summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
authorArseniy Krasnov <AVKrasnov@sberdevices.ru>2023-06-08 07:47:28 +0300
committerMiquel Raynal <miquel.raynal@bootlin.com>2023-06-09 18:21:15 +0300
commitc17a90a46a712b78578dd7156380fdd515a2af9d (patch)
tree2c7f9d695134501cf07d2d9a22e011ebaec57b1f /drivers/mtd
parent262bc0096b7c9122f5f815f094b068a1496a20f6 (diff)
downloadlinux-c17a90a46a712b78578dd7156380fdd515a2af9d.tar.xz
mtd: rawnand: meson: waiting w/o wired ready/busy pin
If there is no wired ready/busy pin, classic way to wait for command completion is to use function 'nand_soft_waitrdy()'. Meson NAND has special command which allows to wait for NAND_STATUS_READY bit without reading status in a software loop (as 'nand_soft_waitrdy()' does). To use it send this command along with NAND_CMD_STATUS, then wait for an interrupt, and after interrupt send NAND_CMD_READ0. So this feature allows to use interrupt driven waiting without wired ready/busy pin. Suggested-by: Liang Yang <liang.yang@amlogic.com> Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230608044728.1328506-3-AVKrasnov@sberdevices.ru
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/raw/meson_nand.c77
1 files changed, 73 insertions, 4 deletions
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 3fe7bcd564f8..5e2720f4344f 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -38,6 +38,7 @@
#define NFC_CMD_SCRAMBLER_DISABLE 0
#define NFC_CMD_SHORTMODE_DISABLE 0
#define NFC_CMD_RB_INT BIT(14)
+#define NFC_CMD_RB_INT_NO_PIN ((0xb << 10) | BIT(18) | BIT(16))
#define NFC_CMD_GET_SIZE(x) (((x) >> 22) & GENMASK(4, 0))
@@ -182,6 +183,7 @@ struct meson_nfc {
u32 info_bytes;
unsigned long assigned_cs;
+ bool no_rb_pin;
};
enum {
@@ -395,7 +397,42 @@ static void meson_nfc_set_data_oob(struct nand_chip *nand,
}
}
-static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
+static int meson_nfc_wait_no_rb_pin(struct meson_nfc *nfc, int timeout_ms,
+ bool need_cmd_read0)
+{
+ u32 cmd, cfg;
+
+ meson_nfc_cmd_idle(nfc, nfc->timing.twb);
+ meson_nfc_drain_cmd(nfc);
+ meson_nfc_wait_cmd_finish(nfc, CMD_FIFO_EMPTY_TIMEOUT);
+
+ cfg = readl(nfc->reg_base + NFC_REG_CFG);
+ cfg |= NFC_RB_IRQ_EN;
+ writel(cfg, nfc->reg_base + NFC_REG_CFG);
+
+ reinit_completion(&nfc->completion);
+ cmd = nfc->param.chip_select | NFC_CMD_CLE | NAND_CMD_STATUS;
+ writel(cmd, nfc->reg_base + NFC_REG_CMD);
+
+ /* use the max erase time as the maximum clock for waiting R/B */
+ cmd = NFC_CMD_RB | NFC_CMD_RB_INT_NO_PIN | nfc->timing.tbers_max;
+ writel(cmd, nfc->reg_base + NFC_REG_CMD);
+
+ if (!wait_for_completion_timeout(&nfc->completion,
+ msecs_to_jiffies(timeout_ms)))
+ return -ETIMEDOUT;
+
+ if (need_cmd_read0) {
+ cmd = nfc->param.chip_select | NFC_CMD_CLE | NAND_CMD_READ0;
+ writel(cmd, nfc->reg_base + NFC_REG_CMD);
+ meson_nfc_drain_cmd(nfc);
+ meson_nfc_wait_cmd_finish(nfc, CMD_FIFO_EMPTY_TIMEOUT);
+ }
+
+ return 0;
+}
+
+static int meson_nfc_wait_rb_pin(struct meson_nfc *nfc, int timeout_ms)
{
u32 cmd, cfg;
int ret = 0;
@@ -423,6 +460,27 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
return ret;
}
+static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms,
+ bool need_cmd_read0)
+{
+ if (nfc->no_rb_pin) {
+ /* This mode is used when there is no wired R/B pin.
+ * It works like 'nand_soft_waitrdy()', but instead of
+ * polling NAND_CMD_STATUS bit in the software loop,
+ * it will wait for interrupt - controllers checks IO
+ * bus and when it detects NAND_CMD_STATUS on it, it
+ * raises interrupt. After interrupt, NAND_CMD_READ0 is
+ * sent as terminator of the ready waiting procedure if
+ * needed (for all cases except page programming - this
+ * is reason of 'need_cmd_read0' flag).
+ */
+ return meson_nfc_wait_no_rb_pin(nfc, timeout_ms,
+ need_cmd_read0);
+ } else {
+ return meson_nfc_wait_rb_pin(nfc, timeout_ms);
+ }
+}
+
static void meson_nfc_set_user_byte(struct nand_chip *nand, u8 *oob_buf)
{
struct meson_nfc_nand_chip *meson_chip = to_meson_nand(nand);
@@ -626,7 +684,7 @@ static int meson_nfc_rw_cmd_prepare_and_execute(struct nand_chip *nand,
if (in) {
nfc->cmdfifo.rw.cmd1 = cs | NFC_CMD_CLE | NAND_CMD_READSTART;
writel(nfc->cmdfifo.rw.cmd1, nfc->reg_base + NFC_REG_CMD);
- meson_nfc_queue_rb(nfc, PSEC_TO_MSEC(sdr->tR_max));
+ meson_nfc_queue_rb(nfc, PSEC_TO_MSEC(sdr->tR_max), true);
} else {
meson_nfc_cmd_idle(nfc, nfc->timing.tadl);
}
@@ -672,7 +730,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
cmd = nfc->param.chip_select | NFC_CMD_CLE | NAND_CMD_PAGEPROG;
writel(cmd, nfc->reg_base + NFC_REG_CMD);
- meson_nfc_queue_rb(nfc, PSEC_TO_MSEC(sdr->tPROG_max));
+ meson_nfc_queue_rb(nfc, PSEC_TO_MSEC(sdr->tPROG_max), false);
meson_nfc_dma_buffer_release(nand, data_len, info_len, DMA_TO_DEVICE);
@@ -955,7 +1013,8 @@ static int meson_nfc_exec_op(struct nand_chip *nand,
break;
case NAND_OP_WAITRDY_INSTR:
- meson_nfc_queue_rb(nfc, instr->ctx.waitrdy.timeout_ms);
+ meson_nfc_queue_rb(nfc, instr->ctx.waitrdy.timeout_ms,
+ true);
if (instr->delay_ns)
meson_nfc_cmd_idle(nfc, delay_idle);
break;
@@ -1251,6 +1310,7 @@ meson_nfc_nand_chip_init(struct device *dev,
struct mtd_info *mtd;
int ret, i;
u32 tmp, nsels;
+ u32 nand_rb_val = 0;
nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
if (!nsels || nsels > MAX_CE_NUM) {
@@ -1290,6 +1350,15 @@ meson_nfc_nand_chip_init(struct device *dev,
mtd->owner = THIS_MODULE;
mtd->dev.parent = dev;
+ ret = of_property_read_u32(np, "nand-rb", &nand_rb_val);
+ if (ret == -EINVAL)
+ nfc->no_rb_pin = true;
+ else if (ret)
+ return ret;
+
+ if (nand_rb_val)
+ return -EINVAL;
+
ret = nand_scan(nand, nsels);
if (ret)
return ret;