summaryrefslogtreecommitdiff
path: root/drivers/media
diff options
context:
space:
mode:
authorSakari Ailus <sakari.ailus@linux.intel.com>2020-06-22 13:16:24 +0300
committerMauro Carvalho Chehab <mchehab+huawei@kernel.org>2020-12-07 17:52:09 +0300
commitcac8f5d28e56c405befd1613fc38c962aaf69f30 (patch)
treedb75fe3b01234730fee1d89847e102a49c5ebc3a /drivers/media
parente583e654565fd12e45d8cef64dcdd80e2902ac13 (diff)
downloadlinux-cac8f5d28e56c405befd1613fc38c962aaf69f30.tar.xz
media: ccs-pll: Add support for lane speed model
CCS PLL includes a capability to calculate the VT clocks on per-lane basis. Add support for this feature. Move calculation of the pixel rate on the CSI-2 bus early in the function as everything needed to calculate it is already available. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Diffstat (limited to 'drivers/media')
-rw-r--r--drivers/media/i2c/ccs-pll.c36
-rw-r--r--drivers/media/i2c/ccs-pll.h6
2 files changed, 31 insertions, 11 deletions
diff --git a/drivers/media/i2c/ccs-pll.c b/drivers/media/i2c/ccs-pll.c
index d33a2575329c..9750b49d834a 100644
--- a/drivers/media/i2c/ccs-pll.c
+++ b/drivers/media/i2c/ccs-pll.c
@@ -251,11 +251,12 @@ __ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
op_pll_fr->pll_op_clk_freq_hz = op_pll_fr->pll_ip_clk_freq_hz
* op_pll_fr->pll_multiplier;
- op_pll_bk->pix_clk_div = pll->bits_per_pixel;
- dev_dbg(dev, "op_pix_clk_div: %u\n", op_pll_bk->pix_clk_div);
-
+ op_pll_bk->pix_clk_div = pll->bits_per_pixel
+ * pll->op_lanes / pll->csi2.lanes;
op_pll_bk->pix_clk_freq_hz =
op_pll_bk->sys_clk_freq_hz / op_pll_bk->pix_clk_div;
+ dev_dbg(dev, "op_pix_clk_div: %u\n", op_pll_bk->pix_clk_div);
+
if (pll->flags & CCS_PLL_FLAG_NO_OP_CLOCKS) {
/* No OP clocks --- VT clocks are used instead. */
@@ -283,15 +284,16 @@ __ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
* divisors. One must make sure that horizontal blanking is
* enough to accommodate the CSI-2 sync codes.
*
- * Take scaling factor into account as well.
+ * Take scaling factor and number of VT lanes into account as well.
*
* Find absolute limits for the factor of vt divider.
*/
dev_dbg(dev, "scale_m: %u\n", pll->scale_m);
min_vt_div = DIV_ROUND_UP(op_pll_bk->pix_clk_div
- * op_pll_bk->sys_clk_div * pll->scale_n,
- lane_op_clock_ratio * vt_op_binning_div
- * pll->scale_m);
+ * op_pll_bk->sys_clk_div * pll->scale_n
+ * pll->vt_lanes,
+ pll->op_lanes * vt_op_binning_div
+ * pll->scale_m * lane_op_clock_ratio);
/* Find smallest and biggest allowed vt divisor. */
dev_dbg(dev, "min_vt_div: %u\n", min_vt_div);
@@ -387,9 +389,8 @@ __ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
pll->vt_bk.sys_clk_freq_hz / pll->vt_bk.pix_clk_div;
out_skip_vt_calc:
- pll->pixel_rate_csi =
- op_pll_bk->pix_clk_freq_hz * lane_op_clock_ratio;
- pll->pixel_rate_pixel_array = pll->vt_bk.pix_clk_freq_hz;
+ pll->pixel_rate_pixel_array =
+ pll->vt_bk.pix_clk_freq_hz * pll->vt_lanes;
return check_all_bounds(dev, lim, op_lim_fr, op_lim_bk, pll, op_pll_fr,
op_pll_bk);
@@ -409,6 +410,13 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
uint32_t i;
int rval = -EINVAL;
+ if (!(pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL)) {
+ pll->op_lanes = 1;
+ pll->vt_lanes = 1;
+ }
+ dev_dbg(dev, "vt_lanes: %u\n", pll->vt_lanes);
+ dev_dbg(dev, "op_lanes: %u\n", pll->op_lanes);
+
if (pll->flags & CCS_PLL_FLAG_NO_OP_CLOCKS) {
/*
* If there's no OP PLL at all, use the VT values
@@ -433,12 +441,18 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
case CCS_PLL_BUS_TYPE_CSI2_DPHY:
/* CSI transfers 2 bits per clock per lane; thus times 2 */
op_pll_bk->sys_clk_freq_hz = pll->link_freq * 2
- * (pll->csi2.lanes / lane_op_clock_ratio);
+ * (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL ?
+ 1 : pll->csi2.lanes) / lane_op_clock_ratio;
break;
default:
return -EINVAL;
}
+ pll->pixel_rate_csi =
+ op_pll_bk->pix_clk_freq_hz
+ * (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL ?
+ pll->csi2.lanes : 1) * lane_op_clock_ratio;
+
/* Figure out limits for OP pre-pll divider based on extclk */
dev_dbg(dev, "min / max op_pre_pll_clk_div: %u / %u\n",
op_lim_fr->min_pre_pll_clk_div, op_lim_fr->max_pre_pll_clk_div);
diff --git a/drivers/media/i2c/ccs-pll.h b/drivers/media/i2c/ccs-pll.h
index 3ad4e6524ab6..fe8eb3d4bcff 100644
--- a/drivers/media/i2c/ccs-pll.h
+++ b/drivers/media/i2c/ccs-pll.h
@@ -22,6 +22,8 @@
/* op pix clock is for all lanes in total normally */
#define CCS_PLL_FLAG_OP_PIX_CLOCK_PER_LANE BIT(0)
#define CCS_PLL_FLAG_NO_OP_CLOCKS BIT(1)
+/* CCS PLL flags */
+#define CCS_PLL_FLAG_LANE_SPEED_MODEL BIT(2)
/**
* struct ccs_pll_branch_fr - CCS PLL configuration (front)
@@ -63,6 +65,8 @@ struct ccs_pll_branch_bk {
* All information required to calculate CCS PLL configuration.
*
* @bus_type: Type of the data bus, CCS_PLL_BUS_TYPE_* (input)
+ * @op_lanes: Number of operational lanes (input)
+ * @vt_lanes: Number of video timing lanes (input)
* @csi2: CSI-2 related parameters
* @csi2.lanes: The number of the CSI-2 data lanes (input)
* @binning_vertical: Vertical binning factor (input)
@@ -84,6 +88,8 @@ struct ccs_pll_branch_bk {
struct ccs_pll {
/* input values */
uint8_t bus_type;
+ uint8_t op_lanes;
+ uint8_t vt_lanes;
struct {
uint8_t lanes;
} csi2;