diff options
author | Frank Jungclaus <frank.jungclaus@esd.eu> | 2022-06-24 22:05:15 +0300 |
---|---|---|
committer | Marc Kleine-Budde <mkl@pengutronix.de> | 2022-06-25 14:05:26 +0300 |
commit | 5e910bdedc84c1f196863cebdf27c1806449c27c (patch) | |
tree | 7c944309c8dac5965c5c453181851d84847dbd28 /drivers/net/can/usb/esd_usb2.c | |
parent | ec30c109391c5eac9b1d689a61e4bfed88148947 (diff) | |
download | linux-5e910bdedc84c1f196863cebdf27c1806449c27c.tar.xz |
can/esd_usb2: Rename esd_usb2.c to esd_usb.c
As suggested by Vincent, renaming of esd_usb2.c to esd_usb.c
and according to that, adaption of Kconfig and Makfile, too.
Link: https://lore.kernel.org/all/20220624190517.2299701-2-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/net/can/usb/esd_usb2.c')
-rw-r--r-- | drivers/net/can/usb/esd_usb2.c | 1154 |
1 files changed, 0 insertions, 1154 deletions
diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c deleted file mode 100644 index 286daaaea0b8..000000000000 --- a/drivers/net/can/usb/esd_usb2.c +++ /dev/null @@ -1,1154 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * CAN driver for esd CAN-USB/2 and CAN-USB/Micro - * - * Copyright (C) 2010-2012 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh - */ -#include <linux/signal.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/netdevice.h> -#include <linux/usb.h> - -#include <linux/can.h> -#include <linux/can/dev.h> -#include <linux/can/error.h> - -MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@esd.eu>"); -MODULE_DESCRIPTION("CAN driver for esd CAN-USB/2 and CAN-USB/Micro interfaces"); -MODULE_LICENSE("GPL v2"); - -/* Define these values to match your devices */ -#define USB_ESDGMBH_VENDOR_ID 0x0ab4 -#define USB_CANUSB2_PRODUCT_ID 0x0010 -#define USB_CANUSBM_PRODUCT_ID 0x0011 - -#define ESD_USB2_CAN_CLOCK 60000000 -#define ESD_USBM_CAN_CLOCK 36000000 -#define ESD_USB2_MAX_NETS 2 - -/* USB2 commands */ -#define CMD_VERSION 1 /* also used for VERSION_REPLY */ -#define CMD_CAN_RX 2 /* device to host only */ -#define CMD_CAN_TX 3 /* also used for TX_DONE */ -#define CMD_SETBAUD 4 /* also used for SETBAUD_REPLY */ -#define CMD_TS 5 /* also used for TS_REPLY */ -#define CMD_IDADD 6 /* also used for IDADD_REPLY */ - -/* esd CAN message flags - dlc field */ -#define ESD_RTR 0x10 - -/* esd CAN message flags - id field */ -#define ESD_EXTID 0x20000000 -#define ESD_EVENT 0x40000000 -#define ESD_IDMASK 0x1fffffff - -/* esd CAN event ids used by this driver */ -#define ESD_EV_CAN_ERROR_EXT 2 - -/* baudrate message flags */ -#define ESD_USB2_UBR 0x80000000 -#define ESD_USB2_LOM 0x40000000 -#define ESD_USB2_NO_BAUDRATE 0x7fffffff -#define ESD_USB2_TSEG1_MIN 1 -#define ESD_USB2_TSEG1_MAX 16 -#define ESD_USB2_TSEG1_SHIFT 16 -#define ESD_USB2_TSEG2_MIN 1 -#define ESD_USB2_TSEG2_MAX 8 -#define ESD_USB2_TSEG2_SHIFT 20 -#define ESD_USB2_SJW_MAX 4 -#define ESD_USB2_SJW_SHIFT 14 -#define ESD_USBM_SJW_SHIFT 24 -#define ESD_USB2_BRP_MIN 1 -#define ESD_USB2_BRP_MAX 1024 -#define ESD_USB2_BRP_INC 1 -#define ESD_USB2_3_SAMPLES 0x00800000 - -/* esd IDADD message */ -#define ESD_ID_ENABLE 0x80 -#define ESD_MAX_ID_SEGMENT 64 - -/* SJA1000 ECC register (emulated by usb2 firmware) */ -#define SJA1000_ECC_SEG 0x1F -#define SJA1000_ECC_DIR 0x20 -#define SJA1000_ECC_ERR 0x06 -#define SJA1000_ECC_BIT 0x00 -#define SJA1000_ECC_FORM 0x40 -#define SJA1000_ECC_STUFF 0x80 -#define SJA1000_ECC_MASK 0xc0 - -/* esd bus state event codes */ -#define ESD_BUSSTATE_MASK 0xc0 -#define ESD_BUSSTATE_WARN 0x40 -#define ESD_BUSSTATE_ERRPASSIVE 