summaryrefslogtreecommitdiff
path: root/drivers/irqchip
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-10-24 20:33:08 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-10-24 20:33:08 +0300
commite731f3146ff3bba5424b40140e1a7e6f92e94964 (patch)
treec926040385de8b020763f0d2338e0ccbf42bac45 /drivers/irqchip
parent1f70935f637dfba226bf77182c2629fde61ed06e (diff)
parentaccdab6d9e8f715068d91ee0ca0424a6999f0d19 (diff)
downloadlinux-e731f3146ff3bba5424b40140e1a7e6f92e94964.tar.xz
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
Diffstat (limited to 'drivers/irqchip')
-rw-r--r--drivers/irqchip/Makefile1
-rw-r--r--drivers/irqchip/irq-s3c24xx.c1330
2 files changed, 0 insertions, 1331 deletions
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 80e3a84709ee..94c2885882ee 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_ARCH_LPC32XX) += irq-lpc32xx.o
obj-$(CONFIG_ARCH_MMP) += irq-mmp.o
obj-$(CONFIG_IRQ_MXS) += irq-mxs.o
obj-$(CONFIG_ARCH_TEGRA) += irq-tegra.o
-obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o
obj-$(CONFIG_CLPS711X_IRQCHIP) += irq-clps711x.o
obj-$(CONFIG_OMPIC) += irq-ompic.o
diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c
deleted file mode 100644
index d2031fecc386..000000000000
--- a/drivers/irqchip/irq-s3c24xx.c
+++ /dev/null
@@ -1,1330 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * S3C24XX IRQ handling
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
-*/
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/pm.h>
-
-#define S3C_IRQTYPE_NONE 0
-#define S3C_IRQTYPE_EINT 1
-#define S3C_IRQTYPE_EDGE 2
-#define S3C_IRQTYPE_LEVEL 3
-
-struct s3c_irq_data {
- unsigned int type;
- unsigned long offset;
- unsigned long parent_irq;
-
- /* data gets filled during init */
- struct s3c_irq_intc *intc;
- unsigned long sub_bits;
- struct s3c_irq_intc *sub_intc;
-};
-
-/*
- * Structure holding the controller data
- * @reg_pending register holding pending irqs
- * @reg_intpnd special register intpnd in main intc
- * @reg_mask mask register
- * @domain irq_domain of the controller
- * @parent parent controller for ext and sub irqs
- * @irqs irq-data, always s3c_irq_data[32]
- */
-struct s3c_irq_intc {
- void __iomem *reg_pending;
- void __iomem *reg_intpnd;
- void __iomem *reg_mask;
- struct irq_domain *domain;
- struct s3c_irq_intc *parent;
- struct s3c_irq_data *irqs;
-};
-
-/*
- * Array holding pointers to the global controller structs
- * [0] ... main_intc
- * [1] ... sub_intc
- * [2] ... main_intc2 on s3c2416
- */
-static struct s3c_irq_intc *s3c_intc[3];
-
-static void s3c_irq_mask(struct irq_data *data)
-{
- struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
- struct s3c_irq_intc *intc = irq_data->intc;
- struct s3c_irq_intc *parent_intc = intc->parent;
- struct s3c_irq_data *parent_data;
- unsigned long mask;
- unsigned int irqno;
-
- mask = readl_relaxed(intc->reg_mask);
- mask |= (1UL << irq_data->offset);
- writel_relaxed(mask, intc->reg_mask);
-
- if (parent_intc) {
- parent_data = &parent_intc->irqs[irq_data->parent_irq];
-
- /* check to see if we need to mask the parent IRQ
- * The parent_irq is always in main_intc, so the hwirq
- * for find_mapping does not need an offset in any case.
