enetc: Introduce basic PF and VF ENETC ethernet drivers

ENETC is a multi-port virtualized Ethernet controller supporting GbE
designs and Time-Sensitive Networking (TSN) functionality.
ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated
Endpoint (RCIE).  As such, it contains multiple physical (PF) and
virtual (VF) PCIe functions, discoverable by standard PCI Express.

Introduce basic PF and VF ENETC ethernet drivers.  The PF has access to
the ENETC Port registers and resources and makes the required privileged
configurations for the underlying VF devices.  Common functionality is
controlled through so called System Interface (SI) register blocks, PFs
and VFs own a SI each.  Though SI register blocks are almost identical,
there are a few privileged SI level controls that are accessible only to
PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI).
As such, the bulk of the code, including datapath processing, basic h/w
offload support and generic pci related configuration, is shared between
the 2 drivers and is factored out in common source files (i.e. enetc.c).

Major functionalities included (for both drivers):
MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs
to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and
jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G
support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and
initial control ring support, VLAN extraction/ insertion, PF Rx VLAN
CTAG filtering, VF mac address config support, VF VLAN isolation support,
etc.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 32 insertions, 0 deletions

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
new file mode 100644
index 000000000000..a990eb6a85f7
--- /dev/null
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/* Copyright 2017-2019 NXP */
+
+#include "enetc.h"
+
+#define ENETC_PF_NUM_RINGS	8
+
+enum enetc_mac_addr_type {UC, MC, MADDR_TYPE};
+#define ENETC_MAX_NUM_MAC_FLT	((ENETC_MAX_NUM_VFS + 1) * MADDR_TYPE)
+
+#define ENETC_MADDR_HASH_TBL_SZ	64
+struct enetc_mac_filter {
+	union {
+		char mac_addr[ETH_ALEN];
+		DECLARE_BITMAP(mac_hash_table, ENETC_MADDR_HASH_TBL_SZ);
+	};
+	int mac_addr_cnt;
+};
+
+#define ENETC_VLAN_HT_SIZE	64
+
+struct enetc_pf {
+	struct enetc_si *si;
+	int num_vfs; /* number of active VFs, after sriov_init */
+	int total_vfs; /* max number of VFs, set for PF at probe */
+
+	struct enetc_mac_filter mac_filter[ENETC_MAX_NUM_MAC_FLT];
+
+	char vlan_promisc_simap; /* bitmap of SIs in VLAN promisc mode */
+	DECLARE_BITMAP(vlan_ht_filter, ENETC_VLAN_HT_SIZE);
+	DECLARE_BITMAP(active_vlans, VLAN_N_VID);
+};