iio: pressure: bmp280: Add support for new sensor BMP580

Adds compatibility with the new sensor generation, the BMP580.

The measurement and initialization codepaths are adapted from
the device datasheet and the repository from manufacturer at
https://github.com/boschsensortec/BMP5-Sensor-API.

Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/f899fceec9b48bc173bd4b7555f0a237fa32d520.1676823250.git.ang.iglesiasg@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

1 files changed, 106 insertions, 1 deletions

diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index be17104ef0a2..cd4c5be36ed7 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -6,6 +6,107 @@
 #include <linux/regulator/consumer.h>
 
 
+/* BMP580 specific registers */
+#define BMP580_REG_CMD			0x7E
+#define BMP580_REG_EFF_OSR		0x38
+#define BMP580_REG_ODR_CONFIG		0x37
+#define BMP580_REG_OSR_CONFIG		0x36
+#define BMP580_REG_IF_CONFIG		0x13
+#define BMP580_REG_REV_ID		0x02
+#define BMP580_REG_CHIP_ID		0x01
+/* OOR allows to configure a pressure alarm */
+#define BMP580_REG_OOR_CONFIG		0x35
+#define BMP580_REG_OOR_RANGE		0x34
+#define BMP580_REG_OOR_THR_MSB		0x33
+#define BMP580_REG_OOR_THR_LSB		0x32
+/* DSP registers (IIR filters) */
+#define BMP580_REG_DSP_IIR		0x31
+#define BMP580_REG_DSP_CONFIG		0x30
+/* NVM access registers */
+#define BMP580_REG_NVM_DATA_MSB		0x2D
+#define BMP580_REG_NVM_DATA_LSB		0x2C
+#define BMP580_REG_NVM_ADDR		0x2B
+/* Status registers */
+#define BMP580_REG_STATUS		0x28
+#define BMP580_REG_INT_STATUS		0x27
+#define BMP580_REG_CHIP_STATUS		0x11
+/* Data registers */
+#define BMP580_REG_FIFO_DATA		0x29
+#define BMP580_REG_PRESS_MSB		0x22
+#define BMP580_REG_PRESS_LSB		0x21
+#define BMP580_REG_PRESS_XLSB		0x20
+#define BMP580_REG_TEMP_MSB		0x1F
+#define BMP580_REG_TEMP_LSB		0x1E
+#define BMP580_REG_TEMP_XLSB		0x1D
+/* FIFO config registers */
+#define BMP580_REG_FIFO_SEL		0x18
+#define BMP580_REG_FIFO_COUNT		0x17
+#define BMP580_REG_FIFO_CONFIG		0x16
+/* Interruptions config registers */
+#define BMP580_REG_INT_SOURCE		0x15
+#define BMP580_REG_INT_CONFIG		0x14
+
+#define BMP580_CMD_NOOP			0x00
+#define BMP580_CMD_EXTMODE_SEQ_0	0x73
+#define BMP580_CMD_EXTMODE_SEQ_1	0xB4
+#define BMP580_CMD_EXTMODE_SEQ_2	0x69
+#define BMP580_CMD_NVM_OP_SEQ_0		0x5D
+#define BMP580_CMD_NVM_READ_SEQ_1	0xA5
+#define BMP580_CMD_NVM_WRITE_SEQ_1	0xA0
+#define BMP580_CMD_SOFT_RESET		0xB6
+
+#define BMP580_INT_STATUS_POR_MASK	BIT(4)
+
+#define BMP580_STATUS_CORE_RDY_MASK	BIT(0)
+#define BMP580_STATUS_NVM_RDY_MASK	BIT(1)
+#define BMP580_STATUS_NVM_ERR_MASK	BIT(2)
+#define BMP580_STATUS_NVM_CMD_ERR_MASK	BIT(3)
+
+#define BMP580_OSR_PRESS_MASK		GENMASK(5, 3)
+#define BMP580_OSR_TEMP_MASK		GENMASK(2, 0)
+#define BMP580_OSR_PRESS_EN		BIT(6)
+#define BMP580_EFF_OSR_PRESS_MASK	GENMASK(5, 3)
+#define BMP580_EFF_OSR_TEMP_MASK	GENMASK(2, 0)
+#define BMP580_EFF_OSR_VALID_ODR	BIT(7)
+
+#define BMP580_ODR_MASK			GENMASK(6, 2)
+#define BMP580_MODE_MASK		GENMASK(1, 0)
+#define BMP580_MODE_SLEEP		0
+#define BMP580_MODE_NORMAL		1
+#define BMP580_MODE_FORCED		2
+#define BMP580_MODE_CONTINOUS		3
+#define BMP580_ODR_DEEPSLEEP_DIS	BIT(7)
+
+#define BMP580_DSP_COMP_MASK		GENMASK(1, 0)
+#define BMP580_DSP_COMP_DIS		0
+#define BMP580_DSP_TEMP_COMP_EN		1
+/*
+ * In section 7.27 of datasheet, modes 2 and 3 are technically the same.
+ * Pressure compensation means also enabling temperature compensation
+ */
+#define BMP580_DSP_PRESS_COMP_EN	2
+#define BMP580_DSP_PRESS_TEMP_COMP_EN	3
+#define BMP580_DSP_IIR_FORCED_FLUSH	BIT(2)
+#define BMP580_DSP_SHDW_IIR_TEMP_EN	BIT(3)
+#define BMP580_DSP_FIFO_IIR_TEMP_EN	BIT(4)
+#define BMP580_DSP_SHDW_IIR_PRESS_EN	BIT(5)
+#define BMP580_DSP_FIFO_IIR_PRESS_EN	BIT(6)
+#define BMP580_DSP_OOR_IIR_PRESS_EN	BIT(7)
+
+#define BMP580_DSP_IIR_PRESS_MASK	GENMASK(5, 3)
+#define BMP580_DSP_IIR_TEMP_MASK	GENMASK(2, 0)
+#define BMP580_FILTER_OFF		0
+#define BMP580_FILTER_1X		1
+#define BMP580_FILTER_3X		2
+#define BMP580_FILTER_7X		3
+#define BMP580_FILTER_15X		4
+#define BMP580_FILTER_31X		5
+#define BMP580_FILTER_63X		6
+#define BMP580_FILTER_127X		7
+
+#define BMP580_TEMP_SKIPPED		0x7f7f7f
+#define BMP580_PRESS_SKIPPED		0x7f7f7f
+
 /* BMP380 specific registers */
 #define BMP380_REG_CMD			0x7E
 #define BMP380_REG_CONFIG		0x1F
@@ -184,6 +285,8 @@
 #define BMP280_REG_ID			0xD0
 
