summaryrefslogtreecommitdiff
path: root/drivers/md
diff options
context:
space:
mode:
authorNeilBrown <neilb@suse.de>2005-11-09 08:39:22 +0300
committerLinus Torvalds <torvalds@g5.osdl.org>2005-11-09 18:56:36 +0300
commit4e5314b56a7ea11c7a5f2b8418992b2f49648a25 (patch)
tree58b0c604f4f4e55523d2c93971f79d80e406b9ce /drivers/md
parent703ebe86a999861e833be4015aaf552837e9613a (diff)
downloadlinux-4e5314b56a7ea11c7a5f2b8418992b2f49648a25.tar.xz
[PATCH] md: better handling of readerrors with raid5.
This patch changes the behaviour of raid5 when it gets a read error. Instead of just failing the device, it tried to find out what should have been there, and writes it over the bad block. For some media-errors, this has a reasonable chance of fixing the error. If the write succeeds, and a subsequent read succeeds as well, raid5 decided the address is OK and conitnues. Instead of failing a drive on read-error, we attempt to re-write the block, and then re-read. If that all works, we allow the device to remain in the array. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/md')
-rw-r--r--drivers/md/raid5.c61
1 files changed, 56 insertions, 5 deletions
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 1223e98ecd70..8cf1ae8b8a71 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -349,7 +349,7 @@ static void shrink_stripes(raid5_conf_t *conf)
conf->slab_cache = NULL;
}
-static int raid5_end_read_request (struct bio * bi, unsigned int bytes_done,
+static int raid5_end_read_request(struct bio * bi, unsigned int bytes_done,
int error)
{
struct stripe_head *sh = bi->bi_private;
@@ -401,10 +401,27 @@ static int raid5_end_read_request (struct bio * bi, unsigned int bytes_done,
}
#else
set_bit(R5_UPTODATE, &sh->dev[i].flags);
-#endif
+#endif
+ if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
+ printk("R5: read error corrected!!\n");
+ clear_bit(R5_ReadError, &sh->dev[i].flags);
+ clear_bit(R5_ReWrite, &sh->dev[i].flags);
+ }
} else {
- md_error(conf->mddev, conf->disks[i].rdev);
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
+ if (conf->mddev->degraded) {
+ printk("R5: read error not correctable.\n");
+ clear_bit(R5_ReadError, &sh->dev[i].flags);
+ clear_bit(R5_ReWrite, &sh->dev[i].flags);
+ md_error(conf->mddev, conf->disks[i].rdev);
+ } else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) {
+ /* Oh, no!!! */
+ printk("R5: read error NOT corrected!!\n");
+ clear_bit(R5_ReadError, &sh->dev[i].flags);
+ clear_bit(R5_ReWrite, &sh->dev[i].flags);
+ md_error(conf->mddev, conf->disks[i].rdev);
+ } else
+ set_bit(R5_ReadError, &sh->dev[i].flags);
}
rdev_dec_pending(conf->disks[i].rdev, conf->mddev);
#if 0
@@ -966,6 +983,12 @@ static void handle_stripe(struct stripe_head *sh)
if (dev->written) written++;
rdev = conf->disks[i].rdev; /* FIXME, should I be looking rdev */
if (!rdev || !rdev->in_sync) {
+ /* The ReadError flag wil just be confusing now */
+ clear_bit(R5_ReadError, &dev->flags);
+ clear_bit(R5_ReWrite, &dev->flags);
+ }
+ if (!rdev || !rdev->in_sync
+ || test_bit(R5_ReadError, &dev->flags)) {
failed++;
failed_num = i;
} else
@@ -980,6 +1003,14 @@ static void handle_stripe(struct stripe_head *sh)
if (failed > 1 && to_read+to_write+written) {
for (i=disks; i--; ) {
int bitmap_end = 0;
+
+ if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
+ mdk_rdev_t *rdev = conf->disks[i].rdev;
+ if (rdev && rdev->in_sync)
+ /* multiple read failures in one stripe */
+ md_error(conf->mddev, rdev);
+ }
+
spin_lock_irq(&conf->device_lock);
/* fail all writes first */
bi = sh->dev[i].towrite;
@@ -1015,7 +1046,8 @@ static void handle_stripe(struct stripe_head *sh)
}
/* fail any reads if this device is non-operational */
- if (!test_bit(R5_Insync, &sh->dev[i].flags)) {
+ if (!test_bit(R5_Insync, &sh->dev[i].flags) ||
+ test_bit(R5_ReadError, &sh->dev[i].flags)) {
bi = sh->dev[i].toread;
sh->dev[i].toread = NULL;
if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
@@ -1274,7 +1306,26 @@ static void handle_stripe(struct stripe_head *sh)
md_done_sync(conf->mddev, STRIPE_SECTORS,1);
clear_bit(STRIPE_SYNCING, &sh->state);
}
-
+
+ /* If the failed drive is just a ReadError, then we might need to progress
+ * the repair/check process
+ */
+ if (failed == 1 && test_bit(R5_ReadError, &sh->dev[failed_num].flags)
+ && !test_bit(R5_LOCKED, &sh->dev[failed_num].flags)
+ && test_bit(R5_UPTODATE, &sh->dev[failed_num].flags)
+ ) {
+ dev = &sh->dev[failed_num];
+ if (!test_bit(R5_ReWrite, &dev->flags)) {
+ set_bit(R5_Wantwrite, &dev->flags);
+ set_bit(R5_ReWrite, &dev->flags);
+ set_bit(R5_LOCKED, &dev->flags);
+ } else {
+ /* let's read it back */
+ set_bit(R5_Wantread, &dev->flags);
+ set_bit(R5_LOCKED, &dev->flags);
+ }
+ }
+
spin_unlock(&sh->lock);
while ((bi=return_bi)) {