summaryrefslogtreecommitdiff
path: root/drivers/iio/imu
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-06-08 08:26:20 +0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-06-08 08:26:20 +0300
commit03cce00b4b0d70885c7a63ef17713b8cc2b1c8bd (patch)
tree3c3ee72c19adcd3f4e96fed26c657d7c49b8680c /drivers/iio/imu
parentaf8c34ce6ae32addda3788d54a7e340cad22516b (diff)
parent94bef000f1d4aa111f4ddda1482cf3b30ad069ce (diff)
downloadlinux-03cce00b4b0d70885c7a63ef17713b8cc2b1c8bd.tar.xz
Merge tag 'iio-fixes-for-4.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes: First round of iio fixes for the 4.7 cycle. A slightly bumper set due to travel delaying the pull request and a fair few issues with the recent merge window patches. Patches all over the place. The st-sensors one is probably the most involved, but definitly solves the issues seen. Note there are some other issues around that handler (and the fact that a lot of boards tie a level interrupt chip to an edge interrupt only irq chip). These are not regressions however, so will turn up the slow route. * core - iio_trigger_attach_pollfunc had some really badly wrong error handling. Another nasty triggered whilst chasing down issues with the st sensors rework below. * ad5592r - fix an off by one error when allocating channels. * am2315 - a stray mutex unlock before we ever take the lock. * apds9960 - missing a parent in the driver model (which should be the i2c device). Result is it doesn't turn up under /sys/bus/i2c/devices which some userspace code uses for repeatable device identification. * as3935 - ABI usage bug which meant a processed value was reported as raw. Now reporting scale as well to ensure userspace has the info it needs. - Don't return processed value via the buffer - it doesn't conform to the ABI and will overflow in some cases. - Fix a wrongly sized buffer which would overflow trashing part of the stack. Also move it onto the heap as part of the fix. * bh1780 - a missing return after write in debugfs lead to an incorrect read and a null pointer dereference. - dereferencing the wrong pointer in suspend and resume leading to unpredictable results. - assign a static name to avoid accidentally ending up with no name if loaded via device tree. * bmi160 - output data rate for the accelerometer was incorrectly reported. Fix it. - writing the output data rate was also wrong due to reverse parameters. * bmp280 - error message for wrong chip ID gave the wrong expected value. * hdc100x - mask for writing the integration time was wrong allowin g us to get 'stuck' in a particular value with no way back. - temperature reported in celsius rather than millicelsius as per the ABI. - Get rid of some incorrect data shifting which lead to readings being rather incorrect. * max44000 - drop scale attribute for proximity as it is an unscaled value (depends on what is in range rather than anything knowable at the detector). * st-pressure - ABI compliance fixes - units were wrong. * st-sensors - We introduced some nasty issues with the recent switch over to a a somewhat threaded handler in that we broke using a software trigger with these devices. Now do it properly. It's a larger patch than ideal for a fix, but the logic is straight forward. - Make sure the trigger is initialized before requesting the interrupt. This matters now the interrupt can be shared. Before it was ugly and wrong but short of flakey hardware could not be triggered. - Hammer down the dataready pin at boot - otherwise with really unlucky timing things could get interestingly wedged requiring a hard power down of the chip.
Diffstat (limited to 'drivers/iio/imu')
-rw-r--r--drivers/iio/imu/bmi160/bmi160_core.c16
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
index 0bf92b06d7d8..b8a290ec984e 100644
--- a/drivers/iio/imu/bmi160/bmi160_core.c
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -209,11 +209,11 @@ static const struct bmi160_scale_item bmi160_scale_table[] = {
};
static const struct bmi160_odr bmi160_accel_odr[] = {
- {0x01, 0, 78125},
- {0x02, 1, 5625},
- {0x03, 3, 125},
- {0x04, 6, 25},
- {0x05, 12, 5},
+ {0x01, 0, 781250},
+ {0x02, 1, 562500},
+ {0x03, 3, 125000},
+ {0x04, 6, 250000},
+ {0x05, 12, 500000},
{0x06, 25, 0},
{0x07, 50, 0},
{0x08, 100, 0},
@@ -229,7 +229,7 @@ static const struct bmi160_odr bmi160_gyro_odr[] = {
{0x08, 100, 0},
{0x09, 200, 0},
{0x0A, 400, 0},
- {0x0B, 8000, 0},
+ {0x0B, 800, 0},
{0x0C, 1600, 0},
{0x0D, 3200, 0},
};
@@ -364,8 +364,8 @@ int bmi160_set_odr(struct bmi160_data *data, enum bmi160_sensor_type t,
return regmap_update_bits(data->regmap,
bmi160_regs[t].config,
- bmi160_odr_table[t].tbl[i].bits,
- bmi160_regs[t].config_odr_mask);
+ bmi160_regs[t].config_odr_mask,
+ bmi160_odr_table[t].tbl[i].bits);
}
static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t,