- */
- if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
- irqno = irq_find_mapping(parent_intc->domain,
- irq_data->parent_irq);
- s3c_irq_mask(irq_get_irq_data(irqno));
- }
- }
-}
-
-static void s3c_irq_unmask(struct irq_data *data)
-{
- struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
- struct s3c_irq_intc *intc = irq_data->intc;
- struct s3c_irq_intc *parent_intc = intc->parent;
- unsigned long mask;
- unsigned int irqno;
-
- mask = readl_relaxed(intc->reg_mask);
- mask &= ~(1UL << irq_data->offset);
- writel_relaxed(mask, intc->reg_mask);
-
- if (parent_intc) {
- irqno = irq_find_mapping(parent_intc->domain,
- irq_data->parent_irq);
- s3c_irq_unmask(irq_get_irq_data(irqno));
- }
-}
-
-static inline void s3c_irq_ack(struct irq_data *data)
-{
- struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
- struct s3c_irq_intc *intc = irq_data->intc;
- unsigned long bitval = 1UL << irq_data->offset;
-
- writel_relaxed(bitval, intc->reg_pending);
- if (intc->reg_intpnd)
- writel_relaxed(bitval, intc->reg_intpnd);
-}
-
-static int s3c_irq_type(struct irq_data *data, unsigned int type)
-{
- switch (type) {
- case IRQ_TYPE_NONE:
- break;
- case IRQ_TYPE_EDGE_RISING:
- case IRQ_TYPE_EDGE_FALLING:
- case IRQ_TYPE_EDGE_BOTH:
- irq_set_handler(data->irq, handle_edge_irq);
- break;
- case IRQ_TYPE_LEVEL_LOW:
- case IRQ_TYPE_LEVEL_HIGH:
- irq_set_handler(data->irq, handle_level_irq);
- break;
- default:
- pr_err("No such irq type %d\n", type);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int s3c_irqext_type_set(void __iomem *gpcon_reg,
- void __iomem *extint_reg,
- unsigned long gpcon_offset,
- unsigned long extint_offset,
- unsigned int type)
-{
- unsigned long newvalue = 0, value;
-
- /* Set the GPIO to external interrupt mode */
- value = readl_relaxed(gpcon_reg);
- value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
- writel_relaxed(value, gpcon_reg);
-
- /* Set the external interrupt to pointed trigger type */
- switch (type)
- {
- case IRQ_TYPE_NONE:
- pr_warn("No edge setting!\n");
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
-
- default:
- pr_err("No such irq type %d\n", type);
- return -EINVAL;
- }
-
- value = readl_relaxed(extint_reg);
- value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
- writel_relaxed(value, extint_reg);
-
- return 0;
-}
-
-static int s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
- void __iomem *extint_reg;
- void __iomem *gpcon_reg;
- unsigned long gpcon_offset, extint_offset;
-
- if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (data->hwirq) * 2;
- extint_offset = (data->hwirq) * 4;
- } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT1;
- gpcon_offset = (data->hwirq - 8) * 2;
- extint_offset = (data->hwirq - 8) * 4;
- } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT2;
- gpcon_offset = (data->hwirq - 8) * 2;
- extint_offset = (data->hwirq - 16) * 4;
- } else {
- return -EINVAL;
- }
-
- return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
- extint_offset, type);
-}
-
-static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
-{
- void __iomem *extint_reg;
- void __iomem *gpcon_reg;
- unsigned long gpcon_offset, extint_offset;
-
- if (data->hwirq <= 3) {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (data->hwirq) * 2;
- extint_offset = (data->hwirq) * 4;
- } else {
- return -EINVAL;
- }
-
- return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
- extint_offset, type);
-}
-
-static struct irq_chip s3c_irq_chip = {
- .name = "s3c",
- .irq_ack = s3c_irq_ack,
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_set_type = s3c_irq_type,
- .irq_set_wake = s3c_irq_wake
-};
-
-static struct irq_chip s3c_irq_level_chip = {
- .name = "s3c-level",
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_ack = s3c_irq_ack,
- .irq_set_type = s3c_irq_type,
-};
-
-static struct irq_chip s3c_irqext_chip = {
- .name = "s3c-ext",
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_ack = s3c_irq_ack,
- .irq_set_type = s3c_irqext_type,
- .irq_set_wake = s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
- .name = "s3c-ext0",
- .irq_ack = s3c_irq_ack,
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_set_wake = s3c_irq_wake,
- .irq_set_type = s3c_irqext0_type,
-};
-
-static void s3c_irq_demux(struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc);
- struct s3c_irq_intc *intc = irq_data->intc;
- struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
- unsigned int n, offset, irq;
- unsigned long src, msk;
-
- /* we're using individual domains for the non-dt case
- * and one big domain for the dt case where the subintc
- * starts at hwirq number 32.
- */
- offset = irq_domain_get_of_node(intc->domain) ? 32 : 0;
-
- chained_irq_enter(chip, desc);
-
- src = readl_relaxed(sub_intc->reg_pending);
- msk = readl_relaxed(sub_intc->reg_mask);
-
- src &= ~msk;
- src &= irq_data->sub_bits;
-
- while (src) {
- n = __ffs(src);
- src &= ~(1 << n);
- irq = irq_find_mapping(sub_intc->domain, offset + n);
- generic_handle_irq(irq);
- }
-
- chained_irq_exit(chip, desc);
-}
-
-static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
- struct pt_regs *regs, int intc_offset)
-{
- int pnd;
- int offset;
-
- pnd = readl_relaxed(intc->reg_intpnd);
- if (!pnd)
- return false;
-
- /* non-dt machines use individual domains */
- if (!irq_domain_get_of_node(intc->domain))
- intc_offset = 0;
-
- /* We have a problem that the INTOFFSET register does not always
- * show one interrupt. Occasionally we get two interrupts through
- * the prioritiser, and this causes the INTOFFSET register to show
- * what looks like the logical-or of the two interrupt numbers.
