summaryrefslogtreecommitdiff
path: root/drivers/leds
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2019-12-09 03:42:42 +0300
committerPavel <pavel@ucw.cz>2019-12-21 22:09:54 +0300
commit4c3718f9d6a6f6557b6e5564af8bd90130123fb8 (patch)
tree8b53dd0741987d057856df78ccc37004022a2cfa /drivers/leds
parent697529091ac7a0a90ca349b914bb30641c13c753 (diff)
downloadlinux-4c3718f9d6a6f6557b6e5564af8bd90130123fb8.tar.xz
leds: bd2802: Convert to use GPIO descriptors
The Rohm BD2802 have no in-kernel users so we can drop the GPIO number from the platform data and require users to provide the GPIO line using machine descriptors. As the descriptors come with inherent polarity inversion semantics, we invert the calls to set the GPIO line such that 0 means "unasserted" and 1 means "asserted". Put a note in the driver that machine descriptor tables will need to specify that the line is active low. Cc: Kim Kyuwon <chammoru@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
Diffstat (limited to 'drivers/leds')
-rw-r--r--drivers/leds/leds-bd2802.c27
1 files changed, 18 insertions, 9 deletions
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index e7ec6bff2b5f..bd61a823d0ca 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -10,7 +10,7 @@
#include <linux/module.h>
#include <linux/i2c.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/leds-bd2802.h>
@@ -67,6 +67,7 @@ struct led_state {
struct bd2802_led {
struct bd2802_led_platform_data *pdata;
struct i2c_client *client;
+ struct gpio_desc *reset;
struct rw_semaphore rwsem;
struct led_state led[2];
@@ -200,7 +201,7 @@ static void bd2802_update_state(struct bd2802_led *led, enum led_ids id,
return;
if (bd2802_is_all_off(led) && !led->adf_on) {
- gpio_set_value(led->pdata->reset_gpio, 0);
+ gpiod_set_value(led->reset, 1);
return;
}
@@ -226,7 +227,7 @@ static void bd2802_configure(struct bd2802_led *led)
static void bd2802_reset_cancel(struct bd2802_led *led)
{
- gpio_set_value(led->pdata->reset_gpio, 1);
+ gpiod_set_value(led->reset, 0);
udelay(100);
bd2802_configure(led);
}
@@ -420,7 +421,7 @@ static void bd2802_disable_adv_conf(struct bd2802_led *led)
bd2802_addr_attributes[i]);
if (bd2802_is_all_off(led))
- gpio_set_value(led->pdata->reset_gpio, 0);
+ gpiod_set_value(led->reset, 1);
led->adf_on = 0;
}
@@ -670,8 +671,16 @@ static int bd2802_probe(struct i2c_client *client,
pdata = led->pdata = dev_get_platdata(&client->dev);
i2c_set_clientdata(client, led);
- /* Configure RESET GPIO (L: RESET, H: RESET cancel) */
- gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH, "RGB_RESETB");
+ /*
+ * Configure RESET GPIO (L: RESET, H: RESET cancel)
+ *
+ * We request the reset GPIO as OUT_LOW which means de-asserted,
+ * board files specifying this GPIO line in a machine descriptor
+ * table should take care to specify GPIO_ACTIVE_LOW for this line.
+ */
+ led->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(led->reset))
+ return PTR_ERR(led->reset);
/* Tacss = min 0.1ms */
udelay(100);
@@ -685,7 +694,7 @@ static int bd2802_probe(struct i2c_client *client,
dev_info(&client->dev, "return 0x%02x\n", ret);
/* To save the power, reset BD2802 after detecting */
- gpio_set_value(led->pdata->reset_gpio, 0);
+ gpiod_set_value(led->reset, 1);
/* Default attributes */
led->wave_pattern = BD2802_PATTERN_HALF;
@@ -720,7 +729,7 @@ static int bd2802_remove(struct i2c_client *client)
struct bd2802_led *led = i2c_get_clientdata(client);
int i;
- gpio_set_value(led->pdata->reset_gpio, 0);
+ gpiod_set_value(led->reset, 1);
bd2802_unregister_led_classdev(led);
if (led->adf_on)
bd2802_disable_adv_conf(led);
@@ -750,7 +759,7 @@ static int bd2802_suspend(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct bd2802_led *led = i2c_get_clientdata(client);
- gpio_set_value(led->pdata->reset_gpio, 0);
+ gpiod_set_value(led->reset, 1);
return 0;
}