summaryrefslogtreecommitdiff
path: root/drivers/input
diff options
context:
space:
mode:
authorMichał Mirosław <mirq-linux@rere.qmqm.pl>2021-01-25 01:28:01 +0300
committerDmitry Torokhov <dmitry.torokhov@gmail.com>2021-01-25 05:20:53 +0300
commit9517b95bdc4699d94c2ffc6a520bb0ccec396f5b (patch)
treee71b4afc5b9bfcf6e3b793ef6aca387fefe36a05 /drivers/input
parent6965eece2a89c3f1d00881c6052ee1e987870c08 (diff)
downloadlinux-9517b95bdc4699d94c2ffc6a520bb0ccec396f5b.tar.xz
Input: elants_i2c - add support for eKTF3624
Add ELAN KTF3624 touchscreen support to the elants_i2c driver. The eKTF3624 TS is found on a series of ASUS Transformer tablet devices, Nexus 7 tablet and etc. The firmware interface of eKTF3624 is nearly identical to eKTH3500, which is already supported by the driver. The minor differences of the firmware interface are now handled by the driver. The eKTF3624 support was tested on ASUS Transformer TF700T, TF300T and Nexus 7 tablets. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210124195414.27333-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/touchscreen/elants_i2c.c152
1 files changed, 135 insertions, 17 deletions
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index d51cb910fba1..6f57ec579f00 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -56,6 +56,7 @@
#define QUEUE_HEADER_SINGLE 0x62
#define QUEUE_HEADER_NORMAL 0X63
#define QUEUE_HEADER_WAIT 0x64
+#define QUEUE_HEADER_NORMAL2 0x66
/* Command header definition */
#define CMD_HEADER_WRITE 0x54
@@ -69,6 +70,7 @@
#define CMD_HEADER_REK 0x66
/* FW position data */
+#define PACKET_SIZE_OLD 40
#define PACKET_SIZE 55
#define MAX_CONTACT_NUM 10
#define FW_POS_HEADER 0
@@ -90,6 +92,8 @@
/* FW read command, 0x53 0x?? 0x0, 0x01 */
#define E_ELAN_INFO_FW_VER 0x00
#define E_ELAN_INFO_BC_VER 0x10
+#define E_ELAN_INFO_X_RES 0x60
+#define E_ELAN_INFO_Y_RES 0x63
#define E_ELAN_INFO_REK 0xD0
#define E_ELAN_INFO_TEST_VER 0xE0
#define E_ELAN_INFO_FW_ID 0xF0
@@ -112,6 +116,11 @@
#define ELAN_POWERON_DELAY_USEC 500
#define ELAN_RESET_DELAY_MSEC 20
+enum elants_chip_id {
+ EKTH3500,
+ EKTF3624,
+};
+
enum elants_state {
ELAN_STATE_NORMAL,
ELAN_WAIT_QUEUE_HEADER,
@@ -143,9 +152,12 @@ struct elants_data {
unsigned int y_res;
unsigned int x_max;
unsigned int y_max;
+ unsigned int phy_x;
+ unsigned int phy_y;
struct touchscreen_properties prop;
enum elants_state state;
+ enum elants_chip_id chip_id;
enum elants_iap_mode iap_mode;
/* Guards against concurrent access to the device via sysfs */
@@ -433,7 +445,51 @@ static int elants_i2c_query_bc_version(struct elants_data *ts)
return 0;
}
-static int elants_i2c_query_ts_info(struct elants_data *ts)
+static int elants_i2c_query_ts_info_ektf(struct elants_data *ts)
+{
+ struct i2c_client *client = ts->client;
+ int error;
+ u8 resp[4];
+ u16 phy_x, phy_y;
+ const u8 get_xres_cmd[] = {
+ CMD_HEADER_READ, E_ELAN_INFO_X_RES, 0x00, 0x00
+ };
+ const u8 get_yres_cmd[] = {
+ CMD_HEADER_READ, E_ELAN_INFO_Y_RES, 0x00, 0x00
+ };
+
+ /* Get X/Y size in mm */
+ error = elants_i2c_execute_command(client, get_xres_cmd,
+ sizeof(get_xres_cmd),
+ resp, sizeof(resp), 1,
+ "get X size");
+ if (error)
+ return error;
+
+ phy_x = resp[2] | ((resp[3] & 0xF0) << 4);
+
+ error = elants_i2c_execute_command(client, get_yres_cmd,
+ sizeof(get_yres_cmd),
+ resp, sizeof(resp), 1,
+ "get Y size");
+ if (error)
+ return error;
+
+ phy_y = resp[2] | ((resp[3] & 0xF0) << 4);
+
+ dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y);
+
+ ts->phy_x = phy_x;
+ ts->phy_y = phy_y;
