Merge tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "There's one API update here, a new API factoring out a common pattern
  for reference voltage supplies. These are supplies used as a reference
  by analogue circuits where the consumer requests and enables the
  supply, reads the voltage to calibrate the user and then never touches
  it again. This is factored out into a single operation which just
  returns the voltage and uses devm_ to manage the request and enable
  portion.

  Otherwise this has been a very quiet release, we've got some new
  device support, some small fixes, housekeeping and cleanup work but
  nothing substantial.

  There's also some non-regulator changes in here, a number of users for
  the new reference voltage API were merged along with it and some MFD
  changes were pulled in as dependencies for new driver work.

  Highlights:

   - Add a new API for single operation handling of reference voltages

   - Support for Allwinner AXP717 and D1, and NXP PCA9561A"

* tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits)
  regulator: sun20i: Add Allwinner D1 LDOs driver
  regulator: dt-bindings: Add Allwinner D1 system LDOs
  regulator: Mention regulator id in error message about dummy supplies
  staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage()
  iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage()
  iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage()
  hwmon: (adc128d818) simplify final return in probe
  regulator: devres: fix devm_regulator_get_enable_read_voltage() return
  hwmon: (da9052) Use devm_regulator_get_enable_read_voltage()
  hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage()
  regulator: devres: add API for reference voltage supplies
  regulator: rtq2208: Fix LDO discharge register and add vsel setting
  regulator: dt-bindings: fixed-regulator: Add a preferred node name
  regulator: axp20x: add support for the AXP717
  mfd: axp20x: Add support for AXP717 PMIC
  dt-bindings: mfd: x-powers,axp152: Document AXP717
  regulator: axp20x: fix typo-ed identifier
  dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
  regulator: pca9450: add pca9451a support
  regulator: dt-bindings: pca9450: add pca9451a support
  ...

1 files changed, 90 insertions, 0 deletions

diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index d8daa593ebd5..48ce6ea693ce 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -42,6 +42,7 @@ static const char * const axp20x_model_names[] = {
 	"AXP223",
 	"AXP288",
 	"AXP313a",
+	"AXP717",
 	"AXP803",
 	"AXP806",
 	"AXP809",
@@ -207,6 +208,25 @@ static const struct regmap_access_table axp313a_volatile_table = {
 	.n_yes_ranges = ARRAY_SIZE(axp313a_volatile_ranges),
 };
 
+static const struct regmap_range axp717_writeable_ranges[] = {
+	regmap_reg_range(AXP717_IRQ0_EN, AXP717_IRQ4_EN),
+	regmap_reg_range(AXP717_DCDC_OUTPUT_CONTROL, AXP717_CPUSLDO_CONTROL),
+};
+
+static const struct regmap_range axp717_volatile_ranges[] = {
+	regmap_reg_range(AXP717_IRQ0_STATE, AXP717_IRQ4_STATE),
+};
+
+static const struct regmap_access_table axp717_writeable_table = {
+	.yes_ranges = axp717_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(axp717_writeable_ranges),
+};
+
+static const struct regmap_access_table axp717_volatile_table = {
+	.yes_ranges = axp717_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(axp717_volatile_ranges),
+};
+
 static const struct regmap_range axp806_volatile_ranges[] = {
 	regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
 };
@@ -317,6 +337,11 @@ static const struct resource axp313a_pek_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP313A_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
 };
 
+static const struct resource axp717_pek_resources[] = {
+	DEFINE_RES_IRQ_NAMED(AXP717_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
+	DEFINE_RES_IRQ_NAMED(AXP717_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
+};
+
 static const struct resource axp803_pek_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
 	DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
@@ -391,6 +416,15 @@ static const struct regmap_config axp313a_regmap_config = {
 	.cache_type = REGCACHE_MAPLE,
 };
 
+static const struct regmap_config axp717_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.wr_table = &axp717_writeable_table,
+	.volatile_table = &axp717_volatile_table,
+	.max_register = AXP717_CPUSLDO_CONTROL,
+	.cache_type = REGCACHE_RBTREE,
+};
+
 static const struct regmap_config axp806_regmap_config = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -589,6 +623,40 @@ static const struct regmap_irq axp313a_regmap_irqs[] = {
 	INIT_REGMAP_IRQ(AXP313A, DIE_TEMP_HIGH,		0, 0),
 };
 
