summaryrefslogtreecommitdiff
path: root/drivers/iio/imu
diff options
context:
space:
mode:
authorLee Jones <lee.jones@linaro.org>2020-07-17 19:55:32 +0300
committerJonathan Cameron <Jonathan.Cameron@huawei.com>2020-07-20 11:03:30 +0300
commitecf8d08fa26cf86cf84924c30592eb31451083fc (patch)
treef5ac3af1bbdd6cdea75d035e39b2e86bf46e0247 /drivers/iio/imu
parent315482a52208da03cee1e7767bbc830faa77e8d3 (diff)
downloadlinux-ecf8d08fa26cf86cf84924c30592eb31451083fc.tar.xz
iio: imu: inv_mpu6050: inv_mpu_core: Demote obvious misuse of kerneldoc to standard comment blocks
No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:444: warning: Function parameter or member 'st' not described in 'inv_mpu6050_set_lpf_regs' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:444: warning: Function parameter or member 'val' not described in 'inv_mpu6050_set_lpf_regs' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:480: warning: Function parameter or member 'indio_dev' not described in 'inv_mpu6050_init_config' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:862: warning: Function parameter or member 'st' not described in 'inv_mpu6050_set_lpf' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:862: warning: Function parameter or member 'rate' not described in 'inv_mpu6050_set_lpf' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'dev' not described in 'inv_mpu6050_fifo_rate_store' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'attr' not described in 'inv_mpu6050_fifo_rate_store' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'buf' not described in 'inv_mpu6050_fifo_rate_store' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'count' not described in 'inv_mpu6050_fifo_rate_store' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'dev' not described in 'inv_fifo_rate_show' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'attr' not described in 'inv_fifo_rate_show' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'buf' not described in 'inv_fifo_rate_show' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'dev' not described in 'inv_attr_show' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'attr' not described in 'inv_attr_show' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'buf' not described in 'inv_attr_show' drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:1282: warning: Function parameter or member 'st' not described in 'inv_check_and_setup_chip' Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio/imu')
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_core.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 153f855db8d6..3fee3947f772 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -433,7 +433,7 @@ static int inv_mpu6050_set_gyro_fsr(struct inv_mpu6050_state *st,
return regmap_write(st->map, st->reg->gyro_config, data);
}
-/**
+/*
* inv_mpu6050_set_lpf_regs() - set low pass filter registers, chip dependent
*
* MPU60xx/MPU9150 use only 1 register for accelerometer + gyroscope
@@ -467,7 +467,7 @@ static int inv_mpu6050_set_lpf_regs(struct inv_mpu6050_state *st,
return regmap_write(st->map, st->reg->accel_lpf, val);
}
-/**
+/*
* inv_mpu6050_init_config() - Initialize hardware, disable FIFO.
*
* Initial configuration:
@@ -847,7 +847,7 @@ error_write_raw_unlock:
return result;
}
-/**
+/*
* inv_mpu6050_set_lpf() - set low pass filer based on fifo rate.
*
* Based on the Nyquist principle, the bandwidth of the low
@@ -884,7 +884,7 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
return 0;
}
-/**
+/*
* inv_mpu6050_fifo_rate_store() - Set fifo rate.
*/
static ssize_t
@@ -945,7 +945,7 @@ fifo_rate_fail_unlock:
return count;
}
-/**
+/*
* inv_fifo_rate_show() - Get the current sampling rate.
*/
static ssize_t
@@ -962,7 +962,7 @@ inv_fifo_rate_show(struct device *dev, struct device_attribute *attr,
return scnprintf(buf, PAGE_SIZE, "%u\n", fifo_rate);
}
-/**
+/*
* inv_attr_show() - calling this function will show current
* parameters.
*
@@ -1275,7 +1275,7 @@ static const struct iio_info mpu_info = {
.debugfs_reg_access = &inv_mpu6050_reg_access,
};
-/**
+/*
* inv_check_and_setup_chip() - check and setup chip.
*/
static int inv_check_and_setup_chip(struct inv_mpu6050_state *st)