ice: remove FW logging code

The FW logging code doesn't work because there is no way to set
cq_ena or uart_ena so remove the code. This code is the original
(v1) way of FW logging so it should be replaced with the v2 way.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

1 files changed, 0 insertions, 78 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index adf7a5c78f85..39be6312b49b 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -2094,78 +2094,6 @@ struct ice_aqc_add_rdma_qset_data {
 	struct ice_aqc_add_tx_rdma_qset_entry rdma_qsets[];
 };
 
-/* Configure Firmware Logging Command (indirect 0xFF09)
- * Logging Information Read Response (indirect 0xFF10)
- * Note: The 0xFF10 command has no input parameters.
- */
-struct ice_aqc_fw_logging {
-	u8 log_ctrl;
-#define ICE_AQC_FW_LOG_AQ_EN		BIT(0)
-#define ICE_AQC_FW_LOG_UART_EN		BIT(1)
-	u8 rsvd0;
-	u8 log_ctrl_valid; /* Not used by 0xFF10 Response */
-#define ICE_AQC_FW_LOG_AQ_VALID		BIT(0)
-#define ICE_AQC_FW_LOG_UART_VALID	BIT(1)
-	u8 rsvd1[5];
-	__le32 addr_high;
-	__le32 addr_low;
-};
-
-enum ice_aqc_fw_logging_mod {
-	ICE_AQC_FW_LOG_ID_GENERAL = 0,
-	ICE_AQC_FW_LOG_ID_CTRL,
-	ICE_AQC_FW_LOG_ID_LINK,
-	ICE_AQC_FW_LOG_ID_LINK_TOPO,
-	ICE_AQC_FW_LOG_ID_DNL,
-	ICE_AQC_FW_LOG_ID_I2C,
-	ICE_AQC_FW_LOG_ID_SDP,
-	ICE_AQC_FW_LOG_ID_MDIO,
-	ICE_AQC_FW_LOG_ID_ADMINQ,
-	ICE_AQC_FW_LOG_ID_HDMA,
-	ICE_AQC_FW_LOG_ID_LLDP,
-	ICE_AQC_FW_LOG_ID_DCBX,
-	ICE_AQC_FW_LOG_ID_DCB,
-	ICE_AQC_FW_LOG_ID_NETPROXY,
-	ICE_AQC_FW_LOG_ID_NVM,
-	ICE_AQC_FW_LOG_ID_AUTH,
-	ICE_AQC_FW_LOG_ID_VPD,
-	ICE_AQC_FW_LOG_ID_IOSF,
-	ICE_AQC_FW_LOG_ID_PARSER,
-	ICE_AQC_FW_LOG_ID_SW,
-	ICE_AQC_FW_LOG_ID_SCHEDULER,
-	ICE_AQC_FW_LOG_ID_TXQ,
-	ICE_AQC_FW_LOG_ID_RSVD,
-	ICE_AQC_FW_LOG_ID_POST,
-	ICE_AQC_FW_LOG_ID_WATCHDOG,
-	ICE_AQC_FW_LOG_ID_TASK_DISPATCH,
-	ICE_AQC_FW_LOG_ID_MNG,
-	ICE_AQC_FW_LOG_ID_MAX,
-};
-
-/* Defines for both above FW logging command/response buffers */
-#define ICE_AQC_FW_LOG_ID_S		0
-#define ICE_AQC_FW_LOG_ID_M		(0xFFF << ICE_AQC_FW_LOG_ID_S)
-
-#define ICE_AQC_FW_LOG_CONF_SUCCESS	0	/* Used by response */
-#define ICE_AQC_FW_LOG_CONF_BAD_INDX	BIT(12)	/* Used by response */
-
-#define ICE_AQC_FW_LOG_EN_S		12
-#define ICE_AQC_FW_LOG_EN_M		(0xF << ICE_AQC_FW_LOG_EN_S)
-#define ICE_AQC_FW_LOG_INFO_EN		BIT(12)	/* Used by command */
-#define ICE_AQC_FW_LOG_INIT_EN		BIT(13)	/* Used by command */
-#define ICE_AQC_FW_LOG_FLOW_EN		BIT(14)	/* Used by command */
-#define ICE_AQC_FW_LOG_ERR_EN		BIT(15)	/* Used by command */
-
-/* Get/Clear FW Log (indirect 0xFF11) */
-struct ice_aqc_get_clear_fw_log {
-	u8 flags;
-#define ICE_AQC_FW_LOG_CLEAR		BIT(0)
-#define ICE_AQC_FW_LOG_MORE_DATA_AVAIL	BIT(1)
-	u8 rsvd1[7];
-	__le32 addr_high;
-	__le32 addr_low;
-};
-
 /* Download Package (indirect 0x0C40) */
 /* Also used for Update Package (indirect 0x0C41 and 0x0C42) */
 struct ice_aqc_download_pkg {
@@ -2507,8 +2435,6 @@ struct ice_aq_desc {
 		struct ice_aqc_add_rdma_qset add_rdma_qset;
 		struct ice_aqc_add_get_update_free_vsi vsi_cmd;
 		struct ice_aqc_add_update_free_vsi_resp add_update_free_vsi_res;
-		struct ice_aqc_fw_logging fw_logging;
-		struct ice_aqc_get_clear_fw_log get_clear_fw_log;
 		struct ice_aqc_download_pkg download_pkg;
 		struct ice_aqc_set_cgu_input_config set_cgu_input_config;
 		struct ice_aqc_get_cgu_input_config get_cgu_input_config;
@@ -2717,10 +2643,6 @@ enum ice_adminq_opc {
 
 	/* Standalone Commands/Events */
 	ice_aqc_opc_event_lan_overflow			= 0x1001,
-
-	/* debug commands */
-	ice_aqc_opc_fw_logging				= 0xFF09,
-	ice_aqc_opc_fw_logging_info			= 0xFF10,
 };
 
 #endif /* _ICE_ADMINQ_CMD_H_ */