media: nxp: imx8-isi: Add ISI support for i.MX93

i.MX93 uses a different gasket which has different register definitions
compared with i.MX8. Hence implement the gasket callbacks in order to
add ISI support for i.MX93.

Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

3 files changed, 48 insertions, 0 deletions

diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
index 59f75387f592..81be744e9f1b 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
@@ -307,6 +307,20 @@ static const struct mxc_isi_plat_data mxc_imx8mp_data = {
 	.has_36bit_dma		= true,
 };
 
+static const struct mxc_isi_plat_data mxc_imx93_data = {
+	.model			= MXC_ISI_IMX93,
+	.num_ports		= 1,
+	.num_channels		= 1,
+	.reg_offset		= 0,
+	.ier_reg		= &mxc_imx8_isi_ier_v2,
+	.set_thd		= &mxc_imx8_isi_thd_v1,
+	.clks			= mxc_imx8mn_clks,
+	.num_clks		= ARRAY_SIZE(mxc_imx8mn_clks),
+	.buf_active_reverse	= true,
+	.gasket_ops		= &mxc_imx93_gasket_ops,
+	.has_36bit_dma		= false,
+};
+
 /* -----------------------------------------------------------------------------
  * Power management
  */
@@ -518,6 +532,7 @@ static int mxc_isi_remove(struct platform_device *pdev)
 static const struct of_device_id mxc_isi_of_match[] = {
 	{ .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data },
 	{ .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data },
+	{ .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, mxc_isi_of_match);
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
index 78ca047d93d1..2810ebe9b5f7 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
@@ -158,6 +158,7 @@ struct mxc_gasket_ops {
 enum model {
 	MXC_ISI_IMX8MN,
 	MXC_ISI_IMX8MP,
+	MXC_ISI_IMX93,
 };
 
 struct mxc_isi_plat_data {
@@ -295,6 +296,7 @@ struct mxc_isi_dev {
 };
 
 extern const struct mxc_gasket_ops mxc_imx8_gasket_ops;
+extern const struct mxc_gasket_ops mxc_imx93_gasket_ops;
 
 int mxc_isi_crossbar_init(struct mxc_isi_dev *isi);
 void mxc_isi_crossbar_cleanup(struct mxc_isi_crossbar *xbar);
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
index e073405a1ad5..f69c3b5d4782 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
@@ -52,3 +52,34 @@ const struct mxc_gasket_ops mxc_imx8_gasket_ops = {
 	.enable = mxc_imx8_gasket_enable,
 	.disable = mxc_imx8_gasket_disable,
 };
+
+/* -----------------------------------------------------------------------------
+ * i.MX93 gasket
+ */
+
+#define DISP_MIX_CAMERA_MUX                     0x30
+#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x)        (((x) & 0x3f) << 3)
+#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE       BIT(16)
+
+static void mxc_imx93_gasket_enable(struct mxc_isi_dev *isi,
+				    const struct v4l2_mbus_frame_desc *fd,
+				    const struct v4l2_mbus_framefmt *fmt,
+				    const unsigned int port)
+{
+	u32 val;
+
+	val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt);
+	val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE;
+	regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val);
+}
+
+static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi,
+				     unsigned int port)
+{
+	regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, 0);
+}
+
+const struct mxc_gasket_ops mxc_imx93_gasket_ops = {
+	.enable = mxc_imx93_gasket_enable,
+	.disable = mxc_imx93_gasket_disable,
+};