- *
- * Thanks to Klaus, Shannon, et al for helping to debug this problem
- */
- offset = readl_relaxed(intc->reg_intpnd + 4);
-
- /* Find the bit manually, when the offset is wrong.
- * The pending register only ever contains the one bit of the next
- * interrupt to handle.
- */
- if (!(pnd & (1 << offset)))
- offset = __ffs(pnd);
-
- handle_domain_irq(intc->domain, intc_offset + offset, regs);
- return true;
-}
-
-asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
-{
- do {
- if (likely(s3c_intc[0]))
- if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
- continue;
-
- if (s3c_intc[2])
- if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
- continue;
-
- break;
- } while (1);
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- */
-int s3c24xx_set_fiq(unsigned int irq, bool on)
-{
- u32 intmod;
- unsigned offs;
-
- if (on) {
- offs = irq - FIQ_START;
- if (offs > 31)
- return -EINVAL;
-
- intmod = 1 << offs;
- } else {
- intmod = 0;
- }
-
- writel_relaxed(intmod, S3C2410_INTMOD);
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct s3c_irq_intc *intc = h->host_data;
- struct s3c_irq_data *irq_data = &intc->irqs[hw];
- struct s3c_irq_intc *parent_intc;
- struct s3c_irq_data *parent_irq_data;
- unsigned int irqno;
-
- /* attach controller pointer to irq_data */
- irq_data->intc = intc;
- irq_data->offset = hw;
-
- parent_intc = intc->parent;
-
- /* set handler and flags */
- switch (irq_data->type) {
- case S3C_IRQTYPE_NONE:
- return 0;
- case S3C_IRQTYPE_EINT:
- /* On the S3C2412, the EINT0to3 have a parent irq
- * but need the s3c_irq_eint0t4 chip
- */
- if (parent_intc && (!soc_is_s3c2412() || hw >= 4))
- irq_set_chip_and_handler(virq, &s3c_irqext_chip,
- handle_edge_irq);
- else
- irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
- handle_edge_irq);
- break;
- case S3C_IRQTYPE_EDGE:
- if (parent_intc || intc->reg_pending == S3C2416_SRCPND2)
- irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
- handle_edge_irq);
- else
- irq_set_chip_and_handler(virq, &s3c_irq_chip,
- handle_edge_irq);
- break;
- case S3C_IRQTYPE_LEVEL:
- if (parent_intc)
- irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
- handle_level_irq);
- else
- irq_set_chip_and_handler(virq, &s3c_irq_chip,
- handle_level_irq);
- break;
- default:
- pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
- return -EINVAL;
- }
-
- irq_set_chip_data(virq, irq_data);
-
- if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) {
- if (irq_data->parent_irq > 31) {
- pr_err("irq-s3c24xx: parent irq %lu is out of range\n",
- irq_data->parent_irq);
- return -EINVAL;
- }
-
- parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
- parent_irq_data->sub_intc = intc;
- parent_irq_data->sub_bits |= (1UL << hw);
-
- /* attach the demuxer to the parent irq */
- irqno = irq_find_mapping(parent_intc->domain,
- irq_data->parent_irq);
- if (!irqno) {
- pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
- irq_data->parent_irq);
- return -EINVAL;
- }
- irq_set_chained_handler(irqno, s3c_irq_demux);
- }
-
- return 0;
-}
-
-static const struct irq_domain_ops s3c24xx_irq_ops = {
- .map = s3c24xx_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
-{
- void __iomem *reg_source;
- unsigned long pend;
- unsigned long last;
- int i;
-
- /* if intpnd is set, read the next pending irq from there */
- reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = readl_relaxed(reg_source);
-
- if (pend == 0 || pend == last)
- break;
-
- writel_relaxed(pend, intc->reg_pending);
- if (intc->reg_intpnd)
- writel_relaxed(pend, intc->reg_intpnd);
-
- pr_info("irq: clearing pending status %08x\n", (int)pend);
- last = pend;
- }
-}
-
-static struct s3c_irq_intc * __init s3c24xx_init_intc(struct device_node *np,
- struct s3c_irq_data *irq_data,
- struct s3c_irq_intc *parent,
- unsigned long address)
-{
- struct s3c_irq_intc *intc;
- void __iomem *base = (void *)0xf6000000; /* static mapping */
- int irq_num;
- int irq_start;
- int ret;
-
- intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
- if (!intc)
- return ERR_PTR(-ENOMEM);
-
- intc->irqs = irq_data;
-
- if (parent)
- intc->parent = parent;
-
- /* select the correct data for the controller.
