Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 2 insertions, 66 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 5e19a961c34d..e13b0b0b8ebb 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -262,17 +262,6 @@ config MMC_SDHCI_CADENCE
 
 	  If unsure, say N.
 
-config MMC_SDHCI_CNS3XXX
-	tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
-	depends on ARCH_CNS3XXX || COMPILE_TEST
-	depends on MMC_SDHCI_PLTFM
-	help
-	  This selects the SDHCI support for CNS3xxx System-on-Chip devices.
-
-	  If you have a controller with this interface, say Y or M here.
-
-	  If unsure, say N.
-
 config MMC_SDHCI_ESDHC_MCF
 	tristate "SDHCI support for the Freescale eSDHC ColdFire controller"
 	depends on M5441x
@@ -332,9 +321,8 @@ config MMC_SDHCI_S3C
 	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
-	  often referrered to as the HSMMC block in some of the Samsung S3C
-	  (S3C2416, S3C2443, S3C6410), S5Pv210 and Exynos (Exynso4210,
-	  Exynos4412) SoCs.
+	  often referrered to as the HSMMC block in some of the Samsung
+	  S3C6410, S5Pv210 and Exynos (Exynso4210, Exynos4412) SoCs.
 
 	  If you have a controller with this interface (thereforeyou build for
 	  such Samsung SoC), say Y or M here.
@@ -500,7 +488,6 @@ config MMC_SDHCI_ST
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
-	depends on TPS65010 || !MACH_OMAP_H2
 	help
 	  This selects the TI OMAP Multimedia card Interface.
 	  If you have an OMAP board with a Multimedia Card slot,
@@ -640,49 +627,6 @@ config MMC_SPI
 
 	  If unsure, or if your system has no SPI master driver, say N.
 
-config MMC_S3C
-	tristate "Samsung S3C SD/MMC Card Interface support"
-	depends on ARCH_S3C24XX || COMPILE_TEST
-	depends on S3C24XX_DMAC || COMPILE_TEST
-	help
-	  This selects a driver for the MCI interface found in
-	  Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
-	  If you have a board based on one of those and a MMC/SD
-	  slot, say Y or M here.
-
-	  If unsure, say N.
-
-config MMC_S3C_HW_SDIO_IRQ
-	bool "Hardware support for SDIO IRQ"
-	depends on MMC_S3C
-	help
-	  Enable the hardware support for SDIO interrupts instead of using
-	  the generic polling code.
-
-choice
-	prompt "Samsung S3C SD/MMC transfer code"
-	depends on MMC_S3C
-
-config MMC_S3C_PIO
-	bool "Use PIO transfers only"
-	help
-	  Use PIO to transfer data between memory and the hardware.
-
-	  PIO is slower than DMA as it requires CPU instructions to
-	  move the data. This has been the traditional default for
-	  the S3C MCI driver.
-
-config MMC_S3C_DMA
-	bool "Use DMA transfers only"
-	help
-	  Use DMA to transfer data between memory and the hardware.
-
-	  Currently, the DMA support in this driver seems to not be
-	  working properly and needs to be debugged before this
-	  option is useful.
-
-endchoice
-
 config MMC_SDRICOH_CS
 	tristate "MMC/SD driver for Ricoh Bay1Controllers"
 	depends on PCI && PCMCIA
@@ -710,14 +654,6 @@ config MMC_SDHCI_SPRD
 config MMC_TMIO_CORE
 	tristate
 
-config MMC_TMIO
-	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
-	depends on MFD_TMIO || MFD_ASIC3 || COMPILE_TEST
-	select MMC_TMIO_CORE
-	help
-	  This provides support for the SD/MMC cell found in TC6393XB,
-	  T7L66XB and also HTC ASIC3
-
 config MMC_SDHI
 	tristate "Renesas SDHI SD/SDIO controller support"
 	depends on SUPERH || ARCH_RENESAS || COMPILE_TEST