Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 34 insertions, 28 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 3e30c8642c26..5d71b7d43237 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -1,6 +1,6 @@
 /* bnx2x_hsi.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2011 Broadcom Corporation
+ * Copyright (c) 2007-2012 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -34,9 +34,10 @@ struct license_key {
 };
 
 
-#define PORT_0              0
-#define PORT_1              1
-#define PORT_MAX            2
+#define PORT_0			0
+#define PORT_1			1
+#define PORT_MAX		2
+#define NVM_PATH_MAX		2
 
 /****************************************************************************
  * Shared HW configuration                                                  *
@@ -618,12 +619,6 @@ struct port_hw_cfg {		    /* port 0: 0x12c  port 1: 0x2bc */
 	#define PORT_HW_CFG_ENABLE_CMS_DISABLED                      0x00000000
 	#define PORT_HW_CFG_ENABLE_CMS_ENABLED                       0x00200000
 
-	/*  Enable RJ45 magjack pair swapping on 10GBase-T PHY, 84833 only */
-	#define PORT_HW_CFG_RJ45_PR_SWP_MASK                0x00400000
-	#define PORT_HW_CFG_RJ45_PR_SWP_SHIFT			     22
-	#define PORT_HW_CFG_RJ45_PR_SWP_DISABLED		     0x00000000
-	#define PORT_HW_CFG_RJ45_PR_SWP_ENABLED			     0x00400000
-
 	/*  Determine the Serdes electrical interface   */
 	#define PORT_HW_CFG_NET_SERDES_IF_MASK              0x0F000000
 	#define PORT_HW_CFG_NET_SERDES_IF_SHIFT                      24
@@ -898,11 +893,6 @@ struct port_feat_cfg {		    /* port 0: 0x454  port 1: 0x4c8 */
 		#define PORT_FEAT_CFG_DCBX_DISABLED                  0x00000000
 		#define PORT_FEAT_CFG_DCBX_ENABLED                   0x00000100
 
-	#define PORT_FEAT_CFG_AUTOGREEN_MASK                0x00000200
-	#define PORT_FEAT_CFG_AUTOGREEN_SHIFT                        9
-	#define PORT_FEAT_CFG_AUTOGREEN_DISABLED                     0x00000000
-	#define PORT_FEAT_CFG_AUTOGREEN_ENABLED                      0x00000200
-
 	#define PORT_FEATURE_EN_SIZE_MASK                   0x0f000000
 	#define PORT_FEATURE_EN_SIZE_SHIFT                           24
 	#define PORT_FEATURE_WOL_ENABLED                             0x01000000
@@ -1139,8 +1129,7 @@ struct shm_dev_info {				/* size */
 
 #define FW_ACK_NUM_OF_POLL  (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS)
 
-/* LED Blink rate that will achieve ~15.9Hz */
-#define LED_BLINK_RATE_VAL      480
+#define MFW_TRACE_SIGNATURE     0x54524342
 
 /****************************************************************************
  * Driver <-> FW Mailbox                                                    *
@@ -1407,7 +1396,7 @@ struct port_mf_cfg {
 	#define PORT_MF_CFG_E1HOV_TAG_SHIFT             0
 	#define PORT_MF_CFG_E1HOV_TAG_DEFAULT         PORT_MF_CFG_E1HOV_TAG_MASK
 
-	u32 reserved[3];
+	u32 reserved[1];
 
 };
 
@@ -1493,7 +1482,8 @@ struct func_ext_cfg {
 struct mf_cfg {
 
 	struct shared_mf_cfg    shared_mf_config;       /* 0x4 */
-	struct port_mf_cfg  port_mf_config[PORT_MAX];   /* 0x10 * 2 = 0x20 */
+							/* 0x8*2*2=0x20 */
+	struct port_mf_cfg  port_mf_config[NVM_PATH_MAX][PORT_MAX];
 	/* for all chips, there are 8 mf functions */
 	struct func_mf_cfg  func_mf_config[E1H_FUNC_MAX]; /* 0x18 * 8 = 0xc0 */
 	/*
@@ -1845,6 +1835,9 @@ struct lldp_local_mib {
 	#define DCBX_LOCAL_PFC_MISMATCH          0x00000010
 	#define DCBX_LOCAL_APP_MISMATCH          0x00000020
 	#define DCBX_REMOTE_MIB_ERROR		 0x00000040
+	#define DCBX_REMOTE_ETS_TLV_NOT_FOUND    0x00000080
+	#define DCBX_REMOTE_PFC_TLV_NOT_FOUND    0x00000100
+	#define DCBX_REMOTE_APP_TLV_NOT_FOUND    0x00000200
 	struct dcbx_features   features;
 	u32 suffix_seq_num;
 };
@@ -2002,6 +1995,7 @@ struct shmem2_region {
 #define DRV_INFO_CONTROL_VER_SHIFT         0
 #define DRV_INFO_CONTROL_OP_CODE_MASK      0x0000ff00
 #define DRV_INFO_CONTROL_OP_CODE_SHIFT     8
+	u32 ibft_host_addr; /* initialized by option ROM */
 };
 