+
+ /* eKTF doesn't report max size, set it to default values */
+ ts->x_max = 2240 - 1;
+ ts->y_max = 1408 - 1;
+
+ return 0;
+}
+
+static int elants_i2c_query_ts_info_ekth(struct elants_data *ts)
{
struct i2c_client *client = ts->client;
int error;
@@ -508,6 +564,8 @@ static int elants_i2c_query_ts_info(struct elants_data *ts)
ts->x_res = DIV_ROUND_CLOSEST(ts->x_max, phy_x);
ts->y_max = ELAN_TS_RESOLUTION(cols, osr);
ts->y_res = DIV_ROUND_CLOSEST(ts->y_max, phy_y);
+ ts->phy_x = phy_x;
+ ts->phy_y = phy_y;
}
return 0;
@@ -587,8 +645,20 @@ static int elants_i2c_initialize(struct elants_data *ts)
error = elants_i2c_query_fw_version(ts);
if (!error)
error = elants_i2c_query_test_version(ts);
- if (!error)
- error = elants_i2c_query_ts_info(ts);
+
+ switch (ts->chip_id) {
+ case EKTH3500:
+ if (!error)
+ error = elants_i2c_query_ts_info_ekth(ts);
+ break;
+ case EKTF3624:
+ if (!error)
+ error = elants_i2c_query_ts_info_ektf(ts);
+ break;
+ default:
+ unreachable();
+ break;
+ }
if (error)
ts->iap_mode = ELAN_IAP_RECOVERY;
@@ -853,7 +923,8 @@ out:
* Event reporting.
*/
-static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
+static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf,
+ size_t packet_size)
{
struct input_dev *input = ts->input;
unsigned int n_fingers;
@@ -880,8 +951,24 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
pos = &buf[FW_POS_XY + i * 3];
x = (((u16)pos[0] & 0xf0) << 4) | pos[1];
y = (((u16)pos[0] & 0x0f) << 8) | pos[2];
- p = buf[FW_POS_PRESSURE + i];
- w = buf[FW_POS_WIDTH + i];
+
+ /*
+ * eKTF3624 may have use "old" touch-report format,
+ * depending on a device and TS firmware version.
+ * For example, ASUS Transformer devices use the "old"
+ * format, while ASUS Nexus 7 uses the "new" formant.
+ */
+ if (packet_size == PACKET_SIZE_OLD &&
+ ts->chip_id == EKTF3624) {
+ w = buf[FW_POS_WIDTH + i / 2];
+ w >>= 4 * (~i & 1);
+ w |= w << 4;
+ w |= !w;
+ p = w;
+ } else {
+ p = buf[FW_POS_PRESSURE + i];
+ w = buf[FW_POS_WIDTH + i];
+ }
dev_dbg(&ts->client->dev, "i=%d x=%d y=%d p=%d w=%d\n",
i, x, y, p, w);
@@ -913,7 +1000,8 @@ static u8 elants_i2c_calculate_checksum(u8 *buf)
return checksum;
}
-static void elants_i2c_event(struct elants_data *ts, u8 *buf)
+static void elants_i2c_event(struct elants_data *ts, u8 *buf,
+ size_t packet_size)
{
u8 checksum = elants_i2c_calculate_checksum(buf);
@@ -927,7 +1015,7 @@ static void elants_i2c_event(struct elants_data *ts, u8 *buf)
"%s: unknown packet type: %02x\n",
__func__, buf[FW_POS_HEADER]);
else
- elants_i2c_mt_event(ts, buf);
+ elants_i2c_mt_event(ts, buf, packet_size);
}
static irqreturn_t elants_i2c_irq(int irq, void *_dev)
@@ -970,7 +1058,6 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev)
switch (ts->buf[FW_HDR_TYPE]) {
case CMD_HEADER_HELLO:
case CMD_HEADER_RESP:
- case CMD_HEADER_REK:
break;
case QUEUE_HEADER_WAIT:
@@ -985,9 +1072,24 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev)
break;
case QUEUE_HEADER_SINGLE:
- elants_i2c_event(ts, &ts->buf[HEADER_SIZE]);
+ elants_i2c_event(ts, &ts->buf[HEADER_SIZE],
+ ts->buf[FW_HDR_LENGTH]);
break;
+ case QUEUE_HEADER_NORMAL2: /* CMD_HEADER_REK */
+ /*
+ * Depending on firmware version, eKTF3624 touchscreens
+ * may utilize one of these opcodes for the touch events:
+ * 0x63 (NORMAL) and 0x66 (NORMAL2). The 0x63 is used by
+ * older firmware version and differs from 0x66 such that
+ * touch pressure value needs to be adjusted. The 0x66
+ * opcode of newer firmware is equal to 0x63 of eKTH3500.
