summaryrefslogtreecommitdiff
path: root/drivers/mtd/devices/pmc551.c
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2005-11-07 14:15:40 +0300
committerThomas Gleixner <tglx@mtd.linutronix.de>2005-11-07 17:06:59 +0300
commite5580fbe8a950131b9ccccce0f962811dfb9ef43 (patch)
treed7558eea2208a7b8fbc83c9a94f588b67aa5a3cc /drivers/mtd/devices/pmc551.c
parent69f34c98c1416eb74c55e38a21dbf3e294966514 (diff)
downloadlinux-e5580fbe8a950131b9ccccce0f962811dfb9ef43.tar.xz
[MTD] devices: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'drivers/mtd/devices/pmc551.c')
-rw-r--r--drivers/mtd/devices/pmc551.c24
1 files changed, 12 insertions, 12 deletions
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index 5b3defadf884..de48b35f5609 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -1,5 +1,5 @@
/*
- * $Id: pmc551.c,v 1.30 2005/01/05 18:05:13 dwmw2 Exp $
+ * $Id: pmc551.c,v 1.32 2005/11/07 11:14:25 gleixner Exp $
*
* PMC551 PCI Mezzanine Ram Device
*
@@ -27,7 +27,7 @@
* it as high speed swap or for a high speed disk device of some
* sort. Which becomes very useful on diskless systems in the
* embedded market I might add.
- *
+ *
* Notes:
* Due to what I assume is more buggy SROM, the 64M PMC551 I
* have available claims that all 4 of it's DRAM banks have 64M
@@ -63,10 +63,10 @@
* Minyard set up the card to utilize a 1M sliding apature.
*
* Corey Minyard <minyard@nortelnetworks.com>
- * * Modified driver to utilize a sliding aperture instead of
+ * * Modified driver to utilize a sliding aperture instead of
* mapping all memory into kernel space which turned out to
* be very wasteful.
- * * Located a bug in the SROM's initialization sequence that
+ * * Located a bug in the SROM's initialization sequence that
* made the memory unusable, added a fix to code to touch up
* the DRAM some.
*
@@ -390,7 +390,7 @@ static u32 fixup_pmc551 (struct pci_dev *dev)
bcmd |= (0x40|0x20);
pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
- /*
+ /*
* Take care and turn off the memory on the device while we
* tweak the configurations
*/
@@ -408,7 +408,7 @@ static u32 fixup_pmc551 (struct pci_dev *dev)
* Grab old BAR0 config so that we can figure out memory size
* This is another bit of kludge going on. The reason for the
* redundancy is I am hoping to retain the original configuration
- * previously assigned to the card by the BIOS or some previous
+ * previously assigned to the card by the BIOS or some previous
* fixup routine in the kernel. So we read the old config into cfg,
* then write all 1's to the memory space, read back the result into
* "size", and then write back all the old config.
@@ -480,7 +480,7 @@ static u32 fixup_pmc551 (struct pci_dev *dev)
} while ( (PCI_COMMAND_IO) & cmd );
/*
- * Turn on auto refresh
+ * Turn on auto refresh
* The loop is taken directly from Ramix's example code. I assume that
* this must be held high for some duration of time, but I can find no
* documentation refrencing the reasons why.
@@ -615,7 +615,7 @@ static u32 fixup_pmc551 (struct pci_dev *dev)
pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd );
printk( KERN_DEBUG "pmc551: EEPROM is under %s control\n"
"pmc551: System Control Register is %slocked to PCI access\n"
- "pmc551: System Control Register is %slocked to EEPROM access\n",
+ "pmc551: System Control Register is %slocked to EEPROM access\n",
(bcmd&0x1)?"software":"hardware",
(bcmd&0x20)?"":"un", (bcmd&0x40)?"":"un");
#endif
@@ -744,7 +744,7 @@ static int __init init_pmc551(void)
priv->start = ioremap(((PCI_Device->resource[0].start)
& PCI_BASE_ADDRESS_MEM_MASK),
priv->asize);
-
+
if (!priv->start) {
printk(KERN_NOTICE "pmc551: Unable to map IO space\n");
kfree(mtd->priv);
@@ -765,7 +765,7 @@ static int __init init_pmc551(void)
priv->curr_map0 );
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk( KERN_DEBUG "pmc551: aperture set to %d\n",
+ printk( KERN_DEBUG "pmc551: aperture set to %d\n",
(priv->base_map0 & 0xF0)>>4 );
#endif
@@ -823,13 +823,13 @@ static void __exit cleanup_pmc551(void)
while((mtd=pmc551list)) {
priv = mtd->priv;
pmc551list = priv->nextpmc551;
-
+
if(priv->start) {
printk (KERN_DEBUG "pmc551: unmapping %dM starting at 0x%p\n",
priv->asize>>20, priv->start);
iounmap (priv->start);
}
-
+
kfree (mtd->priv);
del_mtd_device (mtd);
kfree (mtd);