diff options
author | Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com> | 2023-08-25 12:51:57 +0300 |
---|---|---|
committer | Ulf Hansson <ulf.hansson@linaro.org> | 2023-08-25 14:40:21 +0300 |
commit | 98ac9e4fc07f101c435f1ab6b395b6245b096a68 (patch) | |
tree | 5b65240da2eff68bb9e8f562913faf4be55c251c /drivers/mmc | |
parent | d2c6d518c21d73d96616e08a19eccd4642f4bafa (diff) | |
download | linux-98ac9e4fc07f101c435f1ab6b395b6245b096a68.tar.xz |
mmc: atmel-mci: Move card detect gpio polarity quirk to gpiolib
The polarity of the card detection gpio is handled by the "cd-inverted"
property in the device tree. Move this inversion logic to gpiolib to avoid
reading the gpio raw value.
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825095157.76073-4-balamanikandan.gunasundar@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/host/atmel-mci.c | 33 |
1 files changed, 15 insertions, 18 deletions
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 6f815818dd22..535783c43105 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -206,7 +206,6 @@ enum atmci_pdc_buf { * @bus_width: Number of data lines wired up the slot * @detect_pin: GPIO pin wired to the card detect switch * @wp_pin: GPIO pin wired to the write protect sensor - * @detect_is_active_high: The state of the detect pin when it is active * @non_removable: The slot is not removable, only detect once * * If a given slot is not present on the board, @bus_width should be @@ -222,7 +221,6 @@ struct mci_slot_pdata { unsigned int bus_width; struct gpio_desc *detect_pin; struct gpio_desc *wp_pin; - bool detect_is_active_high; bool non_removable; }; @@ -405,7 +403,6 @@ struct atmel_mci { * available. * @wp_pin: GPIO pin used for card write protect sending, or negative * if not available. - * @detect_is_active_high: The state of the detect pin when it is active. * @detect_timer: Timer used for debouncing @detect_pin interrupts. */ struct atmel_mci_slot { @@ -426,7 +423,6 @@ struct atmel_mci_slot { struct gpio_desc *detect_pin; struct gpio_desc *wp_pin; - bool detect_is_active_high; struct timer_list detect_timer; }; @@ -644,6 +640,7 @@ atmci_of_init(struct platform_device *pdev) struct device_node *cnp; struct mci_platform_data *pdata; u32 slot_id; + int err; if (!np) { dev_err(&pdev->dev, "device node not found\n"); @@ -675,11 +672,12 @@ atmci_of_init(struct platform_device *pdev) pdata->slot[slot_id].detect_pin = devm_fwnode_gpiod_get(&pdev->dev, of_fwnode_handle(cnp), "cd", GPIOD_IN, "cd-gpios"); - if (IS_ERR(pdata->slot[slot_id].detect_pin)) + err = PTR_ERR_OR_ZERO(pdata->slot[slot_id].detect_pin); + if (err) { + if (err != -ENOENT) + return ERR_PTR(err); pdata->slot[slot_id].detect_pin = NULL; - - pdata->slot[slot_id].detect_is_active_high = - of_property_read_bool(cnp, "cd-inverted"); + } pdata->slot[slot_id].non_removable = of_property_read_bool(cnp, "non-removable"); @@ -687,8 +685,12 @@ atmci_of_init(struct platform_device *pdev) pdata->slot[slot_id].wp_pin = devm_fwnode_gpiod_get(&pdev->dev, of_fwnode_handle(cnp), "wp", GPIOD_IN, "wp-gpios"); - if (IS_ERR(pdata->slot[slot_id].wp_pin)) + err = PTR_ERR_OR_ZERO(pdata->slot[slot_id].wp_pin); + if (err) { + if (err != -ENOENT) + return ERR_PTR(err); pdata->slot[slot_id].wp_pin = NULL; + } } return pdata; @@ -1566,8 +1568,7 @@ static int atmci_get_cd(struct mmc_host *mmc) struct atmel_mci_slot *slot = mmc_priv(mmc); if (slot->detect_pin) { - present = !(gpiod_get_raw_value(slot->detect_pin) ^ - slot->detect_is_active_high); + present = gpiod_get_value_cansleep(slot->detect_pin); dev_dbg(&mmc->class_dev, "card is %spresent\n", present ? "" : "not "); } @@ -1680,8 +1681,7 @@ static void atmci_detect_change(struct timer_list *t) return; enable_irq(gpiod_to_irq(slot->detect_pin)); - present = !(gpiod_get_raw_value(slot->detect_pin) ^ - slot->detect_is_active_high); + present = gpiod_get_value_cansleep(slot->detect_pin); present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags); dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n", @@ -2272,7 +2272,6 @@ static int atmci_init_slot(struct atmel_mci *host, slot->host = host; slot->detect_pin = slot_data->detect_pin; slot->wp_pin = slot_data->wp_pin; - slot->detect_is_active_high = slot_data->detect_is_active_high; slot->sdc_reg = sdc_reg; slot->sdio_irq = sdio_irq; @@ -2280,7 +2279,7 @@ static int atmci_init_slot(struct atmel_mci *host, "slot[%u]: bus_width=%u, detect_pin=%d, " "detect_is_active_high=%s, wp_pin=%d\n", id, slot_data->bus_width, desc_to_gpio(slot_data->detect_pin), - slot_data->detect_is_active_high ? "true" : "false", + !gpiod_is_active_low(slot_data->detect_pin) ? "true" : "false", desc_to_gpio(slot_data->wp_pin)); mmc->ops = &atmci_ops; @@ -2318,10 +2317,8 @@ static int atmci_init_slot(struct atmel_mci *host, /* Assume card is present initially */ set_bit(ATMCI_CARD_PRESENT, &slot->flags); if (slot->detect_pin) { - if (gpiod_get_raw_value(slot->detect_pin) ^ - slot->detect_is_active_high) { + if (!gpiod_get_value_cansleep(slot->detect_pin)) clear_bit(ATMCI_CARD_PRESENT, &slot->flags); - } } else { dev_dbg(&mmc->class_dev, "no detect pin available\n"); } |