Merge tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "MTD core changes:
   - Fix issue where write_cached_data() fails but write() still returns
     success

   - maps: sa1100-flash: Replace zero-length array with flexible-array
     member

   - phram: Fix a double free issue in error path

   - Convert fallthrough comments into statements

   - MAINTAINERS: Add the IRC channel to the MTD related subsystems

  Raw NAND core changes:
   - Add support for manufacturer specific suspend/resume operation

   - Add support for manufacturer specific lock/unlock operation

   - Replace zero-length array with flexible-array member

   - Fix a typo ("manufecturer")

   - Ensure nand_soft_waitrdy wait period is enough

  Raw NAND controller driver changes:
   - Brcmnand:
       * Add support for flash-edu for dma transfers (+ bindings)

   - Cadence:
       * Reinit completion before executing a new command
       * Change bad block marker size
       * Fix the calculation of the avaialble OOB size
       * Get meta data size from registers

   - Qualcom:
       * Use dma_request_chan() instead dma_request_slave_channel()
       * Release resources on failure within qcom_nandc_alloc()

   - Allwinner:
       * Use dma_request_chan() instead dma_request_slave_channel()

   - Marvell:
       * Use dma_request_chan() instead dma_request_slave_channel()
       * Release DMA channel on error

   - Freescale:
       * Use dma_request_chan() instead dma_request_slave_channel()

   - Macronix:
       * Add support for Macronix NAND randomizer (+ bindings)

   - Ams-delta:
       * Rename structures and functions to gpio_nand*
       * Make the driver custom I/O ready
       * Drop useless local variable
       * Support custom driver initialisation
       * Add module device tables
       * Handle more GPIO pins as optional
       * Make read pulses optional
       * Don't hardcode read/write pulse widths
       * Push inversion handling to gpiolib
       * Enable OF partition info support
       * Drop board specific partition info
       * Use struct gpio_nand_platdata
       * Write protect device during probe

   - Ingenic:
       * Use devm_platform_ioremap_resource()
       * Add dependency on MIPS || COMPILE_TEST

   - Denali:
       * Deassert write protect pin

   - ST:
       * Use dma_request_chan() instead dma_request_slave_channel()

  Raw NAND chip driver changes:
   - Toshiba:
       * Support reading the number of bitflips for BENAND (Built-in ECC NAND)

   - Macronix:
       * Add support for deep power down mode
       * Add support for block protection

  SPI-NAND core changes:
   - Do not erase the block before writing a bad block marker

   - Explicitly use MTD_OPS_RAW to write the bad block marker to OOB

   - Stop using spinand->oobbuf for buffering bad block markers

   - Rework detect procedure for different READ_ID operation

  SPI-NAND driver changes:
   - Toshiba:
       * Support for new Kioxia Serial NAND
       * Rename function name to change suffix and prefix (8Gbit)
       * Add comment about Kioxia ID

   - Micron:
       * Add new Micron SPI NAND devices with multiple dies
       * Add M70A series Micron SPI NAND devices
       * identify SPI NAND device with Continuous Read mode
       * Add new Micron SPI NAND devices
       * Describe the SPI NAND device MT29F2G01ABAGD
       * Generalize the OOB layout structure and function names

  SPI NOR core changes:
   - Move all the manufacturer specific quirks/code out of the core, to
     make the core logic more readable and thus ease maintenance.

   - Move the SFDP logic out of the core, it provides a better
     separation between the SFDP parsing and core logic.

   - Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers
     must not be able to use structures that are meant just for the SPI
     NOR core.

   - Use the spi-mem direct mapping API to let advanced controllers
     optimize the read/write operations when they support direct
     mapping.

   - Add generic formula for the Status Register block protection
     handling. It fixes some long standing locking limitations and eases
     the addition of the 4bit block protection support.

   - Add block protection support for flashes with 4 block protection
     bits in the Status Register.

  SPI NOR controller drivers changes:
   - The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor
     driver.

   - Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts.

  HyperBus changes:
   - Print error msg when compatible is wrong or missing

   - Move mapping of direct access window from core to individual
     drivers"

* tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (103 commits)
  mtd: Convert fallthrough comments into statements
  mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND)
  MAINTAINERS: Add the IRC channel to the MTD related subsystems
  mtd: Fix issue where write_cached_data() fails but write() still returns success
  mtd: maps: sa1100-flash: Replace zero-length array with flexible-array member
  mtd: phram: fix a double free issue in error path
  mtd: spinand: toshiba: Support for new Kioxia Serial NAND
  mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit)
  mtd: rawnand: macronix: Add support for deep power down mode
  mtd: rawnand: Add support for manufacturer specific suspend/resume operation
  mtd: spi-nor: Enable locking for n25q512ax3/n25q512a
  mtd: spi-nor: Add SR 4bit block protection support
  mtd: spi-nor: Add generic formula for SR block protection handling
  mtd: spi-nor: Set all BP bits to one when lock_len == mtd->size
  mtd: spi-nor: controllers: aspeed-smc: Replace zero-length array with flexible-array member
  mtd: spi-nor: Clear WEL bit when erase or program errors occur
  MAINTAINERS: update entry after SPI NOR controller move
  mtd: spi-nor: Trim what is exposed in spi-nor.h
  mtd: spi-nor: Drop the MFR definitions
  mtd: spi-nor: Get rid of the now empty spi_nor_ids[] table
  ...

1 files changed, 98 insertions, 0 deletions

diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
new file mode 100644
index 000000000000..ab0f963d630c
--- /dev/null
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static int
+mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
+			    const struct sfdp_parameter_header *bfpt_header,
+			    const struct sfdp_bfpt *bfpt,
+			    struct spi_nor_flash_parameter *params)
+{
+	/*
+	 * MX25L25635F supports 4B opcodes but MX25L25635E does not.
+	 * Unfortunately, Macronix has re-used the same JEDEC ID for both
+	 * variants which prevents us from defining a new entry in the parts
+	 * table.
+	 * We need a way to differentiate MX25L25635E and MX25L25635F, and it
+	 * seems that the F version advertises support for Fast Read 4-4-4 in
+	 * its BFPT table.
+	 */
+	if (bfpt->dwords[BFPT_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4)
+		nor->flags |= SNOR_F_4B_OPCODES;
+
+	return 0;
+}
+
+static struct spi_nor_fixups mx25l25635_fixups = {
+	.post_bfpt = mx25l25635_post_bfpt_fixups,
+};
+
+static const struct flash_info macronix_parts[] = {
+	/* Macronix */
+	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
+	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
+	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
+	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
+	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
+	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
+	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
+	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
+	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
+	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
+	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+	{ "mx25r3235f",  INFO(0xc22816, 0, 64 * 1024,  64,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		.fixups = &mx25l25635_fixups },
+	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
+			      SECT_4K | SPI_NOR_4B_OPCODES) },
+	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      SPI_NOR_4B_OPCODES) },
+	{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048,
+			      SPI_NOR_QUAD_READ) },
+};
+
+static void macronix_default_init(struct spi_nor *nor)
+{
+	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+	nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode;
+}
+
+static const struct spi_nor_fixups macronix_fixups = {
+	.default_init = macronix_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_macronix = {
+	.name = "macronix",
+	.parts = macronix_parts,
+	.nparts = ARRAY_SIZE(macronix_parts),
+	.fixups = &macronix_fixups,
+};