summaryrefslogtreecommitdiff
path: root/drivers/mfd/dm355evm_msp.c
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2020-08-26 23:21:49 +0300
committerLee Jones <lee.jones@linaro.org>2020-09-30 18:25:03 +0300
commitb6d213fb0b503683c0c6d33d80c85babd36bf0fc (patch)
tree7f64ecaf7eca10063659165d133de7ce4a2abe39 /drivers/mfd/dm355evm_msp.c
parent0f1b1b899521e3380a01f9f88a1bcb6163b7ee9f (diff)
downloadlinux-b6d213fb0b503683c0c6d33d80c85babd36bf0fc.tar.xz
mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table
This converts the DaVinci DM355EVM LEDs to use GPIO descriptor look-ups. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'drivers/mfd/dm355evm_msp.c')
-rw-r--r--drivers/mfd/dm355evm_msp.c76
1 files changed, 50 insertions, 26 deletions
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 151c36ce7343..54fb6cbd2aa0 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/leds.h>
#include <linux/i2c.h>
#include <linux/mfd/dm355evm_msp.h>
@@ -116,6 +117,54 @@ static const u8 msp_gpios[] = {
MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC), /* mmc1 WP, nCD */
};
+static struct gpio_led evm_leds[] = {
+ { .name = "dm355evm::ds14",
+ .default_trigger = "heartbeat", },
+ { .name = "dm355evm::ds15",
+ .default_trigger = "mmc0", },
+ { .name = "dm355evm::ds16",
+ /* could also be a CE-ATA drive */
+ .default_trigger = "mmc1", },
+ { .name = "dm355evm::ds17",
+ .default_trigger = "nand-disk", },
+ { .name = "dm355evm::ds18", },
+ { .name = "dm355evm::ds19", },
+ { .name = "dm355evm::ds20", },
+ { .name = "dm355evm::ds21", },
+};
+
+static struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+};
+
+static struct gpiod_lookup_table evm_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ /*
+ * These GPIOs are on the dm355evm_msp
+ * GPIO chip at index 0..7
+ */
+ GPIO_LOOKUP_IDX("dm355evm_msp", 0, NULL,
+ 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 1, NULL,
+ 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 2, NULL,
+ 2, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 3, NULL,
+ 3, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 4, NULL,
+ 4, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 5, NULL,
+ 5, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 6, NULL,
+ 6, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 7, NULL,
+ 7, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
#define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3)
#define MSP_GPIO_MASK(offset) BIT(msp_gpios[(offset)] & 0x07)
@@ -260,32 +309,7 @@ static int add_children(struct i2c_client *client)
/* LED output */
if (msp_has_leds()) {
-#define GPIO_LED(l) .name = l, .active_low = true
- static struct gpio_led evm_leds[] = {
- { GPIO_LED("dm355evm::ds14"),
- .default_trigger = "heartbeat", },
- { GPIO_LED("dm355evm::ds15"),
- .default_trigger = "mmc0", },
- { GPIO_LED("dm355evm::ds16"),
- /* could also be a CE-ATA drive */
- .default_trigger = "mmc1", },
- { GPIO_LED("dm355evm::ds17"),
- .default_trigger = "nand-disk", },
- { GPIO_LED("dm355evm::ds18"), },
- { GPIO_LED("dm355evm::ds19"), },
- { GPIO_LED("dm355evm::ds20"), },
- { GPIO_LED("dm355evm::ds21"), },
- };
-#undef GPIO_LED
-
- struct gpio_led_platform_data evm_led_data = {
- .num_leds = ARRAY_SIZE(evm_leds),
- .leds = evm_leds,
- };
-
- for (i = 0; i < ARRAY_SIZE(evm_leds); i++)
- evm_leds[i].gpio = i + dm355evm_msp_gpio.base;
-
+ gpiod_add_lookup_table(&evm_leds_gpio_table);
/* NOTE: these are the only fully programmable LEDs
* on the board, since GPIO-61/ds22 (and many signals
* going to DC7) must be used for AEMIF address lines