 #define BMP380_CHIP_ID			0x50
+#define BMP580_CHIP_ID			0x50
+#define BMP580_CHIP_ID_ALT		0x51
 #define BMP180_CHIP_ID			0x55
 #define BMP280_CHIP_ID			0x58
 #define BME280_CHIP_ID			0x60
@@ -341,7 +444,7 @@ struct bmp280_chip_info {
 	int sampling_freq_default;
 
 	int (*chip_config)(struct bmp280_data *);
-	int (*read_temp)(struct bmp280_data *, int *);
+	int (*read_temp)(struct bmp280_data *, int *, int *);
 	int (*read_press)(struct bmp280_data *, int *, int *);
 	int (*read_humid)(struct bmp280_data *, int *, int *);
 	int (*read_calib)(struct bmp280_data *);
@@ -353,11 +456,13 @@ extern const struct bmp280_chip_info bmp180_chip_info;
 extern const struct bmp280_chip_info bmp280_chip_info;
 extern const struct bmp280_chip_info bme280_chip_info;
 extern const struct bmp280_chip_info bmp380_chip_info;
+extern const struct bmp280_chip_info bmp580_chip_info;
 
 /* Regmap configurations */
 extern const struct regmap_config bmp180_regmap_config;
 extern const struct regmap_config bmp280_regmap_config;
 extern const struct regmap_config bmp380_regmap_config;
+extern const struct regmap_config bmp580_regmap_config;
 
 /* Probe called from different transports */
 int bmp280_common_probe(struct device *dev,