enetc: Add vf to pf messaging support

VSIs (VFs) may send a message to the PSI (PF) for general notification
or to gain access to hardware resources which requires host inspection.
These messages may vary in size and are handled as a partition copy
between two memory regions owned by the respective participants.
The PSI will respond with fail or success and a 16-bit message code.
The patch implements the vf to pf messaging mechanism above and, as the
first application making use of this support, it enables the VF to
configure its own primary MAC address.

Signed-off-by: Catalin Horghidan <catalin.horghidan@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 50 insertions, 0 deletions

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
index 68d3b2b5dfb9..25edb46a4451 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
@@ -34,6 +34,29 @@
 #define ENETC_SIPMAR0	0x80
 #define ENETC_SIPMAR1	0x84
 
+/* VF-PF Message passing */
+#define ENETC_DEFAULT_MSG_SIZE	1024	/* and max size */
+/* msg size encoding: default and max msg value of 1024B encoded as 0 */
+static inline u32 enetc_vsi_set_msize(u32 size)
+{
+	return size < ENETC_DEFAULT_MSG_SIZE ? size >> 5 : 0;
+}
+
+#define ENETC_PSIMSGRR	0x204
+#define ENETC_PSIMSGRR_MR_MASK	GENMASK(2, 1)
+#define ENETC_PSIMSGRR_MR(n) BIT((n) + 1) /* n = VSI index */
+#define ENETC_PSIVMSGRCVAR0(n)	(0x210 + (n) * 0x8) /* n = VSI index */
+#define ENETC_PSIVMSGRCVAR1(n)	(0x214 + (n) * 0x8)
+
+#define ENETC_VSIMSGSR	0x204	/* RO */
+#define ENETC_VSIMSGSR_MB	BIT(0)
+#define ENETC_VSIMSGSR_MS	BIT(1)
+#define ENETC_VSIMSGSNDAR0	0x210
+#define ENETC_VSIMSGSNDAR1	0x214
+
+#define ENETC_SIMSGSR_SET_MC(val) ((val) << 16)
+#define ENETC_SIMSGSR_GET_MC(val) ((val) >> 16)
+
 /* SI statistics */
 #define ENETC_SIROCT	0x300
 #define ENETC_SIRFRM	0x308
@@ -418,6 +441,33 @@ static inline void enetc_get_primary_mac_addr(struct enetc_hw *hw, u8 *addr)
 /* base index for Rx/Tx interrupts */
 #define ENETC_BDR_INT_BASE_IDX	1
 
+/* Messaging */
+
+/* Command completion status */
+enum enetc_msg_cmd_status {
+	ENETC_MSG_CMD_STATUS_OK,
+	ENETC_MSG_CMD_STATUS_FAIL
+};
+
+/* VSI-PSI command message types */
+enum enetc_msg_cmd_type {
+	ENETC_MSG_CMD_MNG_MAC = 1, /* manage MAC address */
+	ENETC_MSG_CMD_MNG_RX_MAC_FILTER,/* manage RX MAC table */
+	ENETC_MSG_CMD_MNG_RX_VLAN_FILTER /* manage RX VLAN table */
+};
+
+/* VSI-PSI command action types */
+enum enetc_msg_cmd_action_type {
+	ENETC_MSG_CMD_MNG_ADD = 1,
+	ENETC_MSG_CMD_MNG_REMOVE
+};
+
+/* PSI-VSI command header format */
+struct enetc_msg_cmd_header {
+	u16 type;	/* command class type */
+	u16 id;		/* denotes the specific required action */
+};
+
 /* Common H/W utility functions */
 
 static inline void enetc_enable_rxvlan(struct enetc_hw *hw, int si_idx,