 
@@ -2700,8 +2694,8 @@ union drv_info_to_mcp {
 	struct iscsi_stats_info	iscsi_stat;
 };
 #define BCM_5710_FW_MAJOR_VERSION			7
-#define BCM_5710_FW_MINOR_VERSION			0
-#define BCM_5710_FW_REVISION_VERSION		29
+#define BCM_5710_FW_MINOR_VERSION			2
+#define BCM_5710_FW_REVISION_VERSION		16
 #define BCM_5710_FW_ENGINEERING_VERSION		0
 #define BCM_5710_FW_COMPILE_FLAGS			1
 
@@ -3308,8 +3302,10 @@ struct client_init_rx_data {
 #define CLIENT_INIT_RX_DATA_TPA_EN_IPV4_SHIFT 0
 #define CLIENT_INIT_RX_DATA_TPA_EN_IPV6 (0x1<<1)
 #define CLIENT_INIT_RX_DATA_TPA_EN_IPV6_SHIFT 1
-#define CLIENT_INIT_RX_DATA_RESERVED5 (0x3F<<2)
-#define CLIENT_INIT_RX_DATA_RESERVED5_SHIFT 2
+#define CLIENT_INIT_RX_DATA_TPA_MODE (0x1<<2)
+#define CLIENT_INIT_RX_DATA_TPA_MODE_SHIFT 2
+#define CLIENT_INIT_RX_DATA_RESERVED5 (0x1F<<3)
+#define CLIENT_INIT_RX_DATA_RESERVED5_SHIFT 3
 	u8 vmqueue_mode_en_flg;
 	u8 extra_data_over_sgl_en_flg;
 	u8 cache_line_alignment_log_size;
@@ -3324,7 +3320,7 @@ struct client_init_rx_data {
 	u8 outer_vlan_removal_enable_flg;
 	u8 status_block_id;
 	u8 rx_sb_index_number;
-	u8 reserved0;
+	u8 dont_verify_rings_pause_thr_flg;
 	u8 max_tpa_queues;
 	u8 silent_vlan_removal_flg;
 	__le16 max_bytes_on_bd;
@@ -3657,7 +3653,7 @@ struct eth_fast_path_rx_cqe {
 	u8 placement_offset;
 	__le32 rss_hash_result;
 	__le16 vlan_tag;
-	__le16 pkt_len;
+	__le16 pkt_len_or_gro_seg_len;
 	__le16 len_on_bd;
 	struct parsing_flags pars_flags;
 	union eth_sgl_or_raw_data sgl_or_raw_data;
@@ -4215,6 +4211,15 @@ enum set_mac_action_type {
 
 
 /*
+ * Ethernet TPA Modes
+ */
+enum tpa_mode {
+	TPA_LRO,
+	TPA_GRO,
+	MAX_TPA_MODE};
+
+
+/*
  * tpa update ramrod data
  */
 struct tpa_update_ramrod_data {
@@ -4224,7 +4229,8 @@ struct tpa_update_ramrod_data {
 	u8 max_tpa_queues;
 	u8 max_sges_for_packet;
 	u8 complete_on_both_clients;
-	__le16 reserved1;
+	u8 dont_verify_rings_pause_thr_flg;
+	u8 tpa_mode;
 	__le16 sge_buff_size;
 	__le16 max_agg_size;
 	__le32 sge_page_base_lo;
@@ -4447,13 +4453,13 @@ enum common_spqe_cmd_id {
 	RAMROD_CMD_ID_COMMON_UNUSED,
 	RAMROD_CMD_ID_COMMON_FUNCTION_START,
 	RAMROD_CMD_ID_COMMON_FUNCTION_STOP,
+	RAMROD_CMD_ID_COMMON_FUNCTION_UPDATE,
 	RAMROD_CMD_ID_COMMON_CFC_DEL,
 	RAMROD_CMD_ID_COMMON_CFC_DEL_WB,
 	RAMROD_CMD_ID_COMMON_STAT_QUERY,
 	RAMROD_CMD_ID_COMMON_STOP_TRAFFIC,
 	RAMROD_CMD_ID_COMMON_START_TRAFFIC,
 	RAMROD_CMD_ID_COMMON_RESERVED1,
-	RAMROD_CMD_ID_COMMON_RESERVED2,
 	MAX_COMMON_SPQE_CMD_ID
 };
 
@@ -4733,8 +4739,8 @@ enum event_ring_opcode {
 	EVENT_RING_OPCODE_MALICIOUS_VF,
 	EVENT_RING_OPCODE_FORWARD_SETUP,
 	EVENT_RING_OPCODE_RSS_UPDATE_RULES,
+	EVENT_RING_OPCODE_FUNCTION_UPDATE,
 	EVENT_RING_OPCODE_RESERVED1,
-	EVENT_RING_OPCODE_RESERVED2,
 	EVENT_RING_OPCODE_SET_MAC,
 	EVENT_RING_OPCODE_CLASSIFICATION_RULES,
 	EVENT_RING_OPCODE_FILTERS_RULES,