summaryrefslogtreecommitdiff
path: root/drivers/leds/leds-ns2.c
diff options
context:
space:
mode:
authorVincent Donnefort <vdonnefort@gmail.com>2015-07-02 20:56:40 +0300
committerJacek Anaszewski <j.anaszewski@samsung.com>2015-08-28 15:06:06 +0300
commitf7fafd083ccc340502448903aaddc76f10785c8c (patch)
tree55fefd21eb2ea7a01ab153523e3ba91d24b1c16e /drivers/leds/leds-ns2.c
parentde88e71a91ed7c8de321b44882e0805f0b24d734 (diff)
downloadlinux-f7fafd083ccc340502448903aaddc76f10785c8c.tar.xz
leds: leds-ns2: move LED modes mapping outside of the driver
On the board n090401 (Seagate NAS 4-Bay), the LED mode mapping (GPIO values to LED mode) is different from the one used on other boards supported by the leds-ns2 driver. With this patch the hardcoded mapping is removed from leds-ns2. Now, it must be defined either in the platform data (if an old-fashion board setup file is used) or in the DT node. In order to allow the later, this patch also introduces a modes-map property for the leds-ns2 DT binding. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Diffstat (limited to 'drivers/leds/leds-ns2.c')
-rw-r--r--drivers/leds/leds-ns2.c102
1 files changed, 54 insertions, 48 deletions
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index 1fd6adbb43b7..b0bc03539dbb 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -33,46 +33,20 @@
#include <linux/of_gpio.h>
/*
- * The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
- * relation with the SATA activity. This capability is exposed through the
- * "sata" sysfs attribute.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- * cmd_led | slow_led | /SATA active | LED state
- * | | |
- * 1 | 0 | x | off
- * - | 1 | x | on
- * 0 | 0 | 1 | on
- * 0 | 0 | 0 | blink (rate 300ms)
+ * The Network Space v2 dual-GPIO LED is wired to a CPLD. Three different LED
+ * modes are available: off, on and SATA activity blinking. The LED modes are
+ * controlled through two GPIOs (command and slow): each combination of values
+ * for the command/slow GPIOs corresponds to a LED mode.
*/
-enum ns2_led_modes {
- NS_V2_LED_OFF,
- NS_V2_LED_ON,
- NS_V2_LED_SATA,
-};
-
-struct ns2_led_mode_value {
- enum ns2_led_modes mode;
- int cmd_level;
- int slow_level;
-};
-
-static struct ns2_led_mode_value ns2_led_modval[] = {
- { NS_V2_LED_OFF , 1, 0 },
- { NS_V2_LED_ON , 0, 1 },
- { NS_V2_LED_ON , 1, 1 },
- { NS_V2_LED_SATA, 0, 0 },
-};
-
struct ns2_led_data {
struct led_classdev cdev;
unsigned cmd;
unsigned slow;
unsigned char sata; /* True when SATA mode active. */
rwlock_t rw_lock; /* Lock GPIOs. */
+ int num_modes;
+ struct ns2_led_modval *modval;
};
static int ns2_led_get_mode(struct ns2_led_data *led_dat,
@@ -88,10 +62,10 @@ static int ns2_led_get_mode(struct ns2_led_data *led_dat,
cmd_level = gpio_get_value(led_dat->cmd);
slow_level = gpio_get_value(led_dat->slow);
- for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
- if (cmd_level == ns2_led_modval[i].cmd_level &&
- slow_level == ns2_led_modval[i].slow_level) {
- *mode = ns2_led_modval[i].mode;
+ for (i = 0; i < led_dat->num_modes; i++) {
+ if (cmd_level == led_dat->modval[i].cmd_level &&
+ slow_level == led_dat->modval[i].slow_level) {
+ *mode = led_dat->modval[i].mode;
ret = 0;
break;
}
@@ -110,12 +84,12 @@ static void ns2_led_set_mode(struct ns2_led_data *led_dat,
write_lock_irqsave(&led_dat->rw_lock, flags);
- for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
- if (mode == ns2_led_modval[i].mode) {
+ for (i = 0; i < led_dat->num_modes; i++) {
+ if (mode == led_dat->modval[i].mode) {
gpio_set_value(led_dat->cmd,
- ns2_led_modval[i].cmd_level);
+ led_dat->modval[i].cmd_level);
gpio_set_value(led_dat->slow,
- ns2_led_modval[i].slow_level);
+ led_dat->modval[i].slow_level);
}
}
@@ -228,6 +202,8 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
led_dat->cdev.groups = ns2_led_groups;
led_dat->cmd = template->cmd;
led_dat->slow = template->slow;
+ led_dat->modval = template->modval;
+ led_dat->num_modes = template->num_modes;
ret = ns2_led_get_mode(led_dat, &mode);
if (ret < 0)
@@ -259,9 +235,8 @@ ns2_leds_get_of_pdata(struct device *dev, struct ns2_led_platform_data *pdata)
{
struct device_node *np = dev->of_node;
struct device_node *child;
- struct ns2_led *leds;
+ struct ns2_led *led, *leds;
int num_leds = 0;
- int i = 0;
num_leds = of_get_child_count(np);
if (!num_leds)
@@ -272,26 +247,57 @@ ns2_leds_get_of_pdata(struct device *dev, struct ns2_led_platform_data *pdata)
if (!leds)
return -ENOMEM;
+ led = leds;
for_each_child_of_node(np, child) {
const char *string;
- int ret;
+ int ret, i, num_modes;
+ struct ns2_led_modval *modval;
ret = of_get_named_gpio(child, "cmd-gpio", 0);
if (ret < 0)
return ret;
- leds[i].cmd = ret;
+ led->cmd = ret;
ret = of_get_named_gpio(child, "slow-gpio", 0);
if (ret < 0)
return ret;
- leds[i].slow = ret;
+ led->slow = ret;
ret = of_property_read_string(child, "label", &string);
- leds[i].name = (ret == 0) ? string : child->name;
+ led->name = (ret == 0) ? string : child->name;
ret = of_property_read_string(child, "linux,default-trigger",
&string);
if (ret == 0)
- leds[i].default_trigger = string;
+ led->default_trigger = string;
+
+ ret = of_property_count_u32_elems(child, "modes-map");
+ if (ret < 0 || ret % 3) {
+ dev_err(dev,
+ "Missing or malformed modes-map property\n");
+ return -EINVAL;
+ }
+
+ num_modes = ret / 3;
+ modval = devm_kzalloc(dev,
+ num_modes * sizeof(struct ns2_led_modval),
+ GFP_KERNEL);
+ if (!modval)
+ return -ENOMEM;
+
+ for (i = 0; i < num_modes; i++) {
+ of_property_read_u32_index(child,
+ "modes-map", 3 * i,
+ (u32 *) &modval[i].mode);
+ of_property_read_u32_index(child,
+ "modes-map", 3 * i + 1,
+ (u32 *) &modval[i].cmd_level);
+ of_property_read_u32_index(child,
+ "modes-map", 3 * i + 2,
+ (u32 *) &modval[i].slow_level);
+ }
+
+ led->num_modes = num_modes;
+ led->modval = modval;
- i++;
+ led++;
}
pdata->leds = leds;