+static const struct regmap_irq axp717_regmap_irqs[] = {
+	INIT_REGMAP_IRQ(AXP717, SOC_DROP_LVL2,		0, 7),
+	INIT_REGMAP_IRQ(AXP717, SOC_DROP_LVL1,		0, 6),
+	INIT_REGMAP_IRQ(AXP717, GAUGE_NEW_SOC,		0, 4),
+	INIT_REGMAP_IRQ(AXP717, BOOST_OVER_V,		0, 2),
+	INIT_REGMAP_IRQ(AXP717, VBUS_OVER_V,		0, 1),
+	INIT_REGMAP_IRQ(AXP717, VBUS_FAULT,		0, 0),
+	INIT_REGMAP_IRQ(AXP717, VBUS_PLUGIN,		1, 7),
+	INIT_REGMAP_IRQ(AXP717, VBUS_REMOVAL,		1, 6),
+	INIT_REGMAP_IRQ(AXP717, BATT_PLUGIN,		1, 5),
+	INIT_REGMAP_IRQ(AXP717, BATT_REMOVAL,		1, 4),
+	INIT_REGMAP_IRQ(AXP717, PEK_SHORT,		1, 3),
+	INIT_REGMAP_IRQ(AXP717, PEK_LONG,		1, 2),
+	INIT_REGMAP_IRQ(AXP717, PEK_FAL_EDGE,		1, 1),
+	INIT_REGMAP_IRQ(AXP717, PEK_RIS_EDGE,		1, 0),
+	INIT_REGMAP_IRQ(AXP717, WDOG_EXPIRE,		2, 7),
+	INIT_REGMAP_IRQ(AXP717, LDO_OVER_CURR,		2, 6),
+	INIT_REGMAP_IRQ(AXP717, BATT_OVER_CURR,		2, 5),
+	INIT_REGMAP_IRQ(AXP717, CHARG_DONE,		2, 4),
+	INIT_REGMAP_IRQ(AXP717, CHARG,			2, 3),
+	INIT_REGMAP_IRQ(AXP717, DIE_TEMP_HIGH,		2, 2),
+	INIT_REGMAP_IRQ(AXP717, CHARG_TIMER,		2, 1),
+	INIT_REGMAP_IRQ(AXP717, BATT_OVER_V,		2, 0),
+	INIT_REGMAP_IRQ(AXP717, BC_USB_DONE,		3, 7),
+	INIT_REGMAP_IRQ(AXP717, BC_USB_CHNG,		3, 6),
+	INIT_REGMAP_IRQ(AXP717, BATT_QUIT_TEMP_HIGH,	3, 4),
+	INIT_REGMAP_IRQ(AXP717, BATT_CHG_TEMP_HIGH,	3, 3),
+	INIT_REGMAP_IRQ(AXP717, BATT_CHG_TEMP_LOW,	3, 2),
+	INIT_REGMAP_IRQ(AXP717, BATT_ACT_TEMP_HIGH,	3, 1),
+	INIT_REGMAP_IRQ(AXP717, BATT_ACT_TEMP_LOW,	3, 0),
+	INIT_REGMAP_IRQ(AXP717, TYPEC_REMOVE,		4, 6),
+	INIT_REGMAP_IRQ(AXP717, TYPEC_PLUGIN,		4, 5),
+};
+
 static const struct regmap_irq axp803_regmap_irqs[] = {
 	INIT_REGMAP_IRQ(AXP803, ACIN_OVER_V,		0, 7),
 	INIT_REGMAP_IRQ(AXP803, ACIN_PLUGIN,		0, 6),
@@ -776,6 +844,17 @@ static const struct regmap_irq_chip axp313a_regmap_irq_chip = {
 	.num_regs		= 1,
 };
 
+static const struct regmap_irq_chip axp717_regmap_irq_chip = {
+	.name			= "axp717_irq_chip",
+	.status_base		= AXP717_IRQ0_STATE,
+	.ack_base		= AXP717_IRQ0_STATE,
+	.unmask_base		= AXP717_IRQ0_EN,
+	.init_ack_masked	= true,
+	.irqs			= axp717_regmap_irqs,
+	.num_irqs		= ARRAY_SIZE(axp717_regmap_irqs),
+	.num_regs		= 5,
+};
+
 static const struct regmap_irq_chip axp803_regmap_irq_chip = {
 	.name			= "axp803",
 	.status_base		= AXP20X_IRQ1_STATE,
@@ -941,6 +1020,11 @@ static struct mfd_cell axp313a_cells[] = {
 	MFD_CELL_RES("axp313a-pek", axp313a_pek_resources),
 };
 
+static struct mfd_cell axp717_cells[] = {
+	MFD_CELL_NAME("axp20x-regulator"),
+	MFD_CELL_RES("axp20x-pek", axp717_pek_resources),
+};
+
 static const struct resource axp288_adc_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP288_IRQ_GPADC, "GPADC"),
 };
@@ -1181,6 +1265,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
 		axp20x->regmap_cfg = &axp313a_regmap_config;
 		axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
 		break;
+	case AXP717_ID:
+		axp20x->nr_cells = ARRAY_SIZE(axp717_cells);
+		axp20x->cells = axp717_cells;
+		axp20x->regmap_cfg = &axp717_regmap_config;
+		axp20x->regmap_irq_chip = &axp717_regmap_irq_chip;
+		break;
 	case AXP803_ID:
 		axp20x->nr_cells = ARRAY_SIZE(axp803_cells);
 		axp20x->cells = axp803_cells;