the internal heater, which can be switched on to + * prevent or remove any condensation that may develop when the + * ambient environment approaches its dew point temperature. + */ + .type = IIO_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW), + .output = 1, + }, +}; + +DECLARE_CRC8_TABLE(hdc3020_crc8_table); + +static int hdc3020_write_bytes(struct hdc3020_data *data, const u8 *buf, u8 len) +{ + struct i2c_client *client = data->client; + struct i2c_msg msg; + int ret, cnt; + + msg.addr = client->addr; + msg.flags = 0; + msg.buf = (char *)buf; + msg.len = len; + + /* + * During the measurement process, HDC3020 will not return data. + * So wait for a while and try again + */ + for (cnt = 0; cnt < HDC3020_READ_RETRY_TIMES; cnt++) { + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret == 1) + return 0; + + mdelay(HDC3020_BUSY_DELAY_MS); + } + dev_err(&client->dev, "Could not write sensor command\n"); + + return -ETIMEDOUT; +} + +static int hdc3020_read_bytes(struct hdc3020_data *data, const u8 *buf, + void *val, int len) +{ + int ret, cnt; + struct i2c_client *client = data->client; + struct i2c_msg msg[2] = { + [0] = { + .addr = client->addr, + .flags = 0, + .buf = (char *)buf, + .len = 2, + }, + [1] = { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = val, + .len = len, + }, + }; + + /* + * During the measurement process, HDC3020 will not return data. + * So wait for a while and try again + */ + for (cnt = 0; cnt < HDC3020_READ_RETRY_TIMES; cnt++) { + ret = i2c_transfer(client->adapter, msg, 2); + if (ret == 2) + return 0; + + mdelay(HDC3020_BUSY_DELAY_MS); + } + dev_err(&client->dev, "Could not read sensor data\n"); + + return -ETIMEDOUT; +} + +static int hdc3020_read_measurement(struct hdc3020_data *data, + enum iio_chan_type type, int *val) +{ + u8 crc, buf[6]; + int ret; + + ret = hdc3020_read_bytes(data, HDC3020_R_T_RH_AUTO, buf, 6); + if (ret < 0) + return ret; + + /* CRC check of the temperature measurement */ + crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); + if (crc != buf[2]) + return -EINVAL; + + /* CRC check of the relative humidity measurement */ + crc = crc8(hdc3020_crc8_table, buf + 3, 2, CRC8_INIT_VALUE); + if (crc != buf[5]) + return -EINVAL; + + if (type == IIO_TEMP) + *val = get_unaligned_be16(buf); + else if (type == IIO_HUMIDITYRELATIVE) + *val = get_unaligned_be16(&buf[3]); + else + return -EINVAL; + + return 0; +} + +/* + * After exiting the automatic measurement mode or resetting, the peak + * value will be reset to the default value + * This method is used to get the highest temp measured during automatic + * measurement + */ +static int hdc3020_read_high_peak_t(struct hdc3020_data *data, int *val) +{ + u8 crc, buf[3]; + int ret; + + ret = hdc3020_read_bytes(data, HDC3020_R_T_HIGH_AUTO, buf, 3); + if (ret < 0) + return ret; + + crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); + if (crc != buf[2]) + return -EINVAL; + + *val = get_unaligned_be16(buf); + + return 0; +} + +/* + * This method is used to get the lowest temp measured during automatic + * measurement + */ +static int hdc3020_read_low_peak_t(struct hdc3020_data *data, int *val) +{ + u8 crc, buf[3]; + int ret; + + ret = hdc3020_read_bytes(data, HDC3020_R_T_LOW_AUTO, buf, 3); + if (ret < 0) + return ret; + + crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); + if (crc != buf[2]) + return -EINVAL; + + *val = get_unaligned_be16(buf); + + return 0; +} + +/* + * This method is used to get the highest humidity measured during automatic + * measurement + */ +static int hdc3020_read_high_peak_rh(struct hdc3020_data *data, int *val) +{ + u8 crc, buf[3]; + int ret; + + ret = hdc3020_read_bytes(data, HDC3020_R_RH_HIGH_AUTO, buf, 3); + if (ret < 0) + return ret; + + crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); + if (crc != buf[2]) + return -EINVAL; + + *val = get_unaligned_be16(buf); + + return 0; +} + +/* + * This method is used to get the lowest humidity measured during automatic + * measurement + */ +static int hdc3020_read_low_peak_rh(struct hdc3020_data *data, int *val) +{ + u8 crc, buf[3]; + int ret; + + ret = hdc3020_read_bytes(data, HDC3020_R_RH_LOW_AUTO, buf, 3); + if (ret < 0) + return ret; + + crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); + if (crc != buf[2]) + return -EINVAL; + + *val = get_unaligned_be16(buf); + + return 0; +} + +static int