summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
authorEzequiel GarcĂ­a <ezequiel@vanguardiasur.com.ar>2014-09-20 20:53:12 +0400
committerBrian Norris <computersforpeace@gmail.com>2014-09-22 22:37:51 +0400
commit93af53b8633c4cb474585158512182b21219d743 (patch)
treeed913991563b48f45a45096fe535325be297ff35 /drivers/mtd
parent2a960cce03d1dbd3dba54e660c479f64674eb5e3 (diff)
downloadlinux-93af53b8633c4cb474585158512182b21219d743.tar.xz
nand: omap2: Remove horrible ifdefs to fix module probe
The current code abuses ifdefs to determine if the selected ECC scheme is supported by the running kernel. As a result the code is hard to read, and it also fails to load as a module. This commit removes all the ifdefs and instead introduces a function omap2_nand_ecc_check() to check if the ECC is supported by using IS_ENABLED(CONFIG_xxx). Since IS_ENABLED() is true when a config is =y or =m, this change fixes the module so it can be loaded with no issues. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/omap2.c130
1 files changed, 71 insertions, 59 deletions
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index e1a9b310c159..f97a4ffd489d 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -136,7 +136,6 @@
#define BADBLOCK_MARKER_LENGTH 2
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
static u_char bch16_vector[] = {0xf5, 0x24, 0x1c, 0xd0, 0x61, 0xb3, 0xf1, 0x55,
0x2e, 0x2c, 0x86, 0xa3, 0xed, 0x36, 0x1b, 0x78,
0x48, 0x76, 0xa9, 0x3b, 0x97, 0xd1, 0x7a, 0x93,
@@ -144,7 +143,6 @@ static u_char bch16_vector[] = {0xf5, 0x24, 0x1c, 0xd0, 0x61, 0xb3, 0xf1, 0x55,
static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
0xac, 0x6b, 0xff, 0x99, 0x7b};
static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
-#endif
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
@@ -1292,7 +1290,6 @@ static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
return 0;
}
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
/**
* erased_sector_bitflips - count bit flips
* @data: data sector buffer
@@ -1593,33 +1590,71 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
/**
* is_elm_present - checks for presence of ELM module by scanning DT nodes
* @omap_nand_info: NAND device structure containing platform data
- * @bch_type: 0x0=BCH4, 0x1=BCH8, 0x2=BCH16
*/
-static int is_elm_present(struct omap_nand_info *info,
- struct device_node *elm_node, enum bch_ecc bch_type)
+static bool is_elm_present(struct omap_nand_info *info,
+ struct device_node *elm_node)
{
struct platform_device *pdev;
- struct nand_ecc_ctrl *ecc = &info->nand.ecc;
- int err;
+
/* check whether elm-id is passed via DT */
if (!elm_node) {
pr_err("nand: error: ELM DT node not found\n");
- return -ENODEV;
+ return false;
}
pdev = of_find_device_by_node(elm_node);
/* check whether ELM device is registered */
if (!pdev) {
pr_err("nand: error: ELM device not found\n");
- return -ENODEV;
+ return false;
}
/* ELM module available, now configure it */
info->elm_dev = &pdev->dev;
- err = elm_config(info->elm_dev, bch_type,
- (info->mtd.writesize / ecc->size), ecc->size, ecc->bytes);
+ return true;
+}
- return err;
+static bool omap2_nand_ecc_check(struct omap_nand_info *info,
+ struct omap_nand_platform_data *pdata)
+{
+ bool ecc_needs_bch, ecc_needs_omap_bch, ecc_needs_elm;
+
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ ecc_needs_omap_bch = false;
+ ecc_needs_bch = true;
+ ecc_needs_elm = false;
+ break;
+ case OMAP_ECC_BCH4_CODE_HW:
+ case OMAP_ECC_BCH8_CODE_HW:
+ case OMAP_ECC_BCH16_CODE_HW:
+ ecc_needs_omap_bch = true;
+ ecc_needs_bch = false;
+ ecc_needs_elm = true;
+ break;
+ default:
+ ecc_needs_omap_bch = false;
+ ecc_needs_bch = false;
+ ecc_needs_elm = false;
+ break;
+ }
+
+ if (ecc_needs_bch && !IS_ENABLED(CONFIG_MTD_NAND_ECC_BCH)) {
+ dev_err(&info->pdev->dev,
+ "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+ return false;
+ }
+ if (ecc_needs_omap_bch && !IS_ENABLED(CONFIG_MTD_NAND_OMAP_BCH)) {
+ dev_err(&info->pdev->dev,
+ "CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
+ return false;
+ }
+ if (ecc_needs_elm && !is_elm_present(info, pdata->elm_of_node)) {
+ dev_err(&info->pdev->dev, "ELM not available\n");
+ return false;
+ }
+
+ return true;
