summaryrefslogtreecommitdiff
path: root/drivers/mmc/card
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-09 19:39:39 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-09 19:39:39 +0400
commit97e18dc007546fce8e99098480b921a02ebb3037 (patch)
treef38c022d034e0172e83f6972983577f790f24dac /drivers/mmc/card
parent042f7b7cbd1e531278a09c449563165ba1f07673 (diff)
parentc67480173f72e883235dd0ad09d90156c8f87600 (diff)
downloadlinux-97e18dc007546fce8e99098480b921a02ebb3037.tar.xz
Merge tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
Diffstat (limited to 'drivers/mmc/card')
-rw-r--r--drivers/mmc/card/block.c181
1 files changed, 115 insertions, 66 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 7b5424f398ac..452782bffebc 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -415,8 +415,7 @@ static int ioctl_do_sanitize(struct mmc_card *card)
{
int err;
- if (!(mmc_can_sanitize(card) &&
- (card->host->caps2 & MMC_CAP2_SANITIZE))) {
+ if (!mmc_can_sanitize(card)) {
pr_warn("%s: %s - SANITIZE is not supported\n",
mmc_hostname(card->host), __func__);
err = -EOPNOTSUPP;
@@ -722,19 +721,6 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
return result;
}
-static int send_stop(struct mmc_card *card, u32 *status)
-{
- struct mmc_command cmd = {0};
- int err;
-
- cmd.opcode = MMC_STOP_TRANSMISSION;
- cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
- err = mmc_wait_for_cmd(card->host, &cmd, 5);
- if (err == 0)
- *status = cmd.resp[0];
- return err;
-}
-
static int get_card_status(struct mmc_card *card, u32 *status, int retries)
{
struct mmc_command cmd = {0};
@@ -750,6 +736,99 @@ static int get_card_status(struct mmc_card *card, u32 *status, int retries)
return err;
}
+static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
+ bool hw_busy_detect, struct request *req, int *gen_err)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+ int err = 0;
+ u32 status;
+
+ do {
+ err = get_card_status(card, &status, 5);
+ if (err) {
+ pr_err("%s: error %d requesting status\n",
+ req->rq_disk->disk_name, err);
+ return err;
+ }
+
+ if (status & R1_ERROR) {
+ pr_err("%s: %s: error sending status cmd, status %#x\n",
+ req->rq_disk->disk_name, __func__, status);
+ *gen_err = 1;
+ }
+
+ /* We may rely on the host hw to handle busy detection.*/
+ if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) &&
+ hw_busy_detect)
+ break;
+
+ /*
+ * Timeout if the device never becomes ready for data and never
+ * leaves the program state.
+ */
+ if (time_after(jiffies, timeout)) {
+ pr_err("%s: Card stuck in programming state! %s %s\n",
+ mmc_hostname(card->host),
+ req->rq_disk->disk_name, __func__);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * Some cards mishandle the status bits,
+ * so make sure to check both the busy
+ * indication and the card state.
+ */
+ } while (!(status & R1_READY_FOR_DATA) ||
+ (R1_CURRENT_STATE(status) == R1_STATE_PRG));
+
+ return err;
+}
+
+static int send_stop(struct mmc_card *card, unsigned int timeout_ms,
+ struct request *req, int *gen_err, u32 *stop_status)
+{
+ struct mmc_host *host = card->host;
+ struct mmc_command cmd = {0};
+ int err;
+ bool use_r1b_resp = rq_data_dir(req) == WRITE;
+
+ /*
+ * Normally we use R1B responses for WRITE, but in cases where the host
+ * has specified a max_busy_timeout we need to validate it. A failure
+ * means we need to prevent the host from doing hw busy detection, which
+ * is done by converting to a R1 response instead.
