diff options
| author | Arun Ramadoss <arun.ramadoss@microchip.com> | 2023-01-20 08:21:35 +0300 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2023-01-24 09:12:35 +0300 |
| commit | 71d7920fb2d1d6cdaa6db58426783be02c9cb7bb (patch) | |
| tree | 8443658cd4f29cf001d0cd936855b662f449f8f8 /drivers/net/dsa/microchip/ksz_common.h | |
| parent | e30f33a5f5c74f278feaa57517d851874dfc640f (diff) | |
| download | linux-71d7920fb2d1d6cdaa6db58426783be02c9cb7bb.tar.xz | |
net: dsa: microchip: add support for credit based shaper
KSZ9477, KSZ9567, KSZ9563, KSZ8563 and LAN937x supports Credit based
shaper. To differentiate the chip supporting cbs, tc_cbs_supported
flag is introduced in ksz_chip_data.
And KSZ series has 16bit Credit increment registers whereas LAN937x has
24bit register. The value to be programmed in the credit increment is
determined using the successive multiplication method to convert decimal
fraction to hexadecimal fraction.
For example: if idleslope is 10000 and sendslope is -90000, then
bandwidth is 10000 - (-90000) = 100000.
The 10% bandwidth of 100Mbps means 10/100 = 0.1(decimal). This value has
to be converted to hexa.
1) 0.1 * 16 = 1.6 --> fraction 0.6 Carry = 1 (MSB)
2) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
3) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
4) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
5) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
6) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9 (LSB)
Now 0.1(decimal) becomes 0.199999(Hex).
If it is LAN937x, 24 bit value will be programmed to Credit Inc
register, 0x199999. For others 16 bit value will be prgrammed, 0x1999.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/dsa/microchip/ksz_common.h')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.h | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index 1a00143b0345..d2d5761d58e9 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -50,6 +50,7 @@ struct ksz_chip_data { int port_cnt; u8 port_nirqs; u8 num_tx_queues; + bool tc_cbs_supported; const struct ksz_dev_ops *ops; bool phy_errata_9477; bool ksz87xx_eee_link_erratum; @@ -354,6 +355,7 @@ struct ksz_dev_ops { struct phy_device *phydev, int speed, int duplex, bool tx_pause, bool rx_pause); void (*setup_rgmii_delay)(struct ksz_device *dev, int port); + int (*tc_cbs_set_cinc)(struct ksz_device *dev, int port, u32 val); void (*config_cpu_port)(struct dsa_switch *ds); int (*enable_stp_addr)(struct ksz_device *dev); int (*reset)(struct ksz_device *dev); @@ -647,6 +649,24 @@ static inline int is_lan937x(struct ksz_device *dev) #define KSZ8_LEGAL_PACKET_SIZE 1518 #define KSZ9477_MAX_FRAME_SIZE 9000 +/* CBS related registers */ +#define REG_PORT_MTI_QUEUE_INDEX__4 0x0900 + +#define REG_PORT_MTI_QUEUE_CTRL_0 0x0914 + +#define MTI_SCHEDULE_MODE_M 0x3 +#define MTI_SCHEDULE_MODE_S 6 +#define MTI_SCHEDULE_STRICT_PRIO 0 +#define MTI_SCHEDULE_WRR 2 +#define MTI_SHAPING_M 0x3 +#define MTI_SHAPING_S 4 +#define MTI_SHAPING_OFF 0 +#define MTI_SHAPING_SRP 1 +#define MTI_SHAPING_TIME_AWARE 2 + +#define REG_PORT_MTI_HI_WATER_MARK 0x0916 +#define REG_PORT_MTI_LO_WATER_MARK 0x0918 + /* Regmap tables generation */ #define KSZ_SPI_OP_RD 3 #define KSZ_SPI_OP_WR 2 |