}
-#endif /* CONFIG_MTD_NAND_ECC_BCH */
static int omap_nand_probe(struct platform_device *pdev)
{
@@ -1797,6 +1832,11 @@ static int omap_nand_probe(struct platform_device *pdev)
goto return_error;
}
+ if (!omap2_nand_ecc_check(info, pdata)) {
+ err = -EINVAL;
+ goto return_error;
+ }
+
/* populate MTD interface based on ECC scheme */
ecclayout = &omap_oobinfo;
switch (info->ecc_opt) {
@@ -1829,7 +1869,6 @@ static int omap_nand_probe(struct platform_device *pdev)
break;
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
-#ifdef CONFIG_MTD_NAND_ECC_BCH
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.size = 512;
@@ -1861,14 +1900,8 @@ static int omap_nand_probe(struct platform_device *pdev)
err = -EINVAL;
}
break;
-#else
- pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n");
- err = -EINVAL;
- goto return_error;
-#endif
case OMAP_ECC_BCH4_CODE_HW:
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.size = 512;
@@ -1890,21 +1923,15 @@ static int omap_nand_probe(struct platform_device *pdev)
/* reserved marker already included in ecclayout->eccbytes */
ecclayout->oobfree->offset =
ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
- /* This ECC scheme requires ELM H/W block */
- if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) {
- pr_err("nand: error: could not initialize ELM\n");
- err = -ENODEV;
+
+ err = elm_config(info->elm_dev, BCH4_ECC,
+ info->mtd.writesize / nand_chip->ecc.size,
+ nand_chip->ecc.size, nand_chip->ecc.bytes);
+ if (err < 0)
goto return_error;
- }
break;
-#else
- pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
- err = -EINVAL;
- goto return_error;
-#endif
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
-#ifdef CONFIG_MTD_NAND_ECC_BCH
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.size = 512;
@@ -1937,14 +1964,8 @@ static int omap_nand_probe(struct platform_device *pdev)
goto return_error;
}
break;
-#else
- pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n");
- err = -EINVAL;
- goto return_error;
-#endif
case OMAP_ECC_BCH8_CODE_HW:
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.size = 512;
@@ -1956,12 +1977,13 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.calculate = omap_calculate_ecc_bch;
nand_chip->ecc.read_page = omap_read_page_bch;
nand_chip->ecc.write_page = omap_write_page_bch;
- /* This ECC scheme requires ELM H/W block */
- err = is_elm_present(info, pdata->elm_of_node, BCH8_ECC);
- if (err < 0) {
- pr_err("nand: error: could not initialize ELM\n");
+
+ err = elm_config(info->elm_dev, BCH8_ECC,
+ info->mtd.writesize / nand_chip->ecc.size,
+ nand_chip->ecc.size, nand_chip->ecc.bytes);
+ if (err < 0)
goto return_error;
- }
+
/* define ECC layout */
ecclayout->eccbytes = nand_chip->ecc.bytes *
(mtd->writesize /
@@ -1973,14 +1995,8 @@ static int omap_nand_probe(struct platform_device *pdev)
ecclayout->oobfree->offset =
ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
break;
-#else
- pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
- err = -EINVAL;
- goto return_error;
-#endif
case OMAP_ECC_BCH16_CODE_HW:
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
pr_info("using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.size = 512;
@@ -1991,12 +2007,13 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.calculate = omap_calculate_ecc_bch;
nand_chip->ecc.read_page = omap_read_page_bch;
nand_chip->ecc.write_page = omap_write_page_bch;
- /* This ECC scheme requires ELM H/W block */
- err = is_elm_present(info, pdata->elm_of_node, BCH16_ECC);
- if (err < 0) {
- pr_err("ELM is required for this ECC scheme\n");
+
+ err = elm_config(info->elm_dev, BCH16_ECC,
+ info->mtd.writesize / nand_chip->ecc.size,
+ nand_chip->ecc.size, nand_chip->ecc.bytes);
+ if (err < 0)
goto return_error;
- }
+
/* define ECC layout */
ecclayout->eccbytes = nand_chip->ecc.bytes *
(mtd->writesize /
@@ -2008,11 +2025,6 @@ static int omap_nand_probe(struct platform_device *pdev)
ecclayout->oobfree->offset =
ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
break;
-#else
- pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
- err = -EINVAL;
- goto return_error;
-#endif
default:
pr_err("nand: error: invalid or unsupported ECC scheme\n");
err = -EINVAL;