Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for  Renesas RZ/G2L MTU3

  New Device Support:
   - Add support for Lenovo Yoga Book X90F to Intel CHT WC
   - Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
   - Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
   - Add support for AXP15060 PMIC to X-Powers PMIC collection

  Remove Device Support:
   - Remove support for Samsung 5M8751 and S5M8763 PMIC devices

  New Functionality:
   - Convert deprecated QCOM IRQ Chip to config registers
   - Add support for 32-bit address spaces to Renesas SMUs

  Fix-ups:
   - Make use of APIs / MACROs designed to simplify and demystify
   - Add / improve Device Tree bindings
   - Memory saving struct layout optimisations
   - Remove old / deprecated functionality
   - Factor out unassigned register addresses from ranges
   - Trivial: Spelling fixes, renames and coding style fixes
   - Rid 'defined but not used' warnings
   - Remove ineffective casts and pointer stubs

  Bug Fixes:
   - Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
   - Remove MODULE_*() helpers from non-tristate drivers
   - Do not attempt to use out-of-range memory addresses associated with io_base
   - Provide missing export helpers
   - Fix remap bulk read optimisation fallout
   - Fix memory leak issues in error paths"

* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
  dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
  leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
  dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
  mfd: axp20x: Add support for AXP15060 PMIC
  dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
  counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
  dt-bindings: mfd: dlg,da9063: Document voltage monitoring
  dt-bindings: mfd: stm32: Remove unnecessary blank lines
  dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
  dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
  MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  counter: Add Renesas RZ/G2L MTU3a counter driver
  Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  mfd: Add Renesas RZ/G2L MTU3a core driver
  dt-bindings: timer: Document RZ/G2L MTU3a bindings
  mfd: rsmu_i2c: Convert to i2c's .probe_new() again
  mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
  mfd: dln2: Fix memory leak in dln2_probe()
  mfd: axp20x: Fix axp288 writable-ranges
  ...

1 files changed, 7 insertions, 7 deletions

diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c
index f32f1fb93e37..c9a0ec084aa8 100644
--- a/drivers/mfd/si476x-cmd.c
+++ b/drivers/mfd/si476x-cmd.c
@@ -251,7 +251,7 @@ static int si476x_core_parse_and_nag_about_error(struct si476x_core *core)
  * @usecs:    amount of time to wait before reading the response (in
  *            usecs)
  *
- * Function returns 0 on succsess and negative error code on
+ * Function returns 0 on success and negative error code on
  * failure
  */
 static int si476x_core_send_command(struct si476x_core *core,
@@ -398,7 +398,7 @@ static int si476x_cmd_tune_seek_freq(struct si476x_core *core,
  * The command requests the firmware and patch version for currently
  * loaded firmware (dependent on the function of the device FM/AM/WB)
  *
- * Function returns 0 on succsess and negative error code on
+ * Function returns 0 on success and negative error code on
  * failure
  */
 int si476x_core_cmd_func_info(struct si476x_core *core,
@@ -429,7 +429,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_func_info);
  * @property: property address
  * @value:    property value
  *
- * Function returns 0 on succsess and negative error code on
+ * Function returns 0 on success and negative error code on
  * failure
  */
 int si476x_core_cmd_set_property(struct si476x_core *core,
@@ -545,13 +545,13 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_dig_audio_pin_cfg);
  *       SI476X_IQCLK_NOOP     - do not modify the behaviour
  *       SI476X_IQCLK_TRISTATE - put the pin in tristate condition,
  *                               enable 1MOhm pulldown
- *       SI476X_IQCLK_IQ       - set pin to be a part of I/Q interace
+ *       SI476X_IQCLK_IQ       - set pin to be a part of I/Q interface
  *                               in master mode
  * @iqfs: - IQFS pin function configuration:
  *       SI476X_IQFS_NOOP     - do not modify the behaviour
  *       SI476X_IQFS_TRISTATE - put the pin in tristate condition,
  *                              enable 1MOhm pulldown
- *       SI476X_IQFS_IQ       - set pin to be a part of I/Q interace
+ *       SI476X_IQFS_IQ       - set pin to be a part of I/Q interface
  *                              in master mode
  * @iout: - IOUT pin function configuration:
  *       SI476X_IOUT_NOOP     - do not modify the behaviour
@@ -589,7 +589,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_zif_pin_cfg);
 
 /**
  * si476x_core_cmd_ic_link_gpo_ctl_pin_cfg - send
- * 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device
+ * 'IC_LINK_GPIO_CTL_PIN_CFG' command to the device
  * @core: - device to send the command to
  * @icin: - ICIN pin function configuration:
  *      SI476X_ICIN_NOOP      - do not modify the behaviour
@@ -1014,7 +1014,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_diversity);
  * NOTE caller must hold core lock
  *
  * Function returns the value of the status bit in case of success and
- * negative error code in case of failre.
+ * negative error code in case of failure.
  */
 int si476x_core_cmd_fm_phase_div_status(struct si476x_core *core)
 {