Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - updates to Ilitech driver to support ILI2117

 - face lift of st1232 driver to support MT-B protocol

 - a new driver for i.MX system controller keys

 - mpr121 driver now supports polling mode

 - various input drivers have been switched away from input_polled_dev
   to use polled mode of regular input devices

 - other assorted cleanups and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits)
  Input: synaptics-rmi4 - fix various V4L2 compliance problems in F54
  Input: synaptics - switch another X1 Carbon 6 to RMI/SMbus
  Input: fix Kconfig indentation
  Input: imx_sc_key - correct SCU message structure to avoid stack corruption
  Input: ili210x - optionally show calibrate sysfs attribute
  Input: ili210x - add resolution to chip operations structure
  Input: ili210x - do not retrieve/print chip firmware version
  Input: mms114 - use device_get_match_data
  Input: ili210x - remove unneeded suspend and resume handlers
  Input: ili210x - do not unconditionally mark touchscreen as wakeup source
  Input: ili210x - define and use chip operations structure
  Input: ili210x - do not set parent device explicitly
  Input: ili210x - handle errors from input_mt_init_slots()
  Input: ili210x - switch to using threaded IRQ
  Input: ili210x - add ILI2117 support
  dt-bindings: input: touchscreen: ad7879: generic node names in example
  Input: ar1021 - fix typo in preprocessor macro name
  Input: synaptics-rmi4 - simplify data read in rmi_f54_work
  Input: kxtj9 - switch to using polled mode of input devices
  Input: kxtj9 - switch to using managed resources
  ...

1 files changed, 17 insertions, 11 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 8911bc2ec42a..61f4eb63eec1 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -16,7 +16,6 @@ if INPUT_KEYBOARD
 config KEYBOARD_ADC
 	tristate "ADC Ladder Buttons"
 	depends on IIO
-	select INPUT_POLLDEV
 	help
 	  This driver implements support for buttons connected
 	  to an ADC using a resistor ladder.
@@ -168,14 +167,14 @@ config KEYBOARD_QT1050
 	  the module will be called qt1050
 
 config KEYBOARD_QT1070
-       tristate "Atmel AT42QT1070 Touch Sensor Chip"
-       depends on I2C
-       help
-         Say Y here if you want to use Atmel AT42QT1070 QTouch
-         Sensor chip as input device.
+	tristate "Atmel AT42QT1070 Touch Sensor Chip"
+	depends on I2C
+	help
+	  Say Y here if you want to use Atmel AT42QT1070 QTouch
+	  Sensor chip as input device.
 
-         To compile this driver as a module, choose M here:
-         the module will be called qt1070
+	  To compile this driver as a module, choose M here:
+	  the module will be called qt1070
 
 config KEYBOARD_QT2160
 	tristate "Atmel AT42QT2160 Touch Sensor Chip"
@@ -191,7 +190,6 @@ config KEYBOARD_CLPS711X
 	tristate "CLPS711X Keypad support"
 	depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST)
 	select INPUT_MATRIXKMAP
-	select INPUT_POLLDEV
 	help
 	  Say Y here to enable the matrix keypad on the Cirrus Logic
 	  CLPS711X CPUs.
@@ -250,7 +248,6 @@ config KEYBOARD_GPIO
 config KEYBOARD_GPIO_POLLED
 	tristate "Polled GPIO buttons"
 	depends on GPIOLIB
-	select INPUT_POLLDEV
 	help
 	  This driver implements support for buttons connected
 	  to GPIO pins that are not capable of generating interrupts.
@@ -342,7 +339,6 @@ config KEYBOARD_HIL
 config KEYBOARD_HP6XX
 	tristate "HP Jornada 6xx keyboard"
 	depends on SH_HP6XX
-	select INPUT_POLLDEV
 	help
 	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
 	  support the built-in keyboard.
@@ -469,6 +465,16 @@ config KEYBOARD_IMX
 	  To compile this driver as a module, choose M here: the
 	  module will be called imx_keypad.
 
+config KEYBOARD_IMX_SC_KEY
+	tristate "IMX SCU Key Driver"
+	depends on IMX_SCU
+	help
+	  This is the system controller key driver for NXP i.MX SoCs with
+	  system controller inside.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx_sc_key.
+
 config KEYBOARD_NEWTON
 	tristate "Newton keyboard"
 	select SERIO