summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-02 05:46:13 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-02 05:46:13 +0400
commit8f446a7a069e0af0639385f67c78ee2279bca04c (patch)
tree580cf495616b36ca0af0826afa87c430cdc1e7cb /drivers/mtd
parent84be4ae2c038e2b03d650cbf2a7cfd9e8d6e9e51 (diff)
parent04ef037c926ddb31088c976538e29eada4fd1490 (diff)
downloadlinux-8f446a7a069e0af0639385f67c78ee2279bca04c.tar.xz
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/Kconfig40
1 files changed, 0 insertions, 40 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 8ca417614c57..598cd0a3adee 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -406,46 +406,6 @@ config MTD_NAND_ATMEL
help
Enables support for NAND Flash / Smart Media Card interface
on Atmel AT91 and AVR32 processors.
-choice
- prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
- depends on MTD_NAND_ATMEL
-
-config MTD_NAND_ATMEL_ECC_HW
- bool "Hardware ECC"
- depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
- help
- Use hardware ECC instead of software ECC when the chip
- supports it.
-
- The hardware ECC controller is capable of single bit error
- correction and 2-bit random detection per page.
-
- NB : hardware and software ECC schemes are incompatible.
- If you switch from one to another, you'll have to erase your
- mtd partition.
-
- If unsure, say Y
-
-config MTD_NAND_ATMEL_ECC_SOFT
- bool "Software ECC"
- help
- Use software ECC.
-
- NB : hardware and software ECC schemes are incompatible.
- If you switch from one to another, you'll have to erase your
- mtd partition.
-
-config MTD_NAND_ATMEL_ECC_NONE
- bool "No ECC (testing only, DANGEROUS)"
- depends on DEBUG_KERNEL
- help
- No ECC will be used.
- It's not a good idea and it should be reserved for testing
- purpose only.
-
- If unsure, say N
-
-endchoice
config MTD_NAND_PXA3xx
tristate "Support for NAND flash devices on PXA3xx"