ice: Support configuring the device to Double VLAN Mode

In order to support configuring the device in Double VLAN Mode (DVM),
the DDP and FW have to support DVM. If both support DVM, the PF that
downloads the package needs to update the default recipes, set the
VLAN mode, and update boost TCAM entries.

To support updating the default recipes in DVM, add support for
updating an existing switch recipe's lkup_idx and mask. This is done
by first calling the get recipe AQ (0x0292) with the desired recipe
ID. Then, if that is successful update one of the lookup indices
(lkup_idx) and its associated mask if the mask is valid otherwise
the already existing mask will be used.

The VLAN mode of the device has to be configured while the global
configuration lock is held while downloading the DDP, specifically after
the DDP has been downloaded. If supported, the device will default to
DVM.

Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

1 files changed, 63 insertions, 1 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index 72214c609cf5..fd8ee5b7f596 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -226,6 +226,15 @@ struct ice_aqc_get_sw_cfg_resp_elem {
 #define ICE_AQC_GET_SW_CONF_RESP_IS_VF		BIT(15)
 };
 
+/* Set Port parameters, (direct, 0x0203) */
+struct ice_aqc_set_port_params {
+	__le16 cmd_flags;
+#define ICE_AQC_SET_P_PARAMS_DOUBLE_VLAN_ENA	BIT(2)
+	__le16 bad_frame_vsi;
+	__le16 swid;
+	u8 reserved[10];
+};
+
 /* These resource type defines are used for all switch resource
  * commands where a resource type is required, such as:
  * Get Resource Allocation command (indirect 0x0204)
@@ -283,6 +292,40 @@ struct ice_aqc_alloc_free_res_elem {
 	struct ice_aqc_res_elem elem[];
 };
 
+/* Request buffer for Set VLAN Mode AQ command (indirect 0x020C) */
+struct ice_aqc_set_vlan_mode {
+	u8 reserved;
+	u8 l2tag_prio_tagging;
+#define ICE_AQ_VLAN_PRIO_TAG_S			0
+#define ICE_AQ_VLAN_PRIO_TAG_M			(0x7 << ICE_AQ_VLAN_PRIO_TAG_S)
+#define ICE_AQ_VLAN_PRIO_TAG_NOT_SUPPORTED	0x0
+#define ICE_AQ_VLAN_PRIO_TAG_STAG		0x1
+#define ICE_AQ_VLAN_PRIO_TAG_OUTER_CTAG		0x2
+#define ICE_AQ_VLAN_PRIO_TAG_OUTER_VLAN		0x3
+#define ICE_AQ_VLAN_PRIO_TAG_INNER_CTAG		0x4
+#define ICE_AQ_VLAN_PRIO_TAG_MAX		0x4
+#define ICE_AQ_VLAN_PRIO_TAG_ERROR		0x7
+	u8 l2tag_reserved[64];
+	u8 rdma_packet;
+#define ICE_AQ_VLAN_RDMA_TAG_S			0
+#define ICE_AQ_VLAN_RDMA_TAG_M			(0x3F << ICE_AQ_VLAN_RDMA_TAG_S)
+#define ICE_AQ_SVM_VLAN_RDMA_PKT_FLAG_SETTING	0x10
+#define ICE_AQ_DVM_VLAN_RDMA_PKT_FLAG_SETTING	0x1A
+	u8 rdma_reserved[2];
+	u8 mng_vlan_prot_id;
+#define ICE_AQ_VLAN_MNG_PROTOCOL_ID_OUTER	0x10
+#define ICE_AQ_VLAN_MNG_PROTOCOL_ID_INNER	0x11
+	u8 prot_id_reserved[30];
+};
+
+/* Response buffer for Get VLAN Mode AQ command (indirect 0x020D) */
+struct ice_aqc_get_vlan_mode {
+	u8 vlan_mode;
+#define ICE_AQ_VLAN_MODE_DVM_ENA	BIT(0)
+	u8 l2tag_prio_tagging;
+	u8 reserved[98];
+};
+
 /* Add VSI (indirect 0x0210)
  * Update VSI (indirect 0x0211)
  * Get VSI (indirect 0x0212)
@@ -494,9 +537,13 @@ struct ice_aqc_add_get_recipe {
 