+ */
+ if (ts->chip_id != EKTF3624)
+ break;
+
+ fallthrough;
+
case QUEUE_HEADER_NORMAL:
report_count = ts->buf[FW_HDR_COUNT];
if (report_count == 0 || report_count > 3) {
@@ -998,7 +1100,12 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev)
}
report_len = ts->buf[FW_HDR_LENGTH] / report_count;
- if (report_len != PACKET_SIZE) {
+
+ if (report_len == PACKET_SIZE_OLD &&
+ ts->chip_id == EKTF3624) {
+ dev_dbg_once(&client->dev,
+ "using old report format\n");
+ } else if (report_len != PACKET_SIZE) {
dev_err(&client->dev,
"mismatching report length: %*ph\n",
HEADER_SIZE, ts->buf);
@@ -1007,8 +1114,8 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev)
for (i = 0; i < report_count; i++) {
u8 *buf = ts->buf + HEADER_SIZE +
- i * PACKET_SIZE;
- elants_i2c_event(ts, buf);
+ i * report_len;
+ elants_i2c_event(ts, buf, report_len);
}
break;
@@ -1250,6 +1357,7 @@ static int elants_i2c_probe(struct i2c_client *client,
init_completion(&ts->cmd_done);
ts->client = client;
+ ts->chip_id = (enum elants_chip_id)id->driver_data;
i2c_set_clientdata(client, ts);
ts->vcc33 = devm_regulator_get(&client->dev, "vcc33");
@@ -1331,13 +1439,20 @@ static int elants_i2c_probe(struct i2c_client *client,
input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE,
0, MT_TOOL_PALM, 0, 0);
+
+ touchscreen_parse_properties(ts->input, true, &ts->prop);
+
+ if (ts->chip_id == EKTF3624) {
+ /* calculate resolution from size */
+ ts->x_res = DIV_ROUND_CLOSEST(ts->prop.max_x, ts->phy_x);
+ ts->y_res = DIV_ROUND_CLOSEST(ts->prop.max_y, ts->phy_y);
+ }
+
input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
if (ts->major_res > 0)
input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, ts->major_res);
- touchscreen_parse_properties(ts->input, true, &ts->prop);
-
error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM,
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
if (error) {
@@ -1466,14 +1581,16 @@ static SIMPLE_DEV_PM_OPS(elants_i2c_pm_ops,
elants_i2c_suspend, elants_i2c_resume);
static const struct i2c_device_id elants_i2c_id[] = {
- { DEVICE_NAME, 0 },
+ { DEVICE_NAME, EKTH3500 },
+ { "ekth3500", EKTH3500 },
+ { "ektf3624", EKTF3624 },
{ }
};
MODULE_DEVICE_TABLE(i2c, elants_i2c_id);
#ifdef CONFIG_ACPI
static const struct acpi_device_id elants_acpi_id[] = {
- { "ELAN0001", 0 },
+ { "ELAN0001", EKTH3500 },
{ }
};
MODULE_DEVICE_TABLE(acpi, elants_acpi_id);
@@ -1482,6 +1599,7 @@ MODULE_DEVICE_TABLE(acpi, elants_acpi_id);
#ifdef CONFIG_OF
static const struct of_device_id elants_of_match[] = {
{ .compatible = "elan,ekth3500" },
+ { .compatible = "elan,ektf3624" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, elants_of_match);