summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
authorPierre Ossman <drzeus@drzeus.cx>2006-06-30 13:22:26 +0400
committerRussell King <rmk+kernel@arm.linux.org.uk>2006-07-02 19:02:05 +0400
commit3192a28f7d34ea8f1d0fef8ca5bc0314b5b5bb19 (patch)
tree8e10e81299096729254d87cb1b7aba94a150c84d /drivers/mmc
parentc7fa9963ee6317b54e85b260791d603ea2feb8e3 (diff)
downloadlinux-3192a28f7d34ea8f1d0fef8ca5bc0314b5b5bb19.tar.xz
[MMC] sdhci: fix interrupt handling
The specification says that interrupts should be cleared before the source is removed. We should also not set unknown bits. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/sdhci.c80
1 files changed, 24 insertions, 56 deletions
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 445788159647..b9aa60aed7f0 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -124,7 +124,12 @@ static void sdhci_init(struct sdhci_host *host)
sdhci_reset(host, SDHCI_RESET_ALL);
- intmask = ~(SDHCI_INT_CARD_INT | SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
+ intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
+ SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
+ SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
+ SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
+ SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL |
+ SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
@@ -360,7 +365,6 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
- u32 intmask;
u16 blocks;
BUG_ON(!host->data);
@@ -371,14 +375,6 @@ static void sdhci_finish_data(struct sdhci_host *host)
if (host->flags & SDHCI_USE_DMA) {
pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
(data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
- } else {
- intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
- intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
- writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
- intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
- writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
}
/*
@@ -512,31 +508,9 @@ static void sdhci_finish_command(struct sdhci_host *host)
DBG("Ending cmd (%x)\n", host->cmd->opcode);
- if (host->cmd->data) {
- u32 intmask;
-
+ if (host->cmd->data)
host->data = host->cmd->data;
-
- if (!(host->flags & SDHCI_USE_DMA)) {
- /*
- * Don't enable the interrupts until now to make sure we
- * get stable handling of the FIFO.
- */
- intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
- intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
- writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
-
- intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
- intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
- writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- /*
- * The buffer interrupts are to unreliable so we
- * start the transfer immediatly.
- */
- sdhci_transfer_pio(host);
- }
- } else
+ else
tasklet_schedule(&host->finish_tasklet);
host->cmd = NULL;
@@ -914,50 +888,44 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id, struct pt_regs *regs)
DBG("*** %s got interrupt: 0x%08x\n", host->slot_descr, intmask);
- if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE))
+ if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+ writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
+ host->ioaddr + SDHCI_INT_STATUS);
tasklet_schedule(&host->card_tasklet);
+ }
- if (intmask & SDHCI_INT_CMD_MASK) {
- sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
+ intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
+ if (intmask & SDHCI_INT_CMD_MASK) {
writel(intmask & SDHCI_INT_CMD_MASK,
host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
}
if (intmask & SDHCI_INT_DATA_MASK) {
- sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
-
writel(intmask & SDHCI_INT_DATA_MASK,
host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
}
intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
- if (intmask & SDHCI_INT_CARD_INT) {
- printk(KERN_ERR "%s: Unexpected card interrupt. Please "
- "report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
- }
-
if (intmask & SDHCI_INT_BUS_POWER) {
- printk(KERN_ERR "%s: Unexpected bus power interrupt. Please "
- "report this to " BUGMAIL ".\n",
+ printk(KERN_ERR "%s: Card is consuming too much power!\n",
mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
+ writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
}
- if (intmask & SDHCI_INT_ACMD12ERR) {
- printk(KERN_ERR "%s: Unexpected auto CMD12 error. Please "
+ intmask &= SDHCI_INT_BUS_POWER;
+
+ if (intmask) {
+ printk(KERN_ERR "%s: Unexpected interrupt 0x%08x. Please "
"report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
+ mmc_hostname(host->mmc), intmask);
sdhci_dumpregs(host);
- writew(~0, host->ioaddr + SDHCI_ACMD12_ERR);
- }
-
- if (intmask)
writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
+ }
result = IRQ_HANDLED;