summaryrefslogtreecommitdiff
path: root/drivers/md/bcache/sysfs.c
diff options
context:
space:
mode:
authordongdong tao <dongdong.tao@canonical.com>2021-02-10 08:07:23 +0300
committerJens Axboe <axboe@kernel.dk>2021-02-10 18:05:59 +0300
commit71dda2a5625f31bc3410cb69c3d31376a2b66f28 (patch)
tree83f79a74974dab69ce241f287bd497b26f0fa899 /drivers/md/bcache/sysfs.c
parentee8f353b1591cef4a29cddeb379c1503559f474e (diff)
downloadlinux-71dda2a5625f31bc3410cb69c3d31376a2b66f28.tar.xz
bcache: consider the fragmentation when update the writeback rate
Current way to calculate the writeback rate only considered the dirty sectors, this usually works fine when the fragmentation is not high, but it will give us unreasonable small rate when we are under a situation that very few dirty sectors consumed a lot dirty buckets. In some case, the dirty bucekts can reached to CUTOFF_WRITEBACK_SYNC while the dirty data(sectors) not even reached the writeback_percent, the writeback rate will still be the minimum value (4k), thus it will cause all the writes to be stucked in a non-writeback mode because of the slow writeback. We accelerate the rate in 3 stages with different aggressiveness, the first stage starts when dirty buckets percent reach above BCH_WRITEBACK_FRAGMENT_THRESHOLD_LOW (50), the second is BCH_WRITEBACK_FRAGMENT_THRESHOLD_MID (57), the third is BCH_WRITEBACK_FRAGMENT_THRESHOLD_HIGH (64). By default the first stage tries to writeback the amount of dirty data in one bucket (on average) in (1 / (dirty_buckets_percent - 50)) second, the second stage tries to writeback the amount of dirty data in one bucket in (1 / (dirty_buckets_percent - 57)) * 100 millisecond, the third stage tries to writeback the amount of dirty data in one bucket in (1 / (dirty_buckets_percent - 64)) millisecond. the initial rate at each stage can be controlled by 3 configurable parameters writeback_rate_fp_term_{low|mid|high}, they are by default 1, 10, 1000, the hint of IO throughput that these values are trying to achieve is described by above paragraph, the reason that I choose those value as default is based on the testing and the production data, below is some details: A. When it comes to the low stage, there is still a bit far from the 70 threshold, so we only want to give it a little bit push by setting the term to 1, it means the initial rate will be 170 if the fragment is 6, it is calculated by bucket_size/fragment, this rate is very small, but still much reasonable than the minimum 8. For a production bcache with unheavy workload, if the cache device is bigger than 1 TB, it may take hours to consume 1% buckets, so it is very possible to reclaim enough dirty buckets in this stage, thus to avoid entering the next stage. B. If the dirty buckets ratio didn't turn around during the first stage, it comes to the mid stage, then it is necessary for mid stage to be more aggressive than low stage, so i choose the initial rate to be 10 times more than low stage, that means 1700 as the initial rate if the fragment is 6. This is some normal rate we usually see for a normal workload when writeback happens because of writeback_percent. C. If the dirty buckets ratio didn't turn around during the low and mid stages, it comes to the third stage, and it is the last chance that we can turn around to avoid the horrible cutoff writeback sync issue, then we choose 100 times more aggressive than the mid stage, that means 170000 as the initial rate if the fragment is 6. This is also inferred from a production bcache, I've got one week's writeback rate data from a production bcache which has quite heavy workloads, again, the writeback is triggered by the writeback percent, the highest rate area is around 100000 to 240000, so I