+ */
+ if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout))
+ use_r1b_resp = false;
+
+ cmd.opcode = MMC_STOP_TRANSMISSION;
+ if (use_r1b_resp) {
+ cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ cmd.busy_timeout = timeout_ms;
+ } else {
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ }
+
+ err = mmc_wait_for_cmd(host, &cmd, 5);
+ if (err)
+ return err;
+
+ *stop_status = cmd.resp[0];
+
+ /* No need to check card status in case of READ. */
+ if (rq_data_dir(req) == READ)
+ return 0;
+
+ if (!mmc_host_is_spi(host) &&
+ (*stop_status & R1_ERROR)) {
+ pr_err("%s: %s: general error sending stop command, resp %#x\n",
+ req->rq_disk->disk_name, __func__, *stop_status);
+ *gen_err = 1;
+ }
+
+ return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err);
+}
+
#define ERR_NOMEDIUM 3
#define ERR_RETRY 2
#define ERR_ABORT 1
@@ -866,26 +945,21 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
*/
if (R1_CURRENT_STATE(status) == R1_STATE_DATA ||
R1_CURRENT_STATE(status) == R1_STATE_RCV) {
- err = send_stop(card, &stop_status);
- if (err)
+ err = send_stop(card,
+ DIV_ROUND_UP(brq->data.timeout_ns, 1000000),
+ req, gen_err, &stop_status);
+ if (err) {
pr_err("%s: error %d sending stop command\n",
req->rq_disk->disk_name, err);
-
- /*
- * If the stop cmd also timed out, the card is probably
- * not present, so abort. Other errors are bad news too.
- */
- if (err)
+ /*
+ * If the stop cmd also timed out, the card is probably
+ * not present, so abort. Other errors are bad news too.
+ */
return ERR_ABORT;
+ }
+
if (stop_status & R1_CARD_ECC_FAILED)
*ecc_err = 1;
- if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
- if (stop_status & R1_ERROR) {
- pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
- req->rq_disk->disk_name, __func__,
- stop_status);
- *gen_err = 1;
- }
}
/* Check for set block count errors */
@@ -1157,8 +1231,7 @@ static int mmc_blk_err_check(struct mmc_card *card,
* program mode, which we have to wait for it to complete.
*/
if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
- u32 status;
- unsigned long timeout;
+ int err;
/* Check stop command response */
if (brq->stop.resp[0] & R1_ERROR) {
@@ -1168,39 +1241,10 @@ static int mmc_blk_err_check(struct mmc_card *card,
gen_err = 1;
}
- timeout = jiffies + msecs_to_jiffies(MMC_BLK_TIMEOUT_MS);
- do {
- int err = get_card_status(card, &status, 5);
- if (err) {
- pr_err("%s: error %d requesting status\n",
- req->rq_disk->disk_name, err);
- return MMC_BLK_CMD_ERR;
- }
-
- if (status & R1_ERROR) {
- pr_err("%s: %s: general error sending status command, card status %#x\n",
- req->rq_disk->disk_name, __func__,
- status);
- gen_err = 1;
- }
-
- /* Timeout if the device never becomes ready for data
- * and never leaves the program state.
- */
- if (time_after(jiffies, timeout)) {
- pr_err("%s: Card stuck in programming state!"\
- " %s %s\n", mmc_hostname(card->host),
- req->rq_disk->disk_name, __func__);
-
- return MMC_BLK_CMD_ERR;
- }
- /*
- * Some cards mishandle the status bits,
- * so make sure to check both the busy
- * indication and the card state.
- */
- } while (!(status & R1_READY_FOR_DATA) ||
- (R1_CURRENT_STATE(status) == R1_STATE_PRG));
+ err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req,
+ &gen_err);
+ if (err)
+ return MMC_BLK_CMD_ERR;
}
/* if general error occurs, retry the write operation. */
@@ -1335,7 +1379,6 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
brq->data.blksz = 512;
brq->stop.opcode = MMC_STOP_TRANSMISSION;
brq->stop.arg = 0;
- brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
brq->data.blocks = blk_rq_sectors(req);
/*
@@ -1378,9 +1421,15 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
if (rq_data_dir(req) == READ) {
brq->cmd.opcode = readcmd;
brq->data.flags |= MMC_DATA_READ;
+ if (brq->mrq.stop)
+ brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
+ MMC_CMD_AC;
} else {
brq->cmd.opcode = writecmd;
brq->data.flags |= MMC_DATA_WRITE;
+ if (brq->mrq.stop)
+ brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
+ MMC_CMD_AC;
}
if (do_rel_wr)