summaryrefslogtreecommitdiff
path: root/drivers/iio
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2016-06-30 04:48:51 +0300
committerJonathan Cameron <jic23@kernel.org>2016-07-03 13:27:15 +0300
commitb26b4e91700ff45d033eeaac91597d6d479378a4 (patch)
tree3d71bd25de6154b155409b5b7637293e564769b2 /drivers/iio
parent17118843a563c681aaafb29621befba02f28c592 (diff)
downloadlinux-b26b4e91700ff45d033eeaac91597d6d479378a4.tar.xz
iio: pressure: bmp280: add SPI interface driver
This patch mimics the SPI functionality found in the misc driver in drivers/misc/bh085-spi.c to make it possible to reuse the existing BMP280/BMP180/BMP085 driver with all clients of the other driver. The adoption is straight-forward since like the other driver, it is a simple matter of using regmap. This driver is also so obviously inspired/copied from the old misc driver in drivers/misc/bmp085.c that I just took the liberty to add in the authors of the other drivers + self in the core driver file. The MISC driver also supports a variant named "BMP181" so include that here to be complete in comparison to the old driver. The bus mapping code for SPI was written by Akinobu Mita. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/pressure/Kconfig15
-rw-r--r--drivers/iio/pressure/Makefile1
-rw-r--r--drivers/iio/pressure/bmp280-core.c4
-rw-r--r--drivers/iio/pressure/bmp280-spi.c123
4 files changed, 140 insertions, 3 deletions
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 3d0d311acb1d..d130cdc78f43 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -7,17 +7,20 @@ menu "Pressure sensors"
config BMP280
tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver"
- depends on I2C
+ depends on (I2C || SPI_MASTER)
depends on !(BMP085_I2C=y || BMP085_I2C=m)
+ depends on !(BMP085_SPI=y || BMP085_SPI=m)
select REGMAP
select BMP280_I2C if (I2C)
+ select BMP280_SPI if (SPI_MASTER)
help
Say yes here to build support for Bosch Sensortec BMP180 and BMP280
pressure and temperature sensors. Also supports the BE280 with
an additional humidity sensor channel.
- To compile this driver as a module, choose M here: the modules
- will be called bmp280-i2c and bmp280.
+ To compile this driver as a module, choose M here: the core module
+ will be called bmp280 and you will also get bmp280-i2c for I2C
+ and/or bmp280-spi for SPI support.
config BMP280_I2C
tristate
@@ -25,6 +28,12 @@ config BMP280_I2C
depends on I2C
select REGMAP_I2C
+config BMP280_SPI
+ tristate
+ depends on BMP280
+ depends on SPI_MASTER
+ select REGMAP
+
config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB
select IIO_BUFFER
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index 736f4305fe46..7f395bed5e88 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_BMP280) += bmp280.o
bmp280-objs := bmp280-core.o bmp280-regmap.o
obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o
+obj-$(CONFIG_BMP280_SPI) += bmp280-spi.o
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
obj-$(CONFIG_HP03) += hp03.o
obj-$(CONFIG_MPL115) += mpl115.o
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index f1b5f8c0ac8c..43bd0b07619c 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -1,5 +1,9 @@
/*
+ * Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com>
+ * Copyright (c) 2012 Bosch Sensortec GmbH
+ * Copyright (c) 2012 Unixphere AB
* Copyright (c) 2014 Intel Corporation
+ * Copyright (c) 2016 Linus Walleij <linus.walleij@linaro.org>
*
* Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor.
*
diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c
new file mode 100644
index 000000000000..216e64b682bf
--- /dev/null
+++ b/drivers/iio/pressure/bmp280-spi.c
@@ -0,0 +1,123 @@
+/*
+ * SPI interface for the BMP280 driver
+ *
+ * Inspired by the older BMP085 driver drivers/misc/bmp085-spi.c
+ */
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include <linux/regmap.h>
+
+#include "bmp280.h"
+
+static int bmp280_regmap_spi_write(void *context, const void *data,
+ size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ u8 buf[2];
+
+ memcpy(buf, data, 2);
+ /*
+ * The SPI register address (= full register address without bit 7) and
+ * the write command (bit7 = RW = '0')
+ */
+ buf[0] &= ~0x80;
+
+ return spi_write_then_read(spi, buf, 2, NULL, 0);
+}
+
+static int bmp280_regmap_spi_read(void *context, const void *reg,
+ size_t reg_size, void *val, size_t val_size)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+
+ return spi_write_then_read(spi, reg, reg_size, val, val_size);
+}
+
+static struct regmap_bus bmp280_regmap_bus = {
+ .write = bmp280_regmap_spi_write,
+ .read = bmp280_regmap_spi_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_BIG,
+ .val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static int bmp280_spi_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct regmap *regmap;
+ const struct regmap_config *regmap_config;
+ int ret;
+
+ spi->bits_per_word = 8;
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&spi->dev, "spi_setup failed!\n");
+ return ret;
+ }
+
+ switch (id->driver_data) {
+ case BMP180_CHIP_ID:
+ regmap_config = &bmp180_regmap_config;
+ break;
+ case BMP280_CHIP_ID:
+ case BME280_CHIP_ID:
+ regmap_config = &bmp280_regmap_config;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap = devm_regmap_init(&spi->dev,
+ &bmp280_regmap_bus,
+ &spi->dev,
+ regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "failed to allocate register map\n");
+ return PTR_ERR(regmap);
+ }
+
+ return bmp280_common_probe(&spi->dev,
+ regmap,
+ id->driver_data,
+ id->name);
+}
+
+static int bmp280_spi_remove(struct spi_device *spi)
+{
+ return bmp280_common_remove(&spi->dev);
+}
+
+static const struct of_device_id bmp280_of_spi_match[] = {
+ { .compatible = "bosch,bmp085", },
+ { .compatible = "bosch,bmp180", },
+ { .compatible = "bosch,bmp181", },
+ { .compatible = "bosch,bmp280", },
+ { .compatible = "bosch,bme280", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
+
+static const struct spi_device_id bmp280_spi_id[] = {
+ { "bmp180", BMP180_CHIP_ID },
+ { "bmp181", BMP180_CHIP_ID },
+ { "bmp280", BMP280_CHIP_ID },
+ { "bme280", BME280_CHIP_ID },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, bmp280_spi_id);
+
+static struct spi_driver bmp280_spi_driver = {
+ .driver = {
+ .name = "bmp280",
+ .of_match_table = bmp280_of_spi_match,
+ },
+ .id_table = bmp280_spi_id,
+ .probe = bmp280_spi_probe,
+ .remove = bmp280_spi_remove,
+};
+module_spi_driver(bmp280_spi_driver);
+
+MODULE_DESCRIPTION("BMP280 SPI bus driver");
+MODULE_LICENSE("GPL");