believe this kind aggressiveness at this stage is reasonable for production. And it should be mostly enough because the hint is trying to reclaim 1000 bucket per second, and from that heavy production env, it is consuming 50 bucket per second on average in one week's data. Option writeback_consider_fragment is to control whether we want this feature to be on or off, it's on by default. Lastly, below is the performance data for all the testing result, including the data from production env: https://docs.google.com/document/d/1AmbIEa_2MhB9bqhC3rfga9tp7n9YX9PLn0jSUxscVW0/edit?usp=sharing Signed-off-by: dongdong tao <dongdong.tao@canonical.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Diffstat (limited to 'drivers/md/bcache/sysfs.c')
-rw-r--r--drivers/md/bcache/sysfs.c23
1 files changed, 23 insertions, 0 deletions
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 00a520c03f41..eef15f8022ba 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -117,10 +117,14 @@ rw_attribute(writeback_running);
rw_attribute(writeback_percent);
rw_attribute(writeback_delay);
rw_attribute(writeback_rate);
+rw_attribute(writeback_consider_fragment);
rw_attribute(writeback_rate_update_seconds);
rw_attribute(writeback_rate_i_term_inverse);
rw_attribute(writeback_rate_p_term_inverse);
+rw_attribute(writeback_rate_fp_term_low);
+rw_attribute(writeback_rate_fp_term_mid);
+rw_attribute(writeback_rate_fp_term_high);
rw_attribute(writeback_rate_minimum);
read_attribute(writeback_rate_debug);
@@ -195,6 +199,7 @@ SHOW(__bch_cached_dev)
var_printf(bypass_torture_test, "%i");
var_printf(writeback_metadata, "%i");
var_printf(writeback_running, "%i");
+ var_printf(writeback_consider_fragment, "%i");
var_print(writeback_delay);
var_print(writeback_percent);
sysfs_hprint(writeback_rate,
@@ -205,6 +210,9 @@ SHOW(__bch_cached_dev)
var_print(writeback_rate_update_seconds);
var_print(writeback_rate_i_term_inverse);
var_print(writeback_rate_p_term_inverse);
+ var_print(writeback_rate_fp_term_low);
+ var_print(writeback_rate_fp_term_mid);
+ var_print(writeback_rate_fp_term_high);
var_print(writeback_rate_minimum);
if (attr == &sysfs_writeback_rate_debug) {
@@ -303,6 +311,7 @@ STORE(__cached_dev)
sysfs_strtoul_bool(bypass_torture_test, dc->bypass_torture_test);
sysfs_strtoul_bool(writeback_metadata, dc->writeback_metadata);
sysfs_strtoul_bool(writeback_running, dc->writeback_running);
+ sysfs_strtoul_bool(writeback_consider_fragment, dc->writeback_consider_fragment);
sysfs_strtoul_clamp(writeback_delay, dc->writeback_delay, 0, UINT_MAX);
sysfs_strtoul_clamp(writeback_percent, dc->writeback_percent,
@@ -331,6 +340,16 @@ STORE(__cached_dev)
sysfs_strtoul_clamp(writeback_rate_p_term_inverse,
dc->writeback_rate_p_term_inverse,
1, UINT_MAX);
+ sysfs_strtoul_clamp(writeback_rate_fp_term_low,
+ dc->writeback_rate_fp_term_low,
+ 1, dc->writeback_rate_fp_term_mid - 1);
+ sysfs_strtoul_clamp(writeback_rate_fp_term_mid,
+ dc->writeback_rate_fp_term_mid,
+ dc->writeback_rate_fp_term_low + 1,
+ dc->writeback_rate_fp_term_high - 1);
+ sysfs_strtoul_clamp(writeback_rate_fp_term_high,
+ dc->writeback_rate_fp_term_high,
+ dc->writeback_rate_fp_term_mid + 1, UINT_MAX);
sysfs_strtoul_clamp(writeback_rate_minimum,
dc->writeback_rate_minimum,
1, UINT_MAX);
@@ -499,9 +518,13 @@ static struct attribute *bch_cached_dev_files[] = {
&sysfs_writeback_delay,
&sysfs_writeback_percent,
&sysfs_writeback_rate,
+ &sysfs_writeback_consider_fragment,
&sysfs_writeback_rate_update_seconds,
&sysfs_writeback_rate_i_term_inverse,
&sysfs_writeback_rate_p_term_inverse,
+ &sysfs_writeback_rate_fp_term_low,
+ &sysfs_writeback_rate_fp_term_mid,
+ &sysfs_writeback_rate_fp_term_high,
&sysfs_writeback_rate_minimum,
&sysfs_writeback_rate_debug,
&sysfs_io_errors,