diff options
| author | Bruce Allan <bruce.w.allan@intel.com> | 2013-03-20 11:23:11 +0400 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2013-03-28 11:01:52 +0400 |
| commit | d495bcb84d2c3abb5ad5e43cfeea0e305ceffb30 (patch) | |
| tree | 6edb94fb74a39dee627bbaeb39b3d21df84acc29 /drivers/net/ethernet/intel/e1000e/netdev.c | |
| parent | ea8179a72844b30d046cdcc932231872f2dbcc90 (diff) | |
| download | linux-d495bcb84d2c3abb5ad5e43cfeea0e305ceffb30.tar.xz | |
e1000e: EEE capability advertisement not set/disabled as required
Devices supported by the driver which support EEE (currently 82579, I217
and I218) are advertising EEE capabilities during auto-negotiation even
when EEE has been disabled. In addition to not acting as expected, this
also caused the EEE status reported by 'ethtool --show-eee' to be wrong
when two of these devices are connected back-to-back and EEE is disabled
on one. In addition to fixing this issue, the ability for the user to
specify which speeds (100 or 1000 full-duplex) to advertise EEE support
has been added.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 142ca39a68f6..0459fe3a06bd 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3875,6 +3875,38 @@ void e1000e_reset(struct e1000_adapter *adapter) /* initialize systim and reset the ns time counter */ e1000e_config_hwtstamp(adapter); + /* Set EEE advertisement as appropriate */ + if (adapter->flags2 & FLAG2_HAS_EEE) { + s32 ret_val; + u16 adv_addr; + + switch (hw->phy.type) { + case e1000_phy_82579: + adv_addr = I82579_EEE_ADVERTISEMENT; + break; + case e1000_phy_i217: + adv_addr = I217_EEE_ADVERTISEMENT; + break; + default: + dev_err(&adapter->pdev->dev, + "Invalid PHY type setting EEE advertisement\n"); + return; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) { + dev_err(&adapter->pdev->dev, + "EEE advertisement - unable to acquire PHY\n"); + return; + } + + e1000_write_emi_reg_locked(hw, adv_addr, + hw->dev_spec.ich8lan.eee_disable ? + 0 : adapter->eee_advert); + + hw->phy.ops.release(hw); + } + if (!netif_running(adapter->netdev) && !test_bit(__E1000_TESTING, &adapter->state)) { e1000_power_down_phy(adapter); @@ -6540,6 +6572,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_flashmap; } + /* Set default EEE advertisement */ + if (adapter->flags2 & FLAG2_HAS_EEE) + adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T; + /* construct the net_device struct */ netdev->netdev_ops = &e1000e_netdev_ops; e1000e_set_ethtool_ops(netdev); |