hdc3020_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct hdc3020_data *data = iio_priv(indio_dev); + int ret; + + if (chan->type != IIO_TEMP && chan->type != IIO_HUMIDITYRELATIVE) + return -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: { + guard(mutex)(&data->lock); + ret = hdc3020_read_measurement(data, chan->type, val); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + } + case IIO_CHAN_INFO_PEAK: { + guard(mutex)(&data->lock); + if (chan->type == IIO_TEMP) { + ret = hdc3020_read_high_peak_t(data, val); + if (ret < 0) + return ret; + } else { + ret = hdc3020_read_high_peak_rh(data, val); + if (ret < 0) + return ret; + } + return IIO_VAL_INT; + } + case IIO_CHAN_INFO_TROUGH: { + guard(mutex)(&data->lock); + if (chan->type == IIO_TEMP) { + ret = hdc3020_read_low_peak_t(data, val); + if (ret < 0) + return ret; + } else { + ret = hdc3020_read_low_peak_rh(data, val); + if (ret < 0) + return ret; + } + return IIO_VAL_INT; + } + case IIO_CHAN_INFO_SCALE: + *val2 = 65536; + if (chan->type == IIO_TEMP) + *val = 175; + else + *val = 100; + return IIO_VAL_FRACTIONAL; + + case IIO_CHAN_INFO_OFFSET: + if (chan->type != IIO_TEMP) + return -EINVAL; + + *val = 16852; + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int hdc3020_read_available(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, + int *type, int *length, long mask) +{ + if (mask != IIO_CHAN_INFO_RAW || chan->type != IIO_CURRENT) + return -EINVAL; + + *vals = hdc3020_heater_vals; + *type = IIO_VAL_INT; + + return IIO_AVAIL_RANGE; +} + +static int hdc3020_update_heater(struct hdc3020_data *data, int val) +{ + u8 buf[5]; + int ret; + + if (val < hdc3020_heater_vals[0] || val > hdc3020_heater_vals[2]) + return -EINVAL; + + buf[0] = HDC3020_HEATER_CMD_MSB; + + if (!val) { + buf[1] = HDC3020_HEATER_DISABLE; + return hdc3020_write_bytes(data, buf, 2); + } + + buf[1] = HDC3020_HEATER_CONFIG; + put_unaligned_be16(val & GENMASK(13, 0), &buf[2]); + buf[4] = crc8(hdc3020_crc8_table, buf + 2, 2, CRC8_INIT_VALUE); + ret = hdc3020_write_bytes(data, buf, 5); + if (ret < 0) + return ret; + + buf[1] = HDC3020_HEATER_ENABLE; + + return hdc3020_write_bytes(data, buf, 2); +} + +static int hdc3020_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct hdc3020_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (chan->type != IIO_CURRENT) + return -EINVAL; + + guard(mutex)(&data->lock); + return hdc3020_update_heater(data, val); + } + + return -EINVAL; +} + +static const struct iio_info hdc3020_info = { + .read_raw = hdc3020_read_raw, + .write_raw = hdc3020_write_raw, + .read_avail = hdc3020_read_available, +}; + +static void hdc3020_stop(void *data) +{ + hdc3020_write_bytes((struct hdc3020_data *)data, HDC3020_EXIT_AUTO, 2); +} + +static int hdc3020_probe(struct i2c_client *client) +{ + struct iio_dev *indio_dev; + struct hdc3020_data *data; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + mutex_init(&data->lock); + + crc8_populate_msb(hdc3020_crc8_table, HDC3020_CRC8_POLYNOMIAL); + + indio_dev->name = "hdc3020"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &hdc3020_info; + indio_dev->channels = hdc3020_channels; + indio_dev->num_channels = ARRAY_SIZE(hdc3020_channels); + + ret = hdc3020_write_bytes(data, HDC3020_S_AUTO_10HZ_MOD0, 2); + if (ret) + return dev_err_probe(&client->dev, ret, + "Unable to set up measurement\n"); + + ret = devm_add_action_or_reset(&data->client->dev, hdc3020_stop, data); + if (ret) + return ret; + + ret = devm_iio_device_register(&data->client->dev, indio_dev); + if (ret) + return dev_err_probe(&client->dev, ret, "Failed to add device"); + + return 0; +} + +static const struct i2c_device_id hdc3020_id[] = { + { "hdc3020" }, + { "hdc3021" }, + { "hdc3022" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, hdc3020_id); + +static const struct of_device_id hdc3020_dt_ids[] = { + { .compatible = "ti,hdc3020" }, + { .compatible = "ti,hdc3021" }, + { .compatible = "ti,hdc3022" }, + { } +}; +MODULE_DEVICE_TABLE(of, hdc3020_dt_ids); + +static struct i2c_driver hdc3020_driver = { + .driver = { + .name = "hdc3020", + .of_match_table = hdc3020_dt_ids, + }, + .probe = hdc3020_probe, + .id_table = hdc3020_id, +}; +module_i2c_driver(hdc3020_driver); + +MODULE_AUTHOR("Javier Carrasco <javier.carrasco.cruz@gmail.com>"); +MODULE_AUTHOR("Li peiyu <579lpy@gmail.com>"); +MODULE_DESCRIPTION("TI HDC3020 humidity and temperature sensor driver"); +MODULE_LICENSE("GPL"); |