0x80 -#define ESD_BUSSTATE_BUSOFF 0xc0 - -#define RX_BUFFER_SIZE 1024 -#define MAX_RX_URBS 4 -#define MAX_TX_URBS 16 /* must be power of 2 */ - -struct header_msg { - u8 len; /* len is always the total message length in 32bit words */ - u8 cmd; - u8 rsvd[2]; -}; - -struct version_msg { - u8 len; - u8 cmd; - u8 rsvd; - u8 flags; - __le32 drv_version; -}; - -struct version_reply_msg { - u8 len; - u8 cmd; - u8 nets; - u8 features; - __le32 version; - u8 name[16]; - __le32 rsvd; - __le32 ts; -}; - -struct rx_msg { - u8 len; - u8 cmd; - u8 net; - u8 dlc; - __le32 ts; - __le32 id; /* upper 3 bits contain flags */ - u8 data[8]; -}; - -struct tx_msg { - u8 len; - u8 cmd; - u8 net; - u8 dlc; - u32 hnd; /* opaque handle, not used by device */ - __le32 id; /* upper 3 bits contain flags */ - u8 data[8]; -}; - -struct tx_done_msg { - u8 len; - u8 cmd; - u8 net; - u8 status; - u32 hnd; /* opaque handle, not used by device */ - __le32 ts; -}; - -struct id_filter_msg { - u8 len; - u8 cmd; - u8 net; - u8 option; - __le32 mask[ESD_MAX_ID_SEGMENT + 1]; -}; - -struct set_baudrate_msg { - u8 len; - u8 cmd; - u8 net; - u8 rsvd; - __le32 baud; -}; - -/* Main message type used between library and application */ -struct __attribute__ ((packed)) esd_usb2_msg { - union { - struct header_msg hdr; - struct version_msg version; - struct version_reply_msg version_reply; - struct rx_msg rx; - struct tx_msg tx; - struct tx_done_msg txdone; - struct set_baudrate_msg setbaud; - struct id_filter_msg filter; - } msg; -}; - -static struct usb_device_id esd_usb2_table[] = { - {USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSB2_PRODUCT_ID)}, - {USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSBM_PRODUCT_ID)}, - {} -}; -MODULE_DEVICE_TABLE(usb, esd_usb2_table); - -struct esd_usb2_net_priv; - -struct esd_tx_urb_context { - struct esd_usb2_net_priv *priv; - u32 echo_index; -}; - -struct esd_usb2 { - struct usb_device *udev; - struct esd_usb2_net_priv *nets[ESD_USB2_MAX_NETS]; - - struct usb_anchor rx_submitted; - - int net_count; - u32 version; - int rxinitdone; - void *rxbuf[MAX_RX_URBS]; - dma_addr_t rxbuf_dma[MAX_RX_URBS]; -}; - -struct esd_usb2_net_priv { - struct can_priv can; /* must be the first member */ - - atomic_t active_tx_jobs; - struct usb_anchor tx_submitted; - struct esd_tx_urb_context tx_contexts[MAX_TX_URBS]; - - struct esd_usb2 *usb2; - struct net_device *netdev; - int index; - u8 old_state; - struct can_berr_counter bec; -}; - -static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv, - struct esd_usb2_msg *msg) -{ - struct net_device_stats *stats = &priv->netdev->stats; - struct can_frame *cf; - struct sk_buff *skb; - u32 id = le32_to_cpu(msg->msg.rx.id) & ESD_IDMASK; - - if (id == ESD_EV_CAN_ERROR_EXT) { - u8 state = msg->msg.rx.data[0]; - u8 ecc = msg->msg.rx.data[1]; - u8 rxerr = msg->msg.rx.data[2]; - u8 txerr = msg->msg.rx.data[3]; - - skb = alloc_can_err_skb(priv->netdev, &cf); - if (skb == NULL) { - stats->rx_dropped++; - return; - } - - if (state != priv->old_state) { - priv->old_state = state; - - switch (state & ESD_BUSSTATE_MASK) { - case ESD_BUSSTATE_BUSOFF: - priv->can.state = CAN_STATE_BUS_OFF; - cf->can_id |= CAN_ERR_BUSOFF; - priv->can.can_stats.bus_off++; - can_bus_off(priv->netdev); - break; - case ESD_BUSSTATE_WARN: - priv->can.state = CAN_STATE_ERROR_WARNING; - priv->can.can_stats.error_warning++; - break; - case ESD_BUSSTATE_ERRPASSIVE: - priv->can.state = CAN_STATE_ERROR_PASSIVE; - priv->can.can_stats.error_passive++; - break; - default: - priv->can.state = CAN_STATE_ERROR_ACTIVE; - break; - } - } else { - priv->can.can_stats.bus_error++; - stats->rx_errors++; - - cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; - - switch (ecc & SJA1000_ECC_MASK) { - case SJA1000_ECC_BIT: - cf->data[2] |= CAN_ERR_PROT_BIT; - break; - case SJA1000_ECC_FORM: - cf->data[2] |= CAN_ERR_PROT_FORM; - break; - case SJA1000_ECC_STUFF: - cf->data[2] |= CAN_ERR_PROT_STUFF; - break; - default: - cf->data[3] = ecc & SJA1000_ECC_SEG; - break; - } - - /* Error occurred during transmission? */ - if (!(ecc & SJA1000_ECC_DIR)) - cf->data[2] |= CAN_ERR_PROT_TX; - - if (priv->can.state == CAN_STATE_ERROR_WARNING || - priv->can.state == CAN_STATE_ERROR_PASSIVE) { - cf->data[1] = (txerr > rxerr) ? - CAN_ERR_CRTL_TX_PASSIVE : - CAN_ERR_CRTL_RX_PASSIVE; - } - cf->data[6] = txerr; - cf->data[7] = rxerr; - } - - priv->bec.txerr = txerr; - priv->bec.rxerr = rxerr; - - netif_rx(skb); - } -} - -static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv *priv, - struct esd_usb2_msg *msg) -{ - struct net_device_stats *stats = &priv->netdev->stats; - struct can_frame *cf; - struct sk_buff *skb; - int i; - u32 id; - - if (!netif_device_present(priv->netdev)) - return; - - id = le32_to_cpu(msg->msg.rx.id); - - if (id & ESD_EVENT) { - esd_usb2_rx_event(priv, msg); - } else { - skb = alloc_can_skb(priv->netdev, &cf); - if (skb == NULL) { - stats->rx_dropped++; - return; - } - - cf->can_id = id & ESD_IDMASK; - can_frame_set_cc_len(cf, msg->msg.rx.dlc & ~ESD_RTR, - priv->can.ctrlmode); - - if (id & ESD_EXTID) - cf->can_id |= CAN_EFF_FLAG; - - if (msg->msg.rx.dlc & ESD_RTR) { - cf->can_id |= CAN_RTR_FLAG; - } else { - for (i = 0; i < cf->len; i++) - cf->data[i] = msg->msg.rx.data[i]; - - stats->rx_bytes += cf->len; - } - stats->rx_packets++; - - netif_rx(skb); - } - - return; -} - -static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv, - struct esd_usb2_msg *msg) -{ - struct net_device_stats *stats = &priv->netdev->stats; - struct net_device *netdev = priv->netdev; - struct esd_tx_urb_context *context; - - if (!netif_device_present(netdev)) - return; - - context = &priv->tx_contexts[msg->msg.txdone.hnd & (MAX_TX_URBS - 1)]; - - if (!msg->msg.txdone.status) { - stats->tx_packets++; - stats->tx_bytes += can_get_echo_skb(netdev, context->echo_index, - NULL); - } else { - stats->tx_errors++; - can_free_echo_skb(netdev, context->echo_index, NULL); - } - - /* Release context */ - context->echo_index = MAX_TX_URBS; - atomic_dec(&priv->active_tx_jobs); - - netif_wake_queue(netdev); -} - -static void esd_usb2_read_bulk_callback(struct urb *urb) -{ - struct esd_usb2 *dev = urb->context; - int retval; - int pos = 0; - int i; - - switch (urb->status) { - case 0: /* success */ - break; - - case -ENOENT: - case -EPIPE: - case -EPROTO: - case -ESHUTDOWN: - return; - - default: - dev_info(dev->udev->dev.parent, - "Rx URB aborted (%d)\n", urb->status); - goto resubmit_urb; - } - - while (pos < urb->actual_length) { - struct esd_usb2_msg *msg; - - msg = (struct esd_usb2_msg *)(urb->transfer_buffer + pos); - - switch (msg->msg.hdr.cmd) { - case CMD_CAN_RX: - if (msg->msg.rx.net >= dev->net_count) { - dev_err(dev->udev->dev.parent, "format error\n"); - break; - } - - esd_usb2_rx_can_msg(dev->nets[msg->msg.rx.net], msg); - break; - - case CMD_CAN_TX: - if (msg->msg.txdone.net >= dev->net_count) { - dev_err(dev->udev->dev.parent, "format error\n"); - break; - } - - esd_usb2_tx_done_msg(dev->nets[msg->msg.txdone.net], - msg); - break; - } - - pos += msg->msg.hdr.len << 2; - - if (pos > urb->actual_length) { - dev_err(dev->udev->dev.parent, "format error\n"); - break; - } - } - -resubmit_urb: - usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), - urb->transfer_buffer, RX_BUFFER_SIZE, - esd_usb2_read_bulk_callback, dev); - - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval == -ENODEV) { - for (i = 0; i < dev->net_count; i++) { - if (dev->nets[i]) - netif_device_detach(dev->nets[i]->netdev); - } - } else if (retval) { - dev_err(dev->udev->dev.parent, - "failed resubmitting read bulk urb: %d\n", retval); - } - - return; -} - -/* - * callback for bulk IN urb - */ -static void esd_usb2_write_bulk_callback(struct urb *urb) -{ - struct esd_tx_urb_context *context = urb->context; - struct esd_usb2_net_priv *priv; - struct net_device *netdev; - size_t size = sizeof(struct esd_usb2_msg); - - WARN_ON(!context); - - priv = context->priv; - netdev = priv->netdev; - - /* free up our allocated buffer */ - usb_free_coherent(urb->dev, size, - urb->transfer_buffer, urb->transfer_dma); - - if (!netif_device_present(netdev)) - return; - - if (urb->status) - netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status); - - netif_trans_update(netdev); -} - -static ssize_t firmware_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct usb_interface *intf = to_usb_interface(d); - struct esd_usb2 *dev = usb_get_intfdata(intf); - - return sprintf(buf, "%d.%d.%d\n", - (dev->version >> 12) & 0xf, - (dev->version >> 8) & 0xf, - dev->version & 0xff); -} -static DEVICE_ATTR_RO(firmware); - -static ssize_t hardware_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct usb_interface *intf = to_usb_interface(d); - struct esd_usb2 *dev = usb_get_intfdata(intf); - - return sprintf(buf, "%d.%d.%d\n", - (dev->version >> 28) & 0xf, - (dev->version >> 24) & 0xf, - (dev->version >> 16) & 0xff); -} -static DEVICE_ATTR_RO(hardware); - -static ssize_t nets_show(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct usb_interface *intf = to_usb_interface(d); - struct esd_usb2 *dev = usb_get_intfdata(intf); - - return sprintf(buf, "%d", dev->net_count); -} -static DEVICE_ATTR_RO(nets); - -static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg) -{ - int actual_length; - - return usb_bulk_msg(dev->udev, - usb_sndbulkpipe(dev->udev, 2), - msg, - msg->msg.hdr.len << 2, - &actual_length, - 1000); -} - -static int esd_usb2_wait_msg(struct esd_usb2 *dev, - struct esd_usb2_msg *msg) -{ - int actual_length; - - return usb_bulk_msg(dev->udev, - usb_rcvbulkpipe(dev->udev, 1), - msg, - sizeof(*msg), - &actual_length, - 1000); -} - -static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev) -{ - int i, err = 0; - - if (dev->rxinitdone) - return 0; - - for (i = 0; i < MAX_RX_URBS; i++) { - struct urb *urb = NULL; - u8 *buf = NULL; - dma_addr_t buf_dma; - - /* create a URB, and a buffer for it */ - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - err = -ENOMEM; - break; - } - - buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL, - &buf_dma); - if (!buf) { - dev_warn(dev->udev->dev.parent, - "No memory left for USB buffer\n"); - err = -ENOMEM; - goto freeurb; - } - - urb->transfer_dma = buf_dma; - - usb_fill_bulk_urb(urb, dev->udev, - usb_rcvbulkpipe(dev->udev, 1), - buf, RX_BUFFER_SIZE, - esd_usb2_read_bulk_callback, dev); - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - usb_anchor_urb(urb, &dev->rx_submitted); - - err = usb_submit_urb(urb, GFP_KERNEL); - if (err) { - usb_unanchor_urb(urb); - usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf, - urb->transfer_dma); - goto freeurb; - } - - dev->rxbuf[i] = buf; - dev->rxbuf_dma[i] = buf_dma; - -freeurb: - /* Drop reference, USB core will take care of freeing it */ - usb_free_urb(urb); - if (err) - break; - } - - /* Did we submit any URBs */ - if (i == 0) { - dev_err(dev->udev->dev.parent, "couldn't setup read URBs\n"); - return err; - } - - /* Warn if we've couldn't transmit all the URBs */ - if (i < MAX_RX_URBS) { - dev_warn(dev->udev->dev.parent, - "rx performance may be slow\n"); - } - - dev->rxinitdone = 1; - return 0; -} - -/* - * Start interface - */ -static int esd_usb2_start(struct esd_usb2_net_priv *priv) -{ - struct esd_usb2 *dev = priv->usb2; - struct net_device *netdev = priv->netdev; - struct esd_usb2_msg *msg; - int err, i; - - msg = kmalloc(sizeof(*msg), GFP_KERNEL); - if (!msg) { - err = -ENOMEM; - goto out; - } - - /* - * Enable all IDs - * The IDADD message takes up to 64 32 bit bitmasks (2048 bits). - * Each bit represents one 11 bit CAN identifier. A set bit - * enables reception of the corresponding CAN identifier. A cleared - * bit disabled this identifier. An additional bitmask value - * following the CAN 2.0A bits is used to enable reception of - * extended CAN frames. Only the LSB of this final mask is checked - * for the complete 29 bit ID range. The IDADD message also allows - * filter configuration for an ID subset. In this case you can add - * the number of the starting bitmask (0..64) to the filter.option - * field followed by only some bitmasks. - */ - msg->msg.hdr.cmd = CMD_IDADD; - msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; - msg->msg.filter.net = priv->index; - msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ - for (i = 0; i < ESD_MAX_ID_SEGMENT; i++) - msg->msg.filter.mask[i] = cpu_to_le32(0xffffffff); - /* enable 29bit extended IDs */ - msg->msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); - - err = esd_usb2_send_msg(dev, msg); - if (err) - goto out; - - err = esd_usb2_setup_rx_urbs(dev); - if (err) - goto out; - - priv->can.state = CAN_STATE_ERROR_ACTIVE; - -out: - if (err == -ENODEV) - netif_device_detach(netdev); - if (err) - netdev_err(netdev, "couldn't start device: %d\n", err); - - kfree(msg); - return err; -} - -static void unlink_all_urbs(struct esd_usb2 *dev) -{ - struct esd_usb2_net_priv *priv; - int i, j; - - usb_kill_anchored_urbs(&dev->rx_submitted); - - for (i = 0; i < MAX_RX_URBS; ++i) - usb_free_coherent(dev->udev, RX_BUFFER_SIZE, - dev->rxbuf[i], dev->rxbuf_dma[i]); - - for (i = 0; i < dev->net_count; i++) { - priv = dev->nets[i]; - if (priv) { - usb_kill_anchored_urbs(&priv->tx_submitted); - atomic_set(&priv->active_tx_jobs, 0); - - for (j = 0; j < MAX_TX_URBS; j++) - priv->tx_contexts[j].echo_index = MAX_TX_URBS; - } - } -} - -static int esd_usb2_open(struct net_device *netdev) -{ - struct esd_usb2_net_priv *priv = netdev_priv(netdev); - int err; - - /* common open */ - err = open_candev(netdev); - if (err) - return err; - - /* finally start device */ - err = esd_usb2_start(priv); - if (err) { - netdev_warn(netdev, "couldn't start device: %d\n", err); - close_candev(netdev); - return err; - } - - netif_start_queue(netdev); - - return 0; -} - -static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb, - struct net_device *netdev) -{ - struct esd_usb2_net_priv *priv = netdev_priv(netdev); - struct esd_usb2 *dev = priv->usb2; - struct esd_tx_urb_context *context = NULL; - struct net_device_stats *stats = &netdev->stats; - struct can_frame *cf = (struct can_frame *)skb->data; - struct esd_usb2_msg *msg; - struct urb *urb; - u8 *buf; - int i, err; - int ret = NETDEV_TX_OK; - size_t size = sizeof(struct esd_usb2_msg); - - if (can_dropped_invalid_skb(netdev, skb)) - return NETDEV_TX_OK; - - /* create a URB, and a buffer for it, and copy the data to the URB */ - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!urb) { - stats->tx_dropped++; - dev_kfree_skb(skb); - goto nourbmem; - } - - buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC, - &urb->transfer_dma); - if (!buf) { - netdev_err(netdev, "No memory left for USB buffer\n"); - stats->tx_dropped++; - dev_kfree_skb(skb); - goto nobufmem; - } - - msg = (struct esd_usb2_msg *)buf; - - msg->msg.hdr.len = 3; /* minimal length */ - msg->msg.hdr.cmd = CMD_CAN_TX; - msg->msg.tx.net = priv->index; - msg->msg.tx.dlc = can_get_cc_dlc(cf, priv->can.ctrlmode); - msg->msg.tx.id = cpu_to_le32(cf->can_id & CAN_ERR_MASK); - - if (cf->can_id & CAN_RTR_FLAG) - msg->msg.tx.dlc |= ESD_RTR; - - if (cf->can_id & CAN_EFF_FLAG) - msg->msg.tx.id |= cpu_to_le32(ESD_EXTID); - - for (i = 0; i < cf->len; i++) - msg->msg.tx.data[i] = cf->data[i]; - - msg->msg.hdr.len += (cf->len + 3) >> 2; - - for (i = 0; i < MAX_TX_URBS; i++) { - if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) { - context = &priv->tx_contexts[i]; - break; - } - } - - /* - * This may never happen. - */ - if (!context) { - netdev_warn(netdev, "couldn't find free context\n"); - ret = NETDEV_TX_BUSY; - goto releasebuf; - } - - context->priv = priv; - context->echo_index = i; - - /* hnd must not be 0 - MSB is stripped in txdone handling */ - msg->msg.tx.hnd = 0x80000000 | i; /* returned in TX done message */ - - usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf, - msg->msg.hdr.len << 2, - esd_usb2_write_bulk_callback, context); - - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - usb_anchor_urb(urb, &priv->tx_submitted); - - can_put_echo_skb(skb, netdev, context->echo_index, 0); - - atomic_inc(&priv->active_tx_jobs); - - /* Slow down tx path */ - if (atomic_read(&priv->active_tx_jobs) >= MAX_TX_URBS) - netif_stop_queue(netdev); - - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err) { - can_free_echo_skb(netdev, context->echo_index, NULL); - - atomic_dec(&priv->active_tx_jobs); - usb_unanchor_urb(urb); - - stats->tx_dropped++; - - if (err == -ENODEV) - netif_device_detach(netdev); - else - netdev_warn(netdev, "failed tx_urb %d\n", err); - - goto releasebuf; - } - - netif_trans_update(netdev); - - /* - * Release our reference to this URB, the USB core will eventually free - * it entirely. - */ - usb_free_urb(urb); - - return NETDEV_TX_OK; - -releasebuf: - usb_free_coherent(dev->udev, size, buf, urb->transfer_dma); - -nobufmem: - usb_free_urb(urb); - -nourbmem: - return ret; -} - -static int esd_usb2_close(struct net_device *netdev) -{ - struct esd_usb2_net_priv *priv = netdev_priv(netdev); - struct esd_usb2_msg *msg; - int i; - - msg = kmalloc(sizeof(*msg), GFP_KERNEL); - if (!msg) - return -ENOMEM; - - /* Disable all IDs (see esd_usb2_start()) */ - msg->msg.hdr.cmd = CMD_IDADD; - msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; - msg->msg.filter.net = priv->index; - msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ - for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++) - msg->msg.filter.mask[i] = 0; - if (esd_usb2_send_msg(priv->usb2, msg) < 0) - netdev_err(netdev, "sending idadd message failed\n"); - - /* set CAN controller to reset mode */ - msg->msg.hdr.len = 2; - msg->msg.hdr.cmd = CMD_SETBAUD; - msg->msg.setbaud.net = priv->index; - msg->msg.setbaud.rsvd = 0; - msg->msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); - if (esd_usb2_send_msg(priv->usb2, msg) < 0) - netdev_err(netdev, "sending setbaud message failed\n"); - - priv->can.state = CAN_STATE_STOPPED; - - netif_stop_queue(netdev); - - close_candev(netdev); - - kfree(msg); - - return 0; -} - -static const struct net_device_ops esd_usb2_netdev_ops = { - .ndo_open = esd_usb2_open, - .ndo_stop = esd_usb2_close, - .ndo_start_xmit = esd_usb2_start_xmit, - .ndo_change_mtu = can_change_mtu, -}; - -static const struct can_bittiming_const esd_usb2_bittiming_const = { - .name = "esd_usb2", - .tseg1_min = ESD_USB2_TSEG1_MIN, - .tseg1_max = ESD_USB2_TSEG1_MAX, - .tseg2_min = ESD_USB2_TSEG2_MIN, - .tseg2_max = ESD_USB2_TSEG2_MAX, - .sjw_max = ESD_USB2_SJW_MAX, - .brp_min = ESD_USB2_BRP_MIN, - .brp_max = ESD_USB2_BRP_MAX, - .brp_inc = ESD_USB2_BRP_INC, -}; - -static int esd_usb2_set_bittiming(struct net_device *netdev) -{ - struct esd_usb2_net_priv *priv = netdev_priv(netdev); - struct can_bittiming *bt = &priv->can.bittiming; - struct esd_usb2_msg *msg; - int err; - u32 canbtr; - int sjw_shift; - - canbtr = ESD_USB2_UBR; - if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) - canbtr |= ESD_USB2_LOM; - - canbtr |= (bt->brp - 1) & (ESD_USB2_BRP_MAX - 1); - - if (le16_to_cpu(priv->usb2->udev->descriptor.idProduct) == - USB_CANUSBM_PRODUCT_ID) - sjw_shift = ESD_USBM_SJW_SHIFT; - else - sjw_shift = ESD_USB2_SJW_SHIFT; - - canbtr |= ((bt->sjw - 1) & (ESD_USB2_SJW_MAX - 1)) - << sjw_shift; - canbtr |= ((bt->prop_seg + bt->phase_seg1 - 1) - & (ESD_USB2_TSEG1_MAX - 1)) - << ESD_USB2_TSEG1_SHIFT; - canbtr |= ((bt->phase_seg2 - 1) & (ESD_USB2_TSEG2_MAX - 1)) - << ESD_USB2_TSEG2_SHIFT; - if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) - canbtr |= ESD_USB2_3_SAMPLES; - - msg = kmalloc(sizeof(*msg), GFP_KERNEL); - if (!msg) - return -ENOMEM; - - msg->msg.hdr.len = 2; - msg->msg.hdr.cmd = CMD_SETBAUD; - msg->msg.setbaud.net = priv->index; - msg->msg.setbaud.rsvd = 0; - msg->msg.setbaud.baud = cpu_to_le32(canbtr); - - netdev_info(netdev, "setting BTR=%#x\n", canbtr); - - err = esd_usb2_send_msg(priv->usb2, msg); - - kfree(msg); - return err; -} - -static int esd_usb2_get_berr_counter(const struct net_device *netdev, - struct can_berr_counter *bec) -{ - struct esd_usb2_net_priv *priv = netdev_priv(netdev); - - bec->txerr = priv->bec.txerr; - bec->rxerr = priv->bec.rxerr; - - return 0; -} - -static int esd_usb2_set_mode(struct net_device *netdev, enum can_mode mode) -{ - switch (mode) { - case CAN_MODE_START: - netif_wake_queue(netdev); - break; - - default: - return -EOPNOTSUPP; - } - - return 0; -} - -static int esd_usb2_probe_one_net(struct usb_interface *intf, int index) -{ - struct esd_usb2 *dev = usb_get_intfdata(intf); - struct net_device *netdev; - struct esd_usb2_net_priv *priv; - int err = 0; - int i; - - netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS); - if (!netdev) { - dev_err(&intf->dev, "couldn't alloc candev\n"); - err = -ENOMEM; - goto done; - } - - priv = netdev_priv(netdev); - - init_usb_anchor(&priv->tx_submitted); - atomic_set(&priv->active_tx_jobs, 0); - - for (i = 0; i < MAX_TX_URBS; i++) - priv->tx_contexts[i].echo_index = MAX_TX_URBS; - - priv->usb2 = dev; - priv->netdev = netdev; - priv->index = index; - - priv->can.state = CAN_STATE_STOPPED; - priv->can.ctrlmode_supported = CAN_CTRLMODE_LISTENONLY | - CAN_CTRLMODE_CC_LEN8_DLC; - - if (le16_to_cpu(dev->udev->descriptor.idProduct) == - USB_CANUSBM_PRODUCT_ID) - priv->can.clock.freq = ESD_USBM_CAN_CLOCK; - else { - priv->can.clock.freq = ESD_USB2_CAN_CLOCK; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; - } - - priv->can.bittiming_const = &esd_usb2_bittiming_const; - priv->can.do_set_bittiming = esd_usb2_set_bittiming; - priv->can.do_set_mode = esd_usb2_set_mode; - priv->can.do_get_berr_counter = esd_usb2_get_berr_counter; - - netdev->flags |= IFF_ECHO; /* we support local echo */ - - netdev->netdev_ops = &esd_usb2_netdev_ops; - - SET_NETDEV_DEV(netdev, &intf->dev); - netdev->dev_id = index; - - err = register_candev(netdev); - if (err) { - dev_err(&intf->dev, "couldn't register CAN device: %d\n", err); - free_candev(netdev); - err = -ENOMEM; - goto done; - } - - dev->nets[index] = priv; - netdev_info(netdev, "device %s registered\n", netdev->name); - -done: - return err; -} - -/* - * probe function for new USB2 devices - * - * check version information and number of available - * CAN interfaces - */ -static int esd_usb2_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct esd_usb2 *dev; - struct esd_usb2_msg *msg; - int i, err; - - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - err = -ENOMEM; - goto done; - } - - dev->udev = interface_to_usbdev(intf); - - init_usb_anchor(&dev->rx_submitted); - - usb_set_intfdata(intf, dev); - - msg = kmalloc(sizeof(*msg), GFP_KERNEL); - if (!msg) { - err = -ENOMEM; - goto free_msg; - } - - /* query number of CAN interfaces (nets) */ - msg->msg.hdr.cmd = CMD_VERSION; - msg->msg.hdr.len = 2; - msg->msg.version.rsvd = 0; - msg->msg.version.flags = 0; - msg->msg.version.drv_version = 0; - - err = esd_usb2_send_msg(dev, msg); - if (err < 0) { - dev_err(&intf->dev, "sending version message failed\n"); - goto free_msg; - } - - err = esd_usb2_wait_msg(dev, msg); - if (err < 0) { - dev_err(&intf->dev, "no version message answer\n"); - goto free_msg; - } - - dev->net_count = (int)msg->msg.version_reply.nets; - dev->version = le32_to_cpu(msg->msg.version_reply.version); - - if (device_create_file(&intf->dev, &dev_attr_firmware)) - dev_err(&intf->dev, - "Couldn't create device file for firmware\n"); - - if (device_create_file(&intf->dev, &dev_attr_hardware)) - dev_err(&intf->dev, - "Couldn't create device file for hardware\n"); - - if (device_create_file(&intf->dev, &dev_attr_nets)) - dev_err(&intf->dev, - "Couldn't create device file for nets\n"); - - /* do per device probing */ - for (i = 0; i < dev->net_count; i++) - esd_usb2_probe_one_net(intf, i); - -free_msg: - kfree(msg); - if (err) - kfree(dev); -done: - return err; -} - -/* - * called by the usb core when the device is removed from the system - */ -static void esd_usb2_disconnect(struct usb_interface *intf) -{ - struct esd_usb2 *dev = usb_get_intfdata(intf); - struct net_device *netdev; - int i; - - device_remove_file(&intf->dev, &dev_attr_firmware); - device_remove_file(&intf->dev, &dev_attr_hardware); - device_remove_file(&intf->dev, &dev_attr_nets); - - usb_set_intfdata(intf, NULL); - - if (dev) { - for (i = 0; i < dev->net_count; i++) { - if (dev->nets[i]) { - netdev = dev->nets[i]->netdev; - unregister_netdev(netdev); - free_candev(netdev); - } - } - unlink_all_urbs(dev); - kfree(dev); - } -} - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver esd_usb2_driver = { - .name = "esd_usb2", - .probe = esd_usb2_probe, - .disconnect = esd_usb2_disconnect, - .id_table = esd_usb2_table, -}; - -module_usb_driver(esd_usb2_driver); |