 struct ice_aqc_recipe_content {
 	u8 rid;
+#define ICE_AQ_RECIPE_ID_S		0
+#define ICE_AQ_RECIPE_ID_M		(0x3F << ICE_AQ_RECIPE_ID_S)
 #define ICE_AQ_RECIPE_ID_IS_ROOT	BIT(7)
 #define ICE_AQ_SW_ID_LKUP_IDX		0
 	u8 lkup_indx[5];
+#define ICE_AQ_RECIPE_LKUP_DATA_S	0
+#define ICE_AQ_RECIPE_LKUP_DATA_M	(0x3F << ICE_AQ_RECIPE_LKUP_DATA_S)
 #define ICE_AQ_RECIPE_LKUP_IGNORE	BIT(7)
 #define ICE_AQ_SW_ID_LKUP_MASK		0x00FF
 	__le16 mask[5];
@@ -507,15 +554,25 @@ struct ice_aqc_recipe_content {
 	u8 rsvd0[3];
 	u8 act_ctrl_join_priority;
 	u8 act_ctrl_fwd_priority;
+#define ICE_AQ_RECIPE_FWD_PRIORITY_S	0
+#define ICE_AQ_RECIPE_FWD_PRIORITY_M	(0xF << ICE_AQ_RECIPE_FWD_PRIORITY_S)
 	u8 act_ctrl;
+#define ICE_AQ_RECIPE_ACT_NEED_PASS_L2	BIT(0)
+#define ICE_AQ_RECIPE_ACT_ALLOW_PASS_L2	BIT(1)
 #define ICE_AQ_RECIPE_ACT_INV_ACT	BIT(2)
+#define ICE_AQ_RECIPE_ACT_PRUNE_INDX_S	4
+#define ICE_AQ_RECIPE_ACT_PRUNE_INDX_M	(0x3 << ICE_AQ_RECIPE_ACT_PRUNE_INDX_S)
 	u8 rsvd1;
 	__le32 dflt_act;
+#define ICE_AQ_RECIPE_DFLT_ACT_S	0
+#define ICE_AQ_RECIPE_DFLT_ACT_M	(0x7FFFF << ICE_AQ_RECIPE_DFLT_ACT_S)
+#define ICE_AQ_RECIPE_DFLT_ACT_VALID	BIT(31)
 };
 
 struct ice_aqc_recipe_data_elem {
 	u8 recipe_indx;
 	u8 resp_bits;
+#define ICE_AQ_RECIPE_WAS_UPDATED	BIT(0)
 	u8 rsvd0[2];
 	u8 recipe_bitmap[8];
 	u8 rsvd1[4];
@@ -1888,7 +1945,7 @@ struct ice_aqc_get_clear_fw_log {
 };
 
 /* Download Package (indirect 0x0C40) */
-/* Also used for Update Package (indirect 0x0C42) */
+/* Also used for Update Package (indirect 0x0C41 and 0x0C42) */
 struct ice_aqc_download_pkg {
 	u8 flags;
 #define ICE_AQC_DOWNLOAD_PKG_LAST_BUF	0x01
@@ -2014,6 +2071,7 @@ struct ice_aq_desc {
 		struct ice_aqc_sff_eeprom read_write_sff_param;
 		struct ice_aqc_set_port_id_led set_port_id_led;
 		struct ice_aqc_get_sw_cfg get_sw_conf;
+		struct ice_aqc_set_port_params set_port_params;
 		struct ice_aqc_sw_rules sw_rules;
 		struct ice_aqc_add_get_recipe add_get_recipe;
 		struct ice_aqc_recipe_to_profile recipe_to_profile;
@@ -2115,10 +2173,13 @@ enum ice_adminq_opc {
 
 	/* internal switch commands */
 	ice_aqc_opc_get_sw_cfg				= 0x0200,
+	ice_aqc_opc_set_port_params			= 0x0203,
 
 	/* Alloc/Free/Get Resources */
 	ice_aqc_opc_alloc_res				= 0x0208,
 	ice_aqc_opc_free_res				= 0x0209,
+	ice_aqc_opc_set_vlan_mode_parameters		= 0x020C,
+	ice_aqc_opc_get_vlan_mode_parameters		= 0x020D,
 
 	/* VSI commands */
 	ice_aqc_opc_add_vsi				= 0x0210,
@@ -2209,6 +2270,7 @@ enum ice_adminq_opc {
 
 	/* package commands */
 	ice_aqc_opc_download_pkg			= 0x0C40,
+	ice_aqc_opc_upload_section			= 0x0C41,
 	ice_aqc_opc_update_pkg				= 0x0C42,
 	ice_aqc_opc_get_pkg_info_list			= 0x0C43,