- * Need to hard code the irq num start and offset
- * to preserve the static mapping for now
- */
- switch (address) {
- case 0x4a000000:
- pr_debug("irq: found main intc\n");
- intc->reg_pending = base;
- intc->reg_mask = base + 0x08;
- intc->reg_intpnd = base + 0x10;
- irq_num = 32;
- irq_start = S3C2410_IRQ(0);
- break;
- case 0x4a000018:
- pr_debug("irq: found subintc\n");
- intc->reg_pending = base + 0x18;
- intc->reg_mask = base + 0x1c;
- irq_num = 29;
- irq_start = S3C2410_IRQSUB(0);
- break;
- case 0x4a000040:
- pr_debug("irq: found intc2\n");
- intc->reg_pending = base + 0x40;
- intc->reg_mask = base + 0x48;
- intc->reg_intpnd = base + 0x50;
- irq_num = 8;
- irq_start = S3C2416_IRQ(0);
- break;
- case 0x560000a4:
- pr_debug("irq: found eintc\n");
- base = (void *)0xfd000000;
-
- intc->reg_mask = base + 0xa4;
- intc->reg_pending = base + 0xa8;
- irq_num = 24;
- irq_start = S3C2410_IRQ(32);
- break;
- default:
- pr_err("irq: unsupported controller address\n");
- ret = -EINVAL;
- goto err;
- }
-
- /* now that all the data is complete, init the irq-domain */
- s3c24xx_clear_intc(intc);
- intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
- 0, &s3c24xx_irq_ops,
- intc);
- if (!intc->domain) {
- pr_err("irq: could not create irq-domain\n");
- ret = -EINVAL;
- goto err;
- }
-
- set_handle_irq(s3c24xx_handle_irq);
-
- return intc;
-
-err:
- kfree(intc);
- return ERR_PTR(ret);
-}
-
-static struct s3c_irq_data __maybe_unused init_eint[32] = {
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-#ifdef CONFIG_CPU_S3C2410
-static struct s3c_irq_data init_s3c2410base[32] = {
- { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2410subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-};
-
-void __init s3c2410_init_irq(void)
-{
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0],
- s3c_intc[0], 0x4a000018);
- s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-static struct s3c_irq_data init_s3c2412base[32] = {
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2412eint[32] = {
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-static struct s3c_irq_data init_s3c2412subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
- { .type = S3C_IRQTYPE_NONE, },
- { .type = S3C_IRQTYPE_NONE, },
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */
-};
-
-void __init s3c2412_init_irq(void)
-{
- pr_info("S3C2412: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4);
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0],
- s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-static struct s3c_irq_data init_s3c2416base[32] = {
- { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
- { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_NONE, },
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2416subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-static struct s3c_irq_data init_s3c2416_second[32] = {
- { .type = S3C_IRQTYPE_EDGE }, /* 2D */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
-};
-
-void __init s3c2416_init_irq(void)
-{
- pr_info("S3C2416: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0],
- s3c_intc[0], 0x4a000018);
-
- s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0],
- NULL, 0x4a000040);
-}
-
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-static struct s3c_irq_data init_s3c2440base[32] = {
- { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2440subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2440_init_irq(void)
-{
- pr_info("S3C2440: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0],
- s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-static struct s3c_irq_data init_s3c2442base[32] = {
- { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2442subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-};
-
-void __init s3c2442_init_irq(void)
-{
- pr_info("S3C2442: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0],
- s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-static struct s3c_irq_data init_s3c2443base[32] = {
- { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
- { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* CFON */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-
-static struct s3c_irq_data init_s3c2443subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2443_init_irq(void)
-{
- pr_info("S3C2443: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0],
- s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_OF
-static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- unsigned int ctrl_num = hw / 32;
- unsigned int intc_hw = hw % 32;
- struct s3c_irq_intc *intc = s3c_intc[ctrl_num];
- struct s3c_irq_intc *parent_intc = intc->parent;
- struct s3c_irq_data *irq_data = &intc->irqs[intc_hw];
-
- /* attach controller pointer to irq_data */
- irq_data->intc = intc;
- irq_data->offset = intc_hw;
-
- if (!parent_intc)
- irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq);
- else
- irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
- handle_edge_irq);
-
- irq_set_chip_data(virq, irq_data);
-
- return 0;
-}
-
-/* Translate our of irq notation
- * format: <ctrl_num ctrl_irq parent_irq type>
- */
-static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_type)
-{
- struct s3c_irq_intc *intc;
- struct s3c_irq_intc *parent_intc;
- struct s3c_irq_data *irq_data;
- struct s3c_irq_data *parent_irq_data;
- int irqno;
-
- if (WARN_ON(intsize < 4))
- return -EINVAL;
-
- if (intspec[0] > 2 || !s3c_intc[intspec[0]]) {
- pr_err("controller number %d invalid\n", intspec[0]);
- return -EINVAL;
- }
- intc = s3c_intc[intspec[0]];
-
- *out_hwirq = intspec[0] * 32 + intspec[2];
- *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
-
- parent_intc = intc->parent;
- if (parent_intc) {
- irq_data = &intc->irqs[intspec[2]];
- irq_data->parent_irq = intspec[1];
- parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
- parent_irq_data->sub_intc = intc;
- parent_irq_data->sub_bits |= (1UL << intspec[2]);
-
- /* parent_intc is always s3c_intc[0], so no offset */
- irqno = irq_create_mapping(parent_intc->domain, intspec[1]);
- if (irqno < 0) {
- pr_err("irq: could not map parent interrupt\n");
- return irqno;
- }
-
- irq_set_chained_handler(irqno, s3c_irq_demux);
- }
-
- return 0;
-}
-
-static const struct irq_domain_ops s3c24xx_irq_ops_of = {
- .map = s3c24xx_irq_map_of,
- .xlate = s3c24xx_irq_xlate_of,
-};
-
-struct s3c24xx_irq_of_ctrl {
- char *name;
- unsigned long offset;
- struct s3c_irq_intc **handle;
- struct s3c_irq_intc **parent;
- struct irq_domain_ops *ops;
-};
-
-static int __init s3c_init_intc_of(struct device_node *np,
- struct device_node *interrupt_parent,
- struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl)
-{
- struct s3c_irq_intc *intc;
- struct s3c24xx_irq_of_ctrl *ctrl;
- struct irq_domain *domain;
- void __iomem *reg_base;
- int i;
-
- reg_base = of_iomap(np, 0);
- if (!reg_base) {
- pr_err("irq-s3c24xx: could not map irq registers\n");
- return -EINVAL;
- }
-
- domain = irq_domain_add_linear(np, num_ctrl * 32,
- &s3c24xx_irq_ops_of, NULL);
- if (!domain) {
- pr_err("irq: could not create irq-domain\n");
- return -EINVAL;
- }
-
- for (i = 0; i < num_ctrl; i++) {
- ctrl = &s3c_ctrl[i];
-
- pr_debug("irq: found controller %s\n", ctrl->name);
-
- intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
- if (!intc)
- return -ENOMEM;
-
- intc->domain = domain;
- intc->irqs = kcalloc(32, sizeof(struct s3c_irq_data),
- GFP_KERNEL);
- if (!intc->irqs) {
- kfree(intc);
- return -ENOMEM;
- }
-
- if (ctrl->parent) {
- intc->reg_pending = reg_base + ctrl->offset;
- intc->reg_mask = reg_base + ctrl->offset + 0x4;
-
- if (*(ctrl->parent)) {
- intc->parent = *(ctrl->parent);
- } else {
- pr_warn("irq: parent of %s missing\n",
- ctrl->name);
- kfree(intc->irqs);
- kfree(intc);
- continue;
- }
- } else {
- intc->reg_pending = reg_base + ctrl->offset;
- intc->reg_mask = reg_base + ctrl->offset + 0x08;
- intc->reg_intpnd = reg_base + ctrl->offset + 0x10;
- }
-
- s3c24xx_clear_intc(intc);
- s3c_intc[i] = intc;
- }
-
- set_handle_irq(s3c24xx_handle_irq);
-
- return 0;
-}
-
-static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
- {
- .name = "intc",
- .offset = 0,
- }, {
- .name = "subintc",
- .offset = 0x18,
- .parent = &s3c_intc[0],
- }
-};
-
-int __init s3c2410_init_intc_of(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- return s3c_init_intc_of(np, interrupt_parent,
- s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl));
-}
-IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of);
-
-static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
- {
- .name = "intc",
- .offset = 0,
- }, {
- .name = "subintc",
- .offset = 0x18,
- .parent = &s3c_intc[0],
- }, {
- .name = "intc2",
- .offset = 0x40,
- }
-};
-
-int __init s3c2416_init_intc_of(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- return s3c_init_intc_of(np, interrupt_parent,
- s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl));
-